ex cell o used for sale

; Gross weight [kg]: 7970; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

; Gross weight [kg]: 8380; Engine: KTA38-G14; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Liquid filter ORSTA AC 40/1-25 TGL 21541 ND 250 bar New ! Dimensions: 400 x 170 x 165 mm

cutting diameter: 250 mm saw band length: 0 mm cutting width: mm workpiece dia.: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mm y-travel: 410 mm z-travel: 450 mm : travel: x vor 1000 mm control: mc4va total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 1.377 Felder Shelving Shelves, Yards, Shelves 1.30m Width, Depth 0.60m, Frame Height 2.50m - Used - : Price ex site, (net), dismantled, packed and loaded. per base field (with 2 frames and 5 shelves): 89.-€ Per cultivation field (1 frame and 5 shelves): up to 20 cultivation fields: 75.-€ from 21 cultivation fields: 69.-€ from 50 cultivation fields: 65.-€ from 100 cultivation fields: 62,50.-€ from 500 cultivation fields: 59.-€ for complete acceptance: 55.-€ Manufacturer: Hofe Type: Orion Plus, HZG25613XL Year of construction: 2012 / 2013 approx. 5 shelves per field Dimensions per shelf: approx. 1.30m x 60cm Frame height approx.: 2.50m Load capacity per floor: 190kg Bay load: 1,000kg (on some nameplates there is an indication of 200kg, which is due to the load capacity of the platform where the shelves are on it, the shelves carry 1,000kg) ...

Three-phase electric motor with brake ORIENTAL MOTOR 51K90GU - SWM ( 51K90GU-SWM ) 90 W 1300 rpm 200 V 3AC 50 Hz 60 Hz - Operation is possible ! Shaft with gear: Diameter: Ø 11 mm, Length: 20 mm, Teeth: 10 Flange: Ø 83 mm / 90 x 90 mm Bolt circle diameter: Ø 104 mm Hole diameter: Ø 7 mm approx. 0.5 m Connection cable Used, tested ! Dimensions: 200 x 107 x 92 mm

turning diameter: 380 mm turning length: 700 mm control: SIEMENS spindle turning speed - stepless: 2500 U/min tailstock quill taper MT: 4 weight: 1.5 t dimensions of the machine ca.: 2000x1400x1820 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GE Oil & Gas Nuovo Pignone Steam Turbine – Model SC1-10 For sale: Industrial Steam Turbine manufactured by GE Oil & Gas (Nuovo Pignone). Model SC1-10 (Equipment Tag: 661-KT-4101). This equipment is decommissioned and ready for transport. Ideal for power generation or as a mechanical drive for heavy-duty industrial compressors in refining, petrochemical, or power plants. Key Specifications: Manufacturer: GE Oil & Gas / Nuovo Pignone Equipment Type: Steam Turbine Model: SC1-10 Equipment Tag: 661-KT-4101 Condition: Used / Decommissioned. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets, performance curves, or to arrange a site inspection.

Liquid filter ORSTA ACC 40/1-25 TGL 21541 ND 25 bar New ! Dimensions: 400 x 160 x 170 mm

Liquid filter ORSTA AC 16/1-63 TGL 21541 ND 25 bar New ! Dimensions: 200 x 120 x 100 mm

Liquid filter ORSTA BCC 10/1-25 TGL 21541 ND 10 bar New ! Dimensions: 160 x 140 x 100 mm

GE Nuovo Pignone Backpressure Steam Turbine – Model SNC1-2 For sale: Industrial Backpressure Steam Turbine manufactured by GE Oil & Gas (Nuovo Pignone). Model SNC1-2 (Equipment Tag: 661-KT-3301). The equipment is decommissioned and prepared for safe transport. Ideal for mechanical drive applications or cogeneration in industrial plants, refineries, and petrochemical facilities. Key Specifications: Manufacturer: GE Oil & Gas / Nuovo Pignone Equipment Type: Backpressure Steam Turbine Model: SNC1-2 Equipment Tag: 661-KT-3301 Condition: Used / Decommissioned. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets, performance curves, or to arrange a site inspection.

Liquid filter, return filter, without maintenance indicator ORSTA BCC 16/1-25 ( BCC 16/1-25 ) TGL 21541 ND: 10 bar (1.0 MPa) for tank installation without rubber seal! New ! Dimensions: 205 x 145 x 105 mm

Liquid filter ORSTA ACB 16/1-10 TGL 21541 ND 25 bar with electric clogging indicator TGL 15687 New ! Dimensions: 200 x 120 x 120 mm

This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details.

Liquid filter ORSTA BCD 10/1-25 TGL 21541 ND 10 bar with electric clogging indicator New ! Dimensions: 190 x 150 x 100 mm

Liquid filter ORSTA BCA 32/1-25 TGL 21541 ND 10 bar New ! Dimensions: 390 x 210 x 200 mm

Liquid filter ORSTA, FILTERBAU DESSAU ACC 20 x 25 TGL 21541 ND 25 bar New ! Dimensions: 210 x 145 x 120 mm

Rated voltage: 12 kV, length: 4430 mm, height: 1700 mm, including documentation. An on-site inspection is possible.

This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details.

Gear Motor with Brake ORIENTAL MOTOR 5GU12.5KB / 5RK90GU-CMF2 ( 5GU12.5KB /5RK90GU-CMF2 ) 1250 / 1500 rpm 200 V Dimensions 300 x 160 x 120 mm

20126,000 mm

Geared Motor ORIENTAL MOTOR BO213-444 220 V Dimensions 220 x 120 x 80 mm

ThyssenKruppHPD 4037-OEM20214000 bar3.8 l/min19 mm37 kW1980 kgused, low operating hours per seller

Hydraulic motor, gerotor motor ORSTA Parchim 05 80/16-01 TGL10881 Nominal pressure 16 Mpa New ! Dimensions 250 x 110 x 110 mm

This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details.

Throttle valve, hydraulic valve ORSTA 10/2/11 TGL 26243 / 30 Pn 32 MPa without key Dimensions: 130 x 75 x 45 mm

This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details.

Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.

Gate Gate Pump, Hydraulic Pump with Motor ORSTA TGL 10885 ( TGL10885 ) 32 6,32 3 16/1 KMR132 114 A G TWS TGL11856/0 140 bar 7.5 KW 11445 rpm 380 / 660 V Dimensions 1000 x 360 x 380 mm

Throttle valve, hydraulic valve ORSTA 10.2.11 TGL 26243 / 30 Pn 32 MPa with key Dimensions: 130 x 75 x 45 mm

TIG-TIG Welding Machine Oerlikon DTG 201 Manufacturer: Oerlikon Schweißtechnik GmbH, Eisenberg/Palatinate. Made in Germany. Handy and portable TIG DC inverter system, also suitable for welding with rod electrodes. 380 volts. Welding performance: 200 A / 10.2 V at 60% ED. 160 A / 34 V at 100% ED. HF ignition. Pulse rate and pulse width adjustable. Dot time controller 0.5 to 5 sec. TIG full program with starting current, current increase, Fundamental and pulse current, Current lowering and crater filling current. Automatic throttle shut-off. With hosepack, TIG welding torch and ground cable. Without gas bottle. Areas of application & details: TIG-TIG welding machine Oerlikon DTG 201, TIG/TIG welding machine, industrial TIG welding machine, TIG DC inverter, arc welding machine.

Globe valve, hydraulic valve ORSTA TGL 21575 Nominal pressure: 16 MPa (160Bar) Nominal diameter: 10 mm Dimensions: 80 x 60 x 45 mm

Shut-off valve, hydraulic valve ORSTA TGL 21575 nominal pressure: 16 MPa (160 bar) nominal diameter: 13 mm square: 9 x 9 mm New ! Dimensions: 75 x 40 x 55 mm

Shut-off valve, hydraulic valve ORSTA TGL 21575 Nominal pressure: 32 MPa nominal diameter: 10 mm Dimensions: 80 x 60 x 45 mm

Throttle valve, hydraulic valve ORSTA 16 - 2 .01 TGL 26243/30 Rv Nominal pressure: 16 MPa Dimensions: 155 x 150 x 45 mm

Throttle valve, hydraulic valve ORSTA 16 - 1. 01 / 0 TGL 26243/30 Rv Nominal pressure: 16 MPa used, tested ! Dimensions: 155 x 150 x 45 mm

Throttle valve, hydraulic valve, for pipeline installation ORSTA 12-2.01 TGL 26243 / 30 Nominal pressure: 16 MPa ( 160 bar) Actuator: Actuator with lock nut, sealable ! New ! Dimensions: 130 x 107 x 35 mm

Throttle valve, hydraulic valve ORSTA 12-2.02/0 TGL 26243/30 RV Nominal pressure: 16 MPa ( 160 bar ) used ! Dimensions: 125 x 100 x 45 mm

sheet width: 2000 mm plate thickness: max. 4000 mm make: 2974 rear stop: ja foot pedal: ja degree: steuerbar weight of the machine ca.: 3,93 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Throttle valve, hydraulic valve ORSTA 06 - 2. 01 TGL 26243/30 Rv Nominal pressure: 16 MPa New ! Dimensions: 120 x 90 x 30 mm

Throttle valve, hydraulic valve ORSTA 08 - 1.01 / 0 TGL 26243/30 Rv Nominal pressure: 16 MPa Dimensions: 120 x 90 x 30 mm

Throttle valve, hydraulic valve ORSTA 08 - 2.0 TGL 26243/30 Rv Nominal pressure: 16 MPa Dimensions: 120 x 90 x 30 mm

Throttle valve, hydraulic valve ORSTA 10 - 2. 01 TGL 26243/30 Rv Nominal pressure: 16 MPa Dimensions: 80 x 120 x 35 mm

Throttle valve, hydraulic valve ORSTA 20 - 1. 01 TGL 26243/30 Rv Nominal pressure: 16 MPa used, tested ! Dimensions: 165 x 145 x 50 mm

Throttle valve, hydraulic valve ORSTA 20 - 2. 01 TGL 26243/30 Rv Nominal pressure: 16 MPa Dimensions: 165 x 145 x 50 mm

Used Used oil filler Rcm 16 valves: Year: 1998 Condition: As Is Used oil filler Rcm 16 valves year: 1998 speed: 2.000 bph clockwise directions safety protections working machine Code: T 11 More details: https://bottlingscout.com

Throttle valve, hydraulic valve ORSTA 06 - 1. 01 / 0 TGL 26243/30 Rv Nominal pressure: 16 MPa Dimensions: 120 x 90 x 30 mm