ex cell o used for sale

bore capacity in steel (diameter): 13 mm throat: 235 mm bore stroke: 60 mm spindle taper: B 16 spindle turning speed - stepless: 100-3000 U/min table surface area: 290x270 mm column diameter: Ø 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Manufacturer: Siemens-Schuckertwerke, electric motor type OR624-4 -Power: 3.0 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: P33 -Dimensions: 370/290/H250 mm -Weight: 40 kg

; Gross weight [kg]: 1370; Inspection Date: 0026-06-08; Lift height[mm]: 580; Maximum lift capacity [kg]: 230

Inverter welding machine, power source, digital control inverter -Manufacturer, Type: OTC DAIHEN, DP-500 -Welding current range: 500A 60%, 350A 100% -Mains connection: 400 V -Software version: P10499 Ver003. 200,000 Accessories: as shown in the pictures -Dimensions: 700/300/H600 mm -Weight: 57 kg

Komptech Multistar One Star screen with electric drive #6929 Facilities Multistar ONE EU Declaration of Conformity Feed hopper Anthology Machine documentation 5 inch touch panel Electric Hydraulic Pump HyDrive 2.0 MS ONE Doppstadt Siebdeck 60/90 Drive motors (2 pcs.) Fine grain discharge belt Oversize discharge belt Hook Lift axle Shunting drawbar Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 350-450 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: BxTxH 1500x1500x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ASHE Age: 2024 Sno. 1223-24 Typ: Onyx Series Model: 135-60 Speed: 350m/min- max unrestricted speed Web width range: 300 mm (min)- 1350 mm (max) Slitting width Range: 25 mm ( min) - 1100 mm (max) Slitting configuration: 10 x Male Rotary Holders & Blades 10 x Female rotary Blades & Backup Spacers 1 x Set Grooved Female Spacers 16 x Square Bar Razor holders & blades Unwind configuration: Integrated Shaftless Unwind Unwind Control Method: Unwind tension control via multi-pad break system Unwind diameter (max): 1000 mm Unwind roll weight: 750 kg Unwind Tension Range: 5-30 kg Unwind core size: 76 mm & 152 mm Rewind configuration: Rewind Tension range: 5-25 kg Rewind diameter (Max): 600 mm Rewind roll weight: 250 kg Rewind configuration: 2 x 76 mm ADS Blank rewind shafts 1 x full set of 76 mm Chucks 1 x Half set of 152 mm Chucks Pneumatic suppl ...

The Schwan Optimal 300+200 is a double industrial steam kettle designed for cooking, processing and thermal treatment of large food batches. The unit consists of two independent kettles with capacities of 300 and 200 litres, allowing simultaneous processing of different products while maximizing production flexibility. Manufactured from stainless steel, the kettle is suitable for food processing plants, central kitchens, meat processing facilities and professional catering operations. The dual-kettle design enables efficient workflow management and optimal utilization of production capacity. Technical Specifications Manufacturer: Schwan Apparatebau Model: Optimal 300+200-6/P5 Type: Double Industrial Steam Kettle Kettle Capacity: 300 L + 200 L Total Capacity: 500 L Material: Stainless Steel Voltage: 400 V Frequency: 50 Hz Power: 31 kW

Electric motor, three-phase motor, vibration motor, industrial vibration motor -Manufacturer: OLI MVE, Electric Vibration Motor -Type: MVE 500/15N-4OAO -Power: 0.25 kW -Speed: 1400 rpm -Protection rating: IP66 -Dimensions: 330/175/H195 mm -Weight: 20.9 kg

bore capacity in steel (diameter): Ø 25 mm throat: 209 mm bore stroke: 95 mm turning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mm distance spindle /table: 770 mm spindle turning speed range: 200-2440 U/min total power requirement: 0,75 kW weight of the machine ca.: 105 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel

Strip cylinder HÖBRIGER-ORIGA Ø 40 x 500 stroke series 120

; Accessories: Options:, , - DPX-28051 = Socket box: 2x 32A - 2x 16A 3P, - DPX-28052 = Socket box: 63A - 32A - 2X 16A 3P, - DPX-28053 = Socket box: 2x 32A - 2x Schucko 230V, - DPX-28054 = Socket box: 63A - 32A - 16A 5P - 2x 16A 3P, - DPX-28055 = Socket box: 125A- 63A -

Hydraulic Pump ORSTA B 25 R ( B25R ) PT 11112 / 04

Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) motor: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm

Siemens Tube OPTI 150/30/50 HC Tubular housing: OPTI 150/30/50 HC - 100, Model No. 4803404 Tube Model No. 4803388 Focal spot 0.6/1.0 Depth Aperture Model No. 8375040 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as  ...

Hydraulic power unit ORSTA B.604.263 Delivery pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Hydraulic power unit ORSTA S4/63 P = 63 kp/cm² Q = 4 l/min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 1000 x 700 x 580 mm

used beautiful crucible.

Hydraulic power unit, micro power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) engine: 1.1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

Hydraulic power unit ORSTA with gear pump C10-2R, TGL 10859 motor: 1.1 kW used, tested ! Dimensions: 750 x 500 x 930 mm

nice well-kept jar

nice well-kept jar

well-kept crucible

Hydraulic power unit with gate gate pump ORSTA pump: 16/16-1 TGL 10885 p: 16 Mpa (160 bar) V: 16 cm3/U motor: 1,1,00 5 kW 940 rpm 220 / 380 V tank: 75 l as a spare part for Hohenstein RBT400 !' used, tested ! Dimensions: 920 x 430 x 780 mm

Hydraulic Power Unit with Gate Gate Pump ORSTA pump1: 10/16-1 TGL 10889 pump2: C2,5-2 L TGL 10885 motor: 1.5 kW 935 rpm 220 / 380 V Tank: 80 l used, tested ! Dimensions: 920 x 520 x 1350 mm

well-kept crucible

Time relay, safety time relay, safety controller, timer, time switch, mini counter, timer, time relay -Manufacturer: Omron, mini counter timer, unused, original packaging -Type: AK-60 -Voltage: 240 V / 50/60 Hz -Quantity: 1x Timer available -Cardboard dimensions: 140/115/H110 mm -Weight: 0.7 kg

Hydraulic power unit with tank, universal power unit ORSTA 10/6. 3 - 63.0/01 TGL 10897 63 bar 10 l/min engine: 1.5 kW 220 / 380 V Tank: 80 l used, tested ! Dimensions: 1180 x 640 x 1310 mm

Demolition shears, demolition pliers, hydraulic demolition shears -Demolition shears: Hydraulic demolition shears, without hydraulic power unit -Opening width: 290 mm -Transport dimensions: 950/800 (H140 mm -Weight: 94 kg

This 3-axis HAGE 3D Mex-One-A was manufactured in 2024. It features a build area of 400 mm x 600 mm x 440 mm and a heated print bed that reaches up to 180 °C. The machine is designed for unmanned 24/7 operation and includes an advanced filtration system for effective exhaust air purification. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Mex-One-A plastic 3D printer we have for sale. Contact us for further details.

This 3-axis PAVONI V2400 Open Top was manufactured in 2011. It features an X-axis travel of 2360 mm, Y-axis travel of 1800 mm, and Z-axis travel of 300 mm. The machine is equipped with a powerful 7.5 HP spindle and operates at speeds ranging from 1000 to 12000 RPM. If you are looking to get high-quality machining capabilities, consider the PAVONI V2400 Open Top vertical machining centre we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2008. This Okuma ES-L10II features a maximum turning diameter of 390 mm and a maximum turning length of 500 mm. It is equipped with a 10 chuck and a robust Okuma MQ Turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma ES-L10II machine we have for sale. Contact us for further details regarding this machine.

This 3-axis Optimum F310 vertical machining centre was manufactured in 2016. It features a maximum spindle speed of 10,000 rpm and a spindle motor power of 13 kW. The machine is equipped with a CNC-controlled dividing head with 2 rotary axes, which has never been used. If you are looking to get high-quality machining capabilities, consider the Optimum F310 machine we have for sale. Contact us for further details.

This 6-axis OTC Daihen DR4200 welding robot was manufactured in 1998. It includes a teach pendant, DR controller, and a welding power source rated at 350A. Additionally, it comes with a second OTC DR4200 robot, also equipped with a teach pendant and a 500A welding power source. If you are looking to get high-quality welding capabilities, consider the OTC Daihen DR4200 welding robot we have for sale. Contact us for further details.

Edgebander manufactured in 2017. This SCM Olimpic K360 T-ER1 features a feed speed of 11 m/min and accommodates edge thicknesses from 0.4 to 6 mm. It includes a pre-milling unit with counter-rotating diamond heads, an EVA glue unit, and a buffing unit. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K360 T-ER1 machine we have for sale. Contact us for further details.

OMAG / AFFRI 903 RSD Hardness Testing Machine Professional stationary benchtop hardness tester from the renowned Italian manufacturer OMAG di AFFRI DAVIDE s.r.l. (model 903 RSD). The device has been regularly tested and certified by the DAkkS-accredited laboratory 3-Rath Calibration + Testing Technology (last test on 28.04.2025 for the HRC procedure according to DIN EN ISO 9000ff). Technical data: Manufacturer: OMAG / AFFRI Group (Italy) Model: 903 RSD Serial Number: 76599 Test method: Rockwell (HRC calibrated, among others) Voltage: 115 – 230 V Weight / Test force: 195 Kgf Special feature: Height-adjustable probe for flexible workpiece sizes "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs  ...

Permanent magnet motor, geared motor, electric motor, servo motor -Max. speed: 1200 rpm -Drive power: 2.9 kW -Shaft: Ø 32 mm -Speed encoder -External cooling -Number: 1 engine available -Price: per piece -Weight: 70 kg/piece

A repairable Océ/Canon large-format monochrome plotter requiring repair is available. Print resolution: 600dpi, max. print speed: 2.74m/min, max. print width: 914mm, max. paper size: A0, max. roll length: 152m, max. output length: approx. 15m, scan resolution: 400dpi. Machine dimensions X/Y/Z: approx. 1400mm/1050mm/1300mm, weight: approx. 200kg. The mechanical system is defective. Documentation available. An on-site inspection is possible.

; Power [PS]: 239; Gross weight [kg]: 1533; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394