127,441 used machines on RESALE, but how to find them? Machine Search
saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Commonrail Pump Used from experimental setup. Few hours
CNC turret lathe Okuma LB15 at call The OKUMA LB 15 CNC lathe has been professionally serviced regularly since its purchase and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret holder for 12 tools. The turning spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Technical specifications of the CNC lathe OKUMA LB-15 – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Slain chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Diameter of the spindle bore: fi 75 mm (at a depth of 70 mm, measured from the front of the lathe chuck and without jaws) – Diameter of the spindle bore: fi 28 mm (at a depth of 200 mm, measured from the front of the lathe chuck and without jaw ...
Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg
Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg
Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg
Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120-25 -Stroke: max. 1310 mm -pneumatic: operated -p max.: 8 bar -Dimensions: 90/90/H1660 mm -Weight: 12 kg
Diameter: 710 mm Number of teeth: . St. Width of teeth: 6 mm Bore: 80 mm : 120 mm Thickness: 5 mm number: 30 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 63 mm -Piston rod: Ø 20 mm -Total length: 260 mm -Total length extended: 300 mm -Dimensions: 75/75/H260 mm -Weight: 2 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 63 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Total length: 250 mm -Total length extended: 313 mm -Dimensions: 53/53/H250 mm -Weight: 1 kg
Used spiral mixer DIOSNA / OASE, type: SPK 15 -in very good condition- - Use only in vocational school - for 15 kg of dough - Technical condition: very good - Machine inspected and cleaned, ready for immediate use -El. Connection: 380 V, 50 Hz, 6 A 1.1/2.2 kW - Boiler speed: 710 and 1,425 rpm Viewing and test run are possible by arrangement.
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 430 mm -Total length extended: 590 mm -Number: 4x available -Price: per piece -Dimensions: 95/95/H430 mm -Weight: 4.9 kg
Taper clamping bushes, clamping bush -Type: 1615 - 25 - Bore: 25mm -Dimensions: Ø 57/38 mm -Number: 2 available -Price per piece -Minimum purchase: complete -Weight: 0.41kg
Used loose curd line from OBRAM. New 2015. Line composition: - Plate whey cooler, - Whey tank, - Tubular thick curd coater, - Whey belt separator, - Paripac weigher/dosing machine. The machine is designed for dosing a specific quantity of product into the packaging machine. - Paripac bag packaging machine. Bagger designed for packing loose quark into bags. Packing weight 250/500 g.
heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece
electric motor, three-phase motor -Power: 0.75 kW -Speed: 910 rpm -Shaft diameter: 24 mm -Design: B3 -Protection rating: -Dimensions: 365/255/H215 mm -Weight: 33 kg
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1420 rpm -Shaft diameter: 22 mm -Construction: B3 -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 370/260/H220 mm -Weight: 34 kg
Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg
Capacity up to 6 tons For more details contact with us
Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg
Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Dimensions: 360/140/H200 mm -Weight: 11.8 kg
Gear motor, electric motor, electric gear motor -Speed: 80 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 33 -Dimensions: 420/250/H200 mm -Weight: 18.5 kg
Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.
Key data: 340 mm, 1000 mm, 5000 1/min
Control: OSP-P200 Turning length: 1,000 mm Turning diameter: 340 mm Vibration diameter above bed 580 mm Speed: 45 – 5,000 rpm Tool turret 12 places (driven) Bar passage 80 mm Direct recording: BMT 60 Equipment: - One touch IGF -Conveyor - Touchsetter - 3-jaw chuck (SMW 315 HB) passage 85 mm - NC tailstock - Multilingual control - Coolant pump 8 bar
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outside mount: MK8 (Ø80 mm to Ø75 mm) -Number: 10x recordings available -2x holder: inside tool MK6 -6x holder: inside tool MK5 -Price: per piece
Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 420/180/H160 mm -Weight: 16 kg
Line defrosting transformer, defrosting device, pipe defrosting device -Type: LA125 -Primary: 220 V/13 A -Secondary: 56 V/60-125 A -Dimensions: 430/200/H400 mm -Weight: 40 kg
Key data: 300 mm, 450 mm, 3800 1/min
Control OKUMA ... OSP-P300LA-e Turning diameter... 300mm Rotation length ... 450mm Inclined bed Spindle bore ... 68mm Tool changer... 12 Driven tools... 6 Bar feeder Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight ... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Spindle speed ... 38-3800 rpm. The machine is in good condition, possible to test under electricity.
Hydraulic power unit, hydraulic pump, hydraulic pump -Drive: 7.5 kW 1440 rpm -Dimensions: 360/310/H660 mm -Weight: 86 kg
Gear motor, electric motor -Speed: 160 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 325/210/H195 mm -Weight: 13 kg
Gear motor, electric motor -Speed: 118 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 400/200/H200 mm -Weight: 12.5 kg
CNC controlled three-axis under-table cross-cut saw with additional drilling unit for wood and wood-like materials, but also suitable for sawing aluminium non-ferrous metals and plastics. Closed compact production island, low noise pollution and no chips in the machine environment. Our automatic sawing and drilling machine KA 550 CNC - SAW and DRILL is versatile einsetzbar_ – Only saws in automatic mode and for single cuts - Drilling only - Combines drilling and sawing in a single operation The possibilities to work with the drilling unit include drilling and countersinking, combined drilling + countersinking with a combination tool, drill milling of longitudinal holes – longitudinal holes transversely – rectangular cut-outs. The drill feed speed and the drilling pressure can be sensitively adjusted. Technical data Circular Saw and Drilling Machine KA 550 CNC - SAW an ...
Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg
- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition
Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/355/H280 mm -Weight: 78 kg
Three-phase motor, electric motor -Power: 2.2 kW -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Brake: 250 V -Dimensions: 450/300/H250 mm -Weight: 53 kg
Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz
Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated -Power: 0.77 - 23 kW -Speed: 100 - 3000 rpm -Shaft: Ø 48 mm -Construction: B3 -Protection class: IP 21 -Dimensions: 810/600/H450 mm -Weight: 304 kg
Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1430 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 445/260/H310 mm -Weight: 46 kg
Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986
Three-phase motor, electric motor -Power: 4 kW -Speed: 710 rpm -Shaft: Ø 41 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 580/390/H300 mm -Weight: 92 kg
Used brick production line Make OMAG with Teka mixing plant approx. 20 shapes approx. 3,000 pieces of production boards 1400x950mm Used concrete block production plant / pavers production plant Manufacturer: OMAG Teka mixers about 20 moulds about 3000 production boards 1400x950mm
Key data: 6000 , 4100 , 800
Gantry/Bridge Mill Make: Okuma Model: MCR-A5CII Year: 2015 Machine Location: Upon Request Additional Specifications Available Upon Request Travels: X: 263.78″ (Table Front/Back) Y: 161.42″ (Spindlehead Horizontal) Z: 31.50″ (Ram Vertical) W: 47.24″ (Crossrail Vertical) Effective Width Between Columns: 143.70″ Table to Spindle Nose: 0″ to 70.87″ Table: 118.1″ x 255.9″ (3000 mm x 6500 mm) Max. Load: 81,400lbs T-Slots: 24H7 Width x 15# Spindle: 30 to 6,000 30 to 10,000 7/24 Taper No. 50 ATC Equipped With Accessories: -Main motor and standard electricals: 30 to 4,000 min-1 -Spindle cooler: Oil controller -Thermo-Friendly specs: TAS-S, TAS-T -Synchronized W axis NC (NC crossrail): Absoscale detection (W axis) -Auto Tool changer: 50 tools -ATC air blower and spindle air curtain: Air blower (blast) -Seesaw pendant operation panel: Vertical travel ...
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
Key data: 3020 mm, 6 mm, 750 mm
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
Reflection light barrier, light barrier, reflection light scanner -Number: 1x button available -Price: per piece -Weight: 0.06 kg
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
Key data: 100 t, 3440 mm, 3550 mm
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
Key data: 300 mm, 450 mm
Control OKUMA ... OSP-P300LA-e Turning diameter ... 300mm Rotation length... 450mm Inclined bed Spindle bore ... 68mm Driven tools 12 Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Bar feeder Spindle speed ... 38-3800 rpm The machine is in good condition, possible to test under electricity.
maximum number of results exceeded
please refine your search
