ex cell o used for sale

Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg

electric motor, three-phase motor -shaft output on both sides -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Design: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg

Tool setting device, tool presetting device, cutter setting device -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the cutters: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

sheet width: 1570 mm plate thickness: 10 mm pre-bending: 8 total power requirement: 7 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5 x 1,5 x 1,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control, control panel, machining center -Removed from a: CNC lathe, manufacturer: Okuma, type: LB15 -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 115.163 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M

colour units: 1 0 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.285 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 100.524 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3854 Angetribende Tool Manufacturer: Benz , Type: 114EA04941E6 Machine NO.: 9, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Number: 55x Profibus plugs available -Price: per piece -Weight: 0.04 kg/piece

Slicer IFE 2 x 5 m 1 Deck Version Screen lining, wire cross-tensioned Very good condition, few operating hours from a pilot plant

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 6 l/min -Drive: 0.6 kW 1380 rpm -Dimensions: 410/250/H340 mm -Weight: 22 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 45 mm -Assembled tool: Ø 75 x 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 6 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 31 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg

CNC lathe LB 3000 EX II Manufacturer: Okuma Corporation Year: 2017 Control OKUMA ... OSP-P300LA Turning diameter... 580mm Rotation length ... 950mm Inclined bed Axis Y... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed... 0-5000/min. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under electricity.

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120-25 -Stroke: max. 1310 mm -pneumatic: operated -p max.: 8 bar -Dimensions: 90/90/H1660 mm -Weight: 12 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 63 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Total length: 250 mm -Total length extended: 313 mm -Dimensions: 53/53/H250 mm -Weight: 1 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 430 mm -Total length extended: 590 mm -Number: 4x available -Price: per piece -Dimensions: 95/95/H430 mm -Weight: 4.9 kg

Taper clamping bushes, clamping bush -Type: 1615 - 25 - Bore: 25mm -Dimensions: Ø 57/38 mm -Number: 2 available -Price per piece -Minimum purchase: complete -Weight: 0.41kg

heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

electric motor, three-phase motor -Power: 0.75 kW -Speed: 910 rpm -Shaft diameter: 24 mm -Design: B3 -Protection rating: -Dimensions: 365/255/H215 mm -Weight: 33 kg

impressions: 0 Mio. max. printing speed sheets: 1800 /h max. paper size: 30 x 45 cm max. speed: 1800 in A4 /h max. speed: 900 in A3 /h serial no.: 280000960 Dimensions (L/W/H): 180/105/170 cm weight: 450 kg digital printing system for colour prints The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1420 rpm -Shaft diameter: 22 mm -Construction: B3 -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 370/260/H220 mm -Weight: 34 kg

Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg

Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg

Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Dimensions: 360/140/H200 mm -Weight: 11.8 kg

Gear motor, electric motor, electric gear motor -Speed: 80 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 33 -Dimensions: 420/250/H200 mm -Weight: 18.5 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outside mount: MK8 (Ø80 mm to Ø75 mm) -Number: 10x recordings available -2x holder: inside tool MK6 -6x holder: inside tool MK5 -Price: per piece

Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 420/180/H160 mm -Weight: 16 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Drive: 7.5 kW 1440 rpm -Dimensions: 360/310/H660 mm -Weight: 86 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 325/210/H195 mm -Weight: 13 kg

Gear motor, electric motor -Speed: 118 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 400/200/H200 mm -Weight: 12.5 kg

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 1440 rpm -Shaft: Ø 32 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 480/355/H280 mm -Weight: 78 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 33 -Brake: 250 V -Dimensions: 450/300/H250 mm -Weight: 53 kg

Key data: 500 mm, 400 mm, 300 mm

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated -Power: 0.77 - 23 kW -Speed: 100 - 3000 rpm -Shaft: Ø 48 mm -Construction: B3 -Protection class: IP 21 -Dimensions: 810/600/H450 mm -Weight: 304 kg

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 175.887 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.