ex cell o used for sale

Rack oven Miwe Rollin eplus RI 1.0610 TXXL 6 pieces - Rotary oven Baking cabinet Miwe Rollin - for 60x100cm sheets - with 2 rack trolleys - with exhaust hood - with gas burner - with ramp - 6 pieces available in stock

Key data: 17 , 22 , 400

Execution: Aggregate type: transportable Execution: PTO generator Technical data engine: Engine manufacturer: Tractor Power: min. 32 KW Technical data generator: Generator manufacturer: WA Emergency Power Technology Generator type: WA-ZB 22/4 ISO Gene. No.: 1713564 Generator power: 22 KVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Hand start Switch: Generator switch 4 poles Delivery: Built Dimensions of the PTO generator: Width approx. mm: 800 Height approx. mm: 915 Length approx. mm: 1.135 Weight approx. KG: 208 Condition: New Year of construction: 2023 Delivery period: Instant Verl Hours: 1 Location: Verl - Germany Scope of delivery: PTO generator 22 kVA  ...

- electric stone plate oven for 60x40cm trays - 5 tiers each 60/40cm - Top and bottom heat can be controlled separately -digital control - with exhaust hood - movable on castors - Floor height 14cm Dimensions: Width: 90cm Depth: 95cm without hood Height: 210cm

Output throttle SEW HD 001 Item number 813 3255 PVmax 15 W Cable cross-section 1.5 16 mm2

Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT

Deck oven Wachtel Piccolo I-5 DMS 3 Master EM 100 glass - 5 floors each 80x60 - each floor with separate control - Top and bottom heat can be controlled separately - each floor with a separate steam box - Floor entrance height: 14cm - with proofing cabinet - with exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 12 / 2014 - Electrical connected load: 23.7 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Doosan DNM 750 II Machining center - vertical - new in 2016 - control system: FANUC

The AutoDoor AD100 is a powerful, electrically operated door opener for CNC machines with a stroke of 1000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

The AutoDoor AD150 is a powerful, electrically operated door opener for CNC machines with a stroke of 1500 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

The AutoDoor AD200 is a powerful, electrically operated door opener for CNC machines with a stroke of 2000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD200 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

Used deck oven HEIN, type: Universal -in bakery condition- - Deck oven with 4 shelves - 12m² baking surface - Analogue control - Extractor hood with fan - Condition: good, technically tested The oven is in good bakery condition and is ready for immediate use.

brand new - with a capacity of 10,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - zinc yellow / RAL shade 1018 (see sample photo). (Other RA ...

brand new - with a capacity of 50,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - white / RAL-9016 shade (sample photo). (Other RAL co ...

The Digiline Label Offline system makes it possible to pre-produce and serialize (pharmaceutical) labels quickly, abrasion-resistant and process-safe. In this way, the serialization process is decoupled from the dispensing process in terms of time and space. Machine incl. PLC OMRON. Output: 60 m/Min.

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Key data: 64 , 80 , 400

Execution: Aggregate type: transportable Execution: PTO generator Technical data engine: Engine manufacturer: Tractor Technical data generator: Generator manufacturer: Endress Generator type: EZG 80 / 4 IT / TN-S Generator power: 80 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Hand start Switch: Generator switch 4 poles Delivery: Built Dimensions of the PTO generator: Width approx. mm: 740 Height approx. mm: 1.007 Length approx. mm: 1.192 Weight approx. KG: 500 Stock number: 1372 Condition: New Year of construction: 2023 Delivery period: Instant Verl Hours: 1 Location: Verl - Germany Scope of delivery: PTO generator 80 kVA – Brushless with electronic voltage reg ...

Rofco B40 bread oven with mobile stand Recently tested and runs/ bakes perfectly. Key Features oven: 3 stone baking decks for authentic artisan bread baking Holds up to 12 loaves (approx. 850g each) per batch Powerful 2.7kW heating element with thermostatic control Compact and efficient – ideal for small-scale baking 220-240V UK plug – works from standard mains socket Condition: Very lightly used and well maintained Clean and fully functional Some cosmetic signs of use, but nothing that affects performance Recently tested – heats quickly and bakes evenly Included: Rofco B40 oven Mobile Rofco B40 oven stand Original manual

used rack ovens Miwe Rollin e + RI 1.0610-TXXL from year 2020, 2019 and 2017 immediately available in stock for sale. Two pieces are from 2020, one piece from 2019 and one from 2017. The stoves are equipped with oil burners. -Miwe Rollin e+ -Type: RI 1.0610-TXXL -Sheet size 58x98cm -Fuel: Fuel oil -with exhaust hood including fan -with ramp -Door hinge on the right -with Miwe TC control -400/230 V 3/N/PE

Holtec parcel cross-cut saw Type: VARIOCUT SHK Year of Make: 1989 Parcel cross-cut saw with movable parcel roller conveyor Positioning control with length input with measuring point Stationary cross-cut unit Cutting width 1300 mm Package height 1200 mm Highest cutting accuracy thanks to saw set guided on both sides Input roller conveyor 5400 mm long Forward / return 2 speeds With 12 wheels Output roller conveyor 5000 mm long Forward / return 2 speeds With 21 wheels Electrical positioning control with length measuring point by means of measuring trolley Width of roller conveyors 1200 mm both roller tables driven Connected load 11 kW / 21.5 A Ready for immediate use and immediately available Dimensions 10700 mm x 2700 mm x H 3400 mm

-Rotary oven Baking cabinet Miwe Rollin -for 60x80cm sheets -with exhaust hood -with gas burner / oil burner -Nominal consumption 2.6 kW -Nominal heat load. 85 kW -3N- PE- AC 400V 50Hz -with ramp -Year of construction: 2007 -External dimensions approx. 153x160cm and 282cm high

Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.

A total of 4 pieces of overseas containers 20 feet good general condition Weight approx. 2500 kg each without content various versions (see pictures) Net price from 3.000 € / piece

Farbwalze / /roller for offset printing machines Ryobi 520 / 522 / 524 HX / HXX / GX Art.: PS3624 Ersatzteil Nr. / parts No.RG405409 (552252270) Dimensions: 45.5 x 24.0 / 515.0 / 607.0 mm. not original Portugal

Feuchtauftragswalze / water form roller for offset printing machines Ryobi 520 / 522 / 524 HX / HXX / GX Art.: PS3625 Ersatzteil Nr. / parts No. 6520 53 690 Dimensions: 50.5 (50.3) x 30.0 / 511.0 / 615.0 mm. not original Portugal

Polin Forno Wind4060 Oven Serial: 1104034 2011, stainless, electric oven, 10 trays with cooling rack underneath, adjustable temp and timer controls, 3Ph

Rotary lever kneader, Fabr. Imperator - Alkogel

The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: blue Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | pcs.: 0,785 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pl ...

The scope of delivery includes: 112x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: blue Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | pcs.: 0,785 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the p ...

The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: red Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | Pcs.: 0.790 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pla ...

The scope of delivery includes: 112x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: red Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | Pcs.: 0.790 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pl ...

Gebrauchter Backofen MATADOR. Bäckereiofen im Bäckereizustand. Preis auf Anfrage.

NDT lathe - Böhringer Type VDF 400 Spindle 600-440 mm maximum length 2000mm Tool magazine with 12 tools

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1200 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1060 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...