134,294 used machines on RESALE, but how to find them? Machine Search
Description Item # 8975 – CANDY DIE WASHER Manufactured by EXECUTIVE For Candy Moulds, Chain & Rotary Stainless Steel Type 42100 400Volts, 50Hz
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Expert Eda450 Size of table plate: 450 mm weight of the machine ca.: 380 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...
table-size: . mm workpiece height: . mm three-axis-real value indicator: . 0 The technical specifications provided are based on information from the manufacturer or operator and are therefore non-binding for us. We reserve the right of prior sale, our General Terms and Conditions of Business and Sale apply exclusively. About Us Over 400 machines in our own inventory Over 15,000 m² of warehouse space, crane capacity: 70 t Over 10,000 accessory items for your workshop If you are looking to sell machinery, production lines, or your entire business, please do not hesitate to contact us. You can find additional listings on our website. Inspections are available by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
blower power: 19 kW motor: . bucket: Diesel . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm ram surface: 600x300 mm table surface area: 1000x700 mm feed - rapid adjustment: total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Serial No.20279 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cr ...
The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
high-speed CNC machining center Type: HSC 300/3 Manufacturer: Exeron Year: 2019 Control: Heidenhain iTNC 640 Spindle hours: 9500 X: 525 mm Y: 340 mm Z: 355 mm Max spindle speed: 42000 rpm Max table load: 500 kg Clamping table size: 400 x 470 mm HVC140 HSK-E40 milling spindle – S1/S6 40% milling power: 10 kW/13 kW. Ceramic ball bearings with minimal oil and air lubrication. Tool magazine with 16 positions for HSK-E40 tools, with a diameter of up to 16 mm and a maximum length of 75 mm. Blum laser tool measurement, located on the left side, including a tool damage control system. Rotating tools with a diameter of 0.2 to 16 mm are measured directly in the machine working area. The minimum tool length is 45 mm. Graphite extraction system including preparation of the machine for extraction. Air flow rate approx. 1,400 m³/h. Motor power 2.2 kW, noise level approx. 73 dB(A) ...
Used Used Filler Cobert Exacta Isobaric: Year: 2014 Condition: As Is Used Filler Cobert Exacta Isobaric: Completely overhauled with update in 2014 Fixed tank 20 valves with pre-evacuation degassing Vacuum pump Pneumatic bottle lifting pistons with air recovery External valves washing device Machine frame painted and partially covered in stainless steel Direction: clockwise Variable production speed via inverter Production 2,300 bottles per hour of 0.750 Safety protections Code: T 205 More details: https://bottlingscout.com
Used Used labeller Kosme Extra Fix 9T S2 E3 S1 adh: Year: 1999 Condition: As Is Used labeller Kosme Extra Fix 9T S2 E3 S1 adh: Model: Extra Fix 9T S2 E3 S1 ADH Year: 1999 Speed: 8.000 BPH Direction: Counterclockwise Manual head adjustment Number of heads: 9 Mechanical cam plate number of stations: 4 adhesive (one is SYSMEC of 2010) 1 cold glue for back label Number of labels that can be applied at the same time: 4 Applicable label types: ? Front ? back ? Neck label / wrap-around neck ? State Seal I Additional ironing on conveyor Measurements dimensions of machinery: 3000 mm x 3000 mm x 2000 mm Safety protections Code: EA 654 More details: https://bottlingscout.com
Used Used Labeller Kosme Extra Fix 4.200 bph: Year: 2010 Condition: As Is Used Labeller Kosme Extra Fix 4.200 bph Model: Extra Fix 504/6 sc2 e3 Year: 2010 Speed: 4.200 BPH Direction: Clockwise Electric head adjustment 6 plates mechanical cam 2 stations Type of station labeling: cold glue Number of Applicable Labels: 3 Additional bottle outfeed ironing Supported bottle diameter measurements: ? 75 cl: 79,5 ? 1,5 mm ? 33 cl steinie: 69 ? 1,5 mm ? 33 cl long neck: 60 ? 1,5 mm Measurements-overall dimensions of machinery: 3700 mm x 2250 mm x 2200 mm Safety protections Code: EA 663 More details: https://bottlingscout.com
Used Used labeller Kosme Extra Adhesive 504 6t s2 e2: Year: 2001 Condition: As Is Used labeller KOSME Year: 2001 Speed: 4.500 Bph Model: EXTRA ADHESIVE 504 6T S2 E2 Direction: Clockwise Type of label: adhesive Number of heads: 6 Number of adhesive stations: 3 Type of application: Front back Band DOCG Cam: mechanical Lot marker on two stations Bottles formats: 750/borgognotta/magnum Safety protections Code: EA 570 More details: https://bottlingscout.com
Specification Injection Moulding Machine Demag Extra 35-80 General data Clamping force: 35 t Year of Make: 2007 Control: NC4 / MC4 Clamping unit Size of the clamping plates: 390 x 390 mm Lights spar spacing: 280 x 280 mm Ejector force: 26 kN Ejector travel: 100 mm Injection unit Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Spray volume: 42 cc Injection weight in hp: 37 g L/D Screw Ratio: 20 Machine weight: approx. 2,200 kg Equipment: hydraulic core pull, pneumatic valve Location: Aachen, Germany
table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale ...
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 949 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions ...
table length: 2000 mm table width: 1000 mm table height (lateral area): 200 mm weight: 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with ...
table length: 3000 mm table width: 1500 mm table height (lateral area): 200 mm weight: 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version wit ...
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 981 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x ...
pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90.0 mm/sec work speed: 7.5 mm/sec return speed: 80.0 mm/sec work stroke: 160 mm dayligth: 395 mm table height: 900 mm back stop - adjustable: max. 800 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11.0 kW weight: 7524 kg range L-W-H: 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation Radius programming Graphic tool and product library Collision mo ...
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 1069 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 ...
pressure: 40 t distance between columns: 495 mm stroke: 150 mm distance table/ram, max. stroke up, adjustment up: 300 mm table surface area: 490 x 400 mm hole in the table: 50 mm table height over floor: 950 mm column travel -side: 155 mm ram surface: 150 mm feed down: 480 mm/sec feed up: 480 mm/sec working feed: 20 mm/sec oil volume: 115 l power capacity: 7,5 kW weight: 2,2 t dimensions of the machine ca.: 1,35 x 1,00 x 2,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1075 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 543 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height (lateral area): 100 mm weight: 753 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale ...
Number of motors: 2 Stück 0: 3000 mm Control: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm -------------------------------------- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15 touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB ...
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 913 kg 280030.XD7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 3.0 mm ST pre-bending capacity: 3.0 mm ST upper roll diameter: 170 mm lower roll diameter: 170 mm side roll diameter: 180 mm Control: konv. 0: 380 V total power requirement: 3.0 KW weight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Including digital position display - Manual bottom roll adjustment Via hand crank - Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forkl ...
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80.0 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 250 mm ram stroke speed: 90.0 mm/sec work speed: 7.5 mm/min return speed: 60.0 mm/sec work stroke: 160 mm dayligth: 380 mm table height: 900 mm oil volume: 150 ltr. voltage: 400 Volt weight: 5227 kg range L-W-H: 3750 x 1950 x 2400 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FBR Export Long Grinder Table length 2900 mm. Table width 800 mm. Vertical stroke 550 mm. Tape length max. 7800 mm. Belt width 150 mm. Belt feed power 2.2/3kw 0.25kw Table Lifting Motor Overall dimensions 4400 x 1370 x 1400 mm.
LNS HYDROBAR EXPRESS 326 S2 ist ein Stangenlademagazin, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Stangendurchmesser rund von 3 mm bis 26 mm; Stangenlänge max. 3200 mm; Reststücklänge max. 400 mm; Beladekapazität 270 mm. Technische Hauptdaten: Anschluss 50 Hz, 3x 380 V; Abmessungen L 4400 mm x B 600 mm x H 1300 mm. Ermöglicht enge Toleranzen; typische Anwendungsbereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr
Hohner Exact Plus 2-Head Stitcher - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Hohner Exact Plus 2-Head Stitcher Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Hohner Exact Plus 2-Head Stitcher Price: 8750 EUR Download PDF Hohner Exact Plus 2-Head Stitcher Machine in perfect condition, ready for production. Semi-automatic booklet stitching machine equipped with two Universal 43/6 S stitching heads and a station for manual loading and automatic unloading of booklets onto the conveyor belt. Head spacing adjustment. Maximum booklet size: 420 x 360 mm Min. boo ...
This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details.
Size: 430 x 340 mm Equipments: 4 Hohner narrow stitching heads Universal 52/8 Stapling performance: Maximum of 206 staples per minute and stapling head. Production Speed: Capable of reaching up to 4,000 cycles per hour. Format Range: Handles booklet formats from a minimum of 100 x 80 mm up to a maximum of 430 x 340 mm (spine x head/foot) Expandability: The manual hand-feeding station
Gantry-type, 3-axis CNC machining centre Working area (type 2132): approx. 3300 x 2100 mm Vacuum table with multiple switchable zones Input: AES lifting table for automatic sheet loading Output: conveyor belt with label printer (labels are printed and applied manually) Main spindle: HSD ES929, HSK-F63 mount, 7.5 kW (9 kW), speed up to 24,000 rpm, 800 Hz, 380 V Main spindle overhauled in 2023 Drilling unit with 16 spindles: 6 vertical spindles in X, 4 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Tool changer with 12 positions Vacuum: Becker vacuum pumps, system approx. 500 m?/h Control: OSAI control system with AES ProcessController, operation via console with touchscreen and keyboard Operating hours: approx. 2,100 h (machine life), main spindle overhauled at approx. 1,360 h
Hydraulic press with a pressing force of 5,000 kN or 500 t. Manufacturer: Maschinenfabrik EXNER GmbH & Co. KG Type: EXSBRD 500ET Machine No.: 10461 Year of manufacture: 2001 Max. stroke length: 1,300 mm Max. opening: 1,800 mm Min. opening: 500 mm Table size: 2,550 × 2,000 mm Frame passage: 2,570 mm Tool dimensions: 2,200 × 1,800 mm Max. tool weight: 25,000 kg Working speed: 26 / 50 mm/s Rapid traverse speed: 400 mm/s Overrun distance: 97 mm Overrun time: 158 ms Safety distance: 252 mm Drive power: 159 kW Oil capacity: approx. 2,800 liters
table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 300 mm bore: 28 mm weight: 1670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...
Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg
Nardi Compressori Extreme 4D 90 Lt. – Dental/Medical Compressor with Dryer (YOC 09/2016) Professional oil-free piston compressor of the Extreme 4D series (Dental/Medical version) from Nardi Compressori, Italy. Serial number 225918, year of construction September 2016.Technical data (according to nameplate): • Model: Extreme 4D 90lt. • Power: 2.5 hp / approx. 1.84 kW • Voltage: 230 V / 50 Hz • Current consumption: 13.5 A • Speed: 1,400 rpm (slow running = quiet & durable) • Suction capacity: 480 L/min • Operating pressure: 8 bar • Tank volume: 90 litres (horizontal) • Sound pressure level: Lpt 77 dB / Lw 91 dBA • With integrated adsorption dryer (typical for the 4D series) → delivers dry, oil-free and clean compressed air • Internal epoxy coated tank (corrosion protection) • Made in Italy The compressor is fully functional and ready for ...
table length: 1000 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 400 kg Special item - Material thickness varies, can only be clamped with bolts 280536 or 280532. Not compatible with quick-release bolts Features: - 4 legs - Standard configuration 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panels made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 28 mm - Holes arranged in a diagonal grid on the surface - Corners, edges, and holes are rounded - Side panel height: 200 mm - Holes in the side panel arranged in a diagonal grid - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise setups The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis EXPERT SYSTEMTECHNIK cutExpert variojet was manufactured in 2016. It features a maximum material thickness capacity of 100 mm, allowing for versatile cutting applications. The machine includes an Uhde HPS 4022 high-pressure pump, designed for a discharge capacity of 2.3 l/min and a pressure of 4000 bar, enhancing its cutting efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the EXPERT SYSTEMTECHNIK cutExpert variojet machine we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
