ex cell o used for sale

1,1 Kw. 400 v. 50 Hz. With suction arm 3 m, hose type, internal joints. 3 units available.

PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

Key data: 20 mm, 150 , 2150 U/min

with PE screw, Capacity approx. 350 kg/h complete with motor, gearbox and Heating tapes Good condition, immediately available

For sale is a compensator for a Mitsubishi S12R Condition: new (traces of storage available) Part Number: 47920-00700

The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...

TO WHOM IT MAY CONCERN, GDY WE VE USED COMPLETE EXHAUST GAS TURBOCHARGER ABB TPL 77-B12 AT OUR STOCK WE DISMANTLED THIS TURBO CHARGER FROM MAN 6L 50 MC-C ENGINE PLS FIND SPEC AT BELOW

For sale are new exhaust gas outlets for the turbocharger Condition: new (traces of storage available) Part Number: 37732 05500 We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Type : UMA90 Année : 1996 – Révisée 2014 1 tète – 1 poste Diamètre de vis : 120 mm Tète 18 litres – 16 kg Capacité production : 450 kg/h Control Paraison : 100 points Passage entre colonne : H1200 x V2100 mm Course d’ouverture maxi : 1800 mm Force de fermeture : 90T Epaisseur moule mini : 405 mm Possible fût 100l

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

A Lenhard extruder for butyl rubber is available. Application: insulating glass production, material: thermoplastic butyl based on polyisobutylene, max. operating temperature: 140°C, max. butyl pressure: 140bar, max. hydraulic pressure: 150bar. An on-site inspection is possible.

Extendable boiler for Kemper SPA 75 Product description Manufacturer: Kemper Type: SPA 75 Condition: used, baker's condition The kettle is integrated on a trolley The trolley is easy to drive and rotate The kettle can be rotated in all directions on the trolley Material trolley: metal Material kettle: stainless steel For max. 120 kg dough / 75 kg flour Inner à ̃ of the kettle: 76 cm, approx. 42 cm deep Outer shell of the cauldron: 81 cm Material thickness: approx. 5 cm For details see pictures.

Counter tray / Exhibit tray 600x400x10 mm  NEW! ( 10 pieces )Counter tray / Hinged plate NEWAus aluminium 0.9 mm thickness silver with 4 edgesOuter dimensions: W.: 600 mm, D.: 400 mm,  H.: 10 mm Details see picture

serial number: 6023449 Four wheel steering: ja weight: ca. 7 t : Video vorhanden : ja : 50 % lifting capacity: 2,5 To. volumn: Fassungsvolumen 0,7 cbm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haendle Extruder type PZG60b/50 with doubleshaft mixer MDVG920a, 29 cbm/h, 30 bar

max. plate format 1130 x 950 mm 64 Laser Diodes 405nm Resolution 2400 dpi Platecounter 31260 Laser on time 940 hours only well-maintained available immediately delivery worldwide, Price on request

Nederman Dust Collector / Silo Dust Collector with Control and Compressed Air Treatment Manufacturer: Nederman Type: DFC-08M Item number: 5512680 Year of manufacture: 2023 Manufacturer of pressure vessels: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial Number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure Test Date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Control: Nederman DFC-08M Controller Compressed air treatment: Camozzi MC202-D00 Max. inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB Control/Connector Housing Design: Dedusting system for silo applications with integrated filter unit and fan Accessories / Scope of delivery ...

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Ex-protected rotary valve, ZRD 200 1-5-GC, Coperion, new -40% Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - Explosion-proof rotary valve for granules, model ZRD 200 1-5-GC, Coperion, new -40%, - Explosion-proof design, Up to max. 60°C, - Powder and granules, aluminium dust containing steel and stainless steel, - designed for a bulk density of 350 kg/m³, max. 450 kg/m³ - Without drive and bearing air purge (quote available), - Housing material: grey cast iron, rotary valve: steel, - Inlet and outlet: DN200, - Please feel free to ask us for the specifications, - Viewings are available at any time, 6 months warranty We give you 6 months warranty for these goods  ...

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm -Connection output: 365 x 310 mm -Dimensions: 1300/740/H820 mm -Weight: 153 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermo-expansion valve, thermostatic expansion valve -Manufacturer: Danfoss, thermostatic expansion valve -Type: TES2 R404A R507 -Price: per piece -Number: 1 pieces (Art.No. 068Z3437) -Dimensions package: 90/80/H70 mm -Weight: 0.3 kg/piece

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 420 mm -Height: 1010 mm -Depth: 1370 mm -Intermediate mounting dimension: 275 mm -Hole diameter: Ø 60 mm -Laceration teeth -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 360 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 500 mm -Height: 900 mm -Depth: 1100 mm -Intermediate mounting dimension: 185 mm -Hole diameter: Ø 50 mm -teeth of tearing -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 190 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 1.1 kW -Speed: 2810 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 300 mm -Outlet connection: Ø 290 mm -Impeller: Ø mm -Number: 2 fans available -Price: per piece -Dimensions: 970/770/H660 mm -Weight: 46 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.62 kW -Volume output: approx. 45 m3 / min -Connection air duct: 285 x 140 mm -Number: 2x fans available -Price per piece -Dimensions: 390/340 / H340 mm -Weight: 15 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow rate: m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: very stable -Width: 850 mm -Height: 1060 mm -Depth. 1600 mm -Zeppelin quick change adapter NADO -ripping teeth -Number: 2x excavator buckets available -Price: per piece -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 850/1600/H1060 mm -Own weight: 600 kg

Trusses, trade fair construction, trade fair trusses, lattice masts, partition walls for trade fair stands -Quantity: 4x transport trolleys with partitions and lamps -Equipment: 3x frames, each with 2 pieces lamps size 1500 x 2500 mm -Accessories: see photos -Transport dimensions: 1350/950/H900 mm -Weight: 120kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.0 kW -Speed: 1420 rpm -Volume flow: m³/h -Pressure: Pa -without: housing -Impeller outside: Ø 430 mm -Impeller inside: Ø 270 mm -Sash: 100 x 180 mm -Sheet metal plate diameter: 650 mm -Sheet metal plate bolt circle: 600 mm -Number: 3x fans available -Price: per piece -Dimensions: 400/650/H650 mm -Weight: 52 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.6 kW -Speed: 2800 rpm -Volume flow rate: m³/h -Pressure: Pa -Inlet connection: Ø 150 mm -Output connection: 150 x 110 mm -Impeller: Ø 260 mm -Number: 1x fan available Price: per piece -Dimensions: 450/400/H390 mm -Weight: 19 kg

radial fan, dust extraction blower, fan, extraction, dust blower -for: paint wall, paint booth -Motor: Explosion-proof -Engine power: 5.0 kW -Speed: 1455 rpm -Inlet connection: Ø 430 mm -Outlet connection: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg

radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Nedermans, Dust extraction blower exhaust fan 500725 -Motor: 0.37 kW 3000 rpm -Fan wheel: Ø 290 mm -Connection: Inlet Ø 130 mm -Connection: Output Ø 120 mm -Dimensions: 540/420/H520 mm -Weight: 24 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy-duty, very stable -Width: 1220 mm -Height: 950 mm -Depth: 1380 mm -Photograph: Atlas 1704, dimensions see photos -teeth of tearing -Load hook -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 814 kg

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra axial compensator unused -Type: ABG 01.0450.196.0 -Nominal diameter: DN 450 / Length 406 -Material: Bellows stainless steel -Bolt circle: Ø 550 / 22 mm -Number: 4x dampers available -Price: per piece -Dimensions: Ø 595 x 415 mm -Weight: 40 kg/piece

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra axial compensator unused -Type: ABG 01.0450.196.0 -Nominal diameter: DN 450 / Length 406 -Material: Bellows stainless steel -Bolt circle: Ø 575 / 22 mm -Number: 2x dampers available -Price: per piece -Dimensions: Ø 600 x 415 mm -Weight: 40 kg/piece

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: SB Broneske, compensator unused -Type: SBF25.050 -Nominal diameter: Ø 270 mm / length 235 -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Number: 5x dampers available -Price: per piece -Dimensions: Ø 375 x 230 mm -Weight: 15.3 kg/piece

Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg