ewag ws 11 used for sale

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 110 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Max. Pressure: 0.8 - 10 bar -Dimensions: 160/70/H70 mm -Weight: 1.3 kg

Gratings, gratings, light grids, insert grilles, insert grilles -Dimensions: 1090 x 1110 mm -Total height: 140 mm -Longitudinal struts wall thickness: 2 mm - Gratings: Hot-dip galvanized -Weight: 40kg -Quantity: 1 piece available

Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-C1-SP-110 For MAZAK Mitsubishi We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

electr. Clutch brake, clutch brake combination -Manufacturer: Lenze, clutch-brake combination -Type: Simplatrol 14.113.08.1 = 24 V/15 W/77/40/VDE 0560 -Voltage: 24 V/15 W. -Dimensions: 135/155/235 mm -Weight: 4.5 kg

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 0.25 kW -Voltage: 220 V -Volume flow rate: 25 m³/h -Pressure height: 1500 mm WS -Dimensions: Ø 330 / 425 mm -Weight: 13 kg

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-C1-SPH-110 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 18 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Number: 13x pillows available -Price: per piece -Weight: 0.4 kg/piece

Starter Bosch -Voltage: 24 V -Type plate: 113445 24V E5200 -Tooth: 12 -Price: per piece -Number: 2 pieces -Dimensions: 440/220/H155 mm -Weight: 28 kg/piece

Socket / housing for filling machine VEMAG Vemag article number Vemag 110610020 110.610.020 L = 37 cm 110-610-020 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Gear motor, offset gear motor, electric motor, three-phase motor, electric gear motor -Speed: 104 rpm -Power: 4 kW -Motor type: SK 112M/4 -Construction: B3/B5 -Shaft: Ø 30 x 70 mm -Protection class: IP 55 -Dimensions: 550/285/H260 mm -Weight: 49 kg

Motor centering flange, motor flange, pump flange, motor centering bell, clutch bell, bellhousing for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -Large recess: Ø 115 mm -Dimensions: Ø 180/H41 mm -Weight: 0.5 kg

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension Telescopic slides, extension slides, heavy-duty extension -Retracted length: 600 mm -Extended length: 1100 mm -Width: 14 mm / Height: 24 mm -Price: per pair (left right) -Number: 4 pairs available -Weight: 1.5 kg/piece

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm be ...

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic stamps, air stamps, compact cylinders, short-stroke cylinders -Stroke: 80 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 7 pieces -Dimensions: 220/30/H30 mm -Weight: 0.3 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 24 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 0.5 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 198/110 mm -Height: 20 mm -Hole circle: Ø 150/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 148x pillows available -Price: per piece -Minimum warning: 3 pieces -Weight: 0.5 kg/piece

Ref. -No.: 10304 Manufacturer: SPINNER Year of construction: 2007 Type of control: CNC Control: Siemens 840 D with SHOP Mill Storage location: Halberstadt Country of origin: Germany X-Travel: 1100 mm Y-Travel: 610 mm Z-Travel: 610 mm B-Axis: 0.001 prepared for 4 th axis ° Main spindle drive power: 25 kW Main spindle speed range: 6000 RPM Table surface: 1200 x 600 mm Table Load: 1000 kg Tool Taper: SK 50 Numbers Of Tools In Magazin: 24 axes: 4 Rapid Traverse X-Axis: 18 m / min Rapid Travel Y-Axis: 18 m / min Rapid Traverse Z-Axis: 15 m / min Main Drive: 25 kW Weight Of The Machine Ca.: 8 t Further information: - additional 4 axis (Dividing head)

Ref. -No.: 10022 Manufacturer: UNION Year of construction: 2001 Type of control: CNC Control: Heidenhain-Steuerung TNC 310 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 2000 mm Machine length: 6950 mm Machine width: 4685 mm Machine Height: 3885 mm Table Height: 1050 mm Spindle Diameter: 110 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mm Faceplate speed: 5,6 - 224 RPM Spindle Speed: 5,6 - 1120 RPM Metric thread feeds: 1,25 - 56 mm Drive Capacity - Spindle Motor: 40 kW Weight Of The Machine Ca.: 25 t Bore Depth: W 800 mm Further information: with facing slide 13 inch thread feeds 1 1/8 - 28 Gg / 1 “ YOM: 1990/ Retrofit: 2001

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/116 mm -Height: 58 mm -Number: 10x pillows available -Price: per piece -Weight: 3.4 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/114 mm -Height: 32 mm -Number: 4x pillows available -Price: per piece -Weight: 2.1 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 155/115 mm -Height: 53 mm -Delivery of: steel/stainless steel cover plates possible -Number: 29x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.3 kg/piece

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 685 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 360/230/H250 mm -Weight: 36 kg

Vacum dough divider

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: 167-05 5000-1 -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Max. Pressure: 16 bar -Stroke: 1150 mm -Dimensions: 75/75/1340 mm -Weight: 9.6 kg

Grinding wheels, grinding bodies -Outer diameter: 555mm -Width: 110mm -Inner diameter: 203mm -T1707801 -Weight: 50.5kg

live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -both sides: different height adjustable -Steel frame: solid -Dimensions: 1100/510/H780 mm -Weight: 64 kg

Qty. 1 Second-hand filling monoblock Mfc.: STORK Bepak B.V. Type: VS 60/110/12 LW – 0.25, 0.5, 0.7 L Built: 1992 Carousel type 60 Pourers Equipped with a capping machine - 12 heads Installed power: 13.5 kW Nominal capacity: up to 20,000 bottles/h Working capacity: 12,000 bottles/h for a 0.5 l bottle Two sets of heads for 28x18 and 28x38 caps Two slides Multi-row plate conveyors feeding into and out of the monoblock. Technical assessment: complete device, technically efficient

Three-phase motor, electric motor -Power: 2.2 kW -Voltage: 220/380 V -Speed: 915 rpm -Shaft: Ø 34/28 mm -Length shaft: 120/60 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 495/240/H275 mm -Weight: 28 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 110 mm -Drawing: in the photos -Dimensions: 180/95/145 mm -Weight: 4.2 kg

Syspal fully enclose tote bin tipper Fully working 16a 3 phase plug 2m tip height All failsafes

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

Bosch alternator -Type: 1100827 22A 76E 3 -Voltage: 12 V -from forklift: Still type EFG 1.0/5002 -Dimensions: 187/165/H140 mm -Weight: 4.6 kg

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Key data: 420 mm, 250 mm, 350 mm

with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!

Starter Delko-Remy -Voltage: 12 V -Type: 1108 2 7A 14 -from forklift: Still EFG 1.0/5002 -Teeth: 10 -Dimensions: 305/180/120 mm -Weight: 11.5 kg

Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 195 mm -Length: 1108 mm -Height: 40 mm -Groove width: 12 mm -Weight: 63 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Coated steel tanks Dimensions : - Depth : 2500 mm - Width : 1600 mm - Total height: 3980 mm (incl. dome) - Ground clearance: 420 mm Equipment : - Partial discharge DN 40 - Residual discharge DN 40 - Rectangular manhole 320 x 420 mm - Level indicator - Dome DN 500 mm - In perfect condition

Seydelmann grinder WD 114, built in 2015, meat grinder completely stainless steel, incl. Unger cutting set, hole plate diameter 114 mm.

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 115 mm -Piston diameter: 50 mm -Number: 6x available -Price: per piece -Dimensions: 400/65/H90 mm -Weight: 2.3 kg/piece

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 705 rpm -Shaft: Ø 32 x 80 mm -Design: B5 -Protection class: IP 44 -Price: per piece -Quantity: 1 available -Dimensions: 460/257/H310 mm -Weight: 50 kg

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -large recess: Ø 115 mm -Quantity: 1 available -Price: per piece -Dimensions: Ø 180/H71 mm -Weight: 0.6 kg

4. Qty. 1 Second-hand Monoblok Mfc.: Stork Bepak BV Type: VS 60/110/12LV Built: 1992 Carousel monoblock 60 pourers 12 closing heads Fill inspector Missing cap Capacity: 20 000 bottles/h Sizes: 250, 500, 700, 750 ml

Key data: 1000 mm, 600 mm, 90 mm

4 pieces of magnetic clamping plates with control unit