ewag ws 11 used for sale

Mercedes Benz special vehicle / fire engine 1124 AF, Technical specifications:, - Dead weight: 7,175 kg, - GVW: 12,000 kg, - Displacement: 5,958 cm3, - Power: 177 kW, - hz. Axle loads: 4400 / 7800 kg, - Support load: 80 kg, - unbraked: 750 kg, - Overrun brake: 1920 kg, - other brake: 14,600 kg

Filler Krones 60 valves KK +SV plastic Available End 26 uwemetzlerdingslebener

Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer: MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...

Only 5 hrs. Traded-in from customer who needs more power., Warranty is still applicable., Used Generator Set.; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320

power capacity: 30/37 kW volt: 380 V ampere: 70/78 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU242X187 MakeAlfa Laval LocationBarneveld CEcheck TypeNX912B-11G Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter275 mm Screw length1260 mm Inletcheck Liquid outletcheck Solids outletcheck Motor15 kW, 380/660 volt, 2940 rpm Max. rotor speed4400 rpm MaterialStainless steel 1.4404 (316L) Information No.5123849 Year of construction2012 Mounted on framecheck Floorspace2,60x0,80 m Total height0,92 m Weight1500 kg Extra SpecificationsMax solids 3,0 kg/dm3, work temperature 0°C-100°C DecantersAlfa LavalCentrifuges > DecantersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

Key data: 110 mm

HBM HWCa-110, new in 1965

Engine Brand: DAF, Condition: USED, Engine Aspiration Type: TURBO , Bore: 130 mm, Stroke: 146 mm, Engine Capacity: 11630 cc, Qty Cylinders: 6 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: goud , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , Starter Voltage: 24 Volt , Rated Power: 170 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/daf-dkt-1160-ag-used/42363 , , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.550 kg, Type number: DKT 1160 AG

Jig grinding machine HAUSER S3-111

Indramat Indramat 093B-0GS-3-C/110-B-0/S001

Indramat MAC090C-0-GD-3-C/110-A-1/S001

Briquette press Compacto 1100 SH with filter house 100 filter Filter length 3 m Filter diameter 15 cm Filter area 142 sqm Air flow rate of approx. 21,000 m3/h Throughput capacity approx. 100 kg/h

HAKO snow blower, PTO drive . rpm.(in driving tr. left dr.), with attachment device quick coupling triangle cat. 0. Manually swivelling ejection chimneys, sliding skids. Clearing width approx. 1.15 m, clearing height approx. 1.20 m. Condition good, apparently unused, with flash rust. Chain drive for left-handed PTO. Other snow blower: Zaugg 55-110, working width 110 cm, PTO drive 1,000 rpm clockwise rotating i.F.; Discharge chute can be swivelled by hand crank, coupling plate with swivel screws. Winter service technology, used parts and more in stock, more on request ! Jodau Machine Trade Municipal, Environmental & Green Maintenance Technology Inh. Joachim Dau 24941 Flensburg, Wieselhof 29

The bran finisher increases the flour yield during the grinding process by separating the flour from the bran. It is used for soft wheat, durum wheat and rye. It has a production capacity of up to 1.8 tons per hour, or 3.6 tons per hour if you use the double machine.

Colour Monitor, Touch Screen, Programs, Chromed Air Table, Light Barriers, Resopal Side Tables With Air, Spare Knive, Books & Manuals

Impressions=0 m, Condition= Very Good , Availability= 2026-01-13, Polar 115 cm Jogger Airtables Transomat unloader

General Manufacturer: Spinner Type: TC800-110-MCY Year of Make: 2009 Control: Siemens 840D SolutionLine Travel: X 360 mm Z 900 mm Y -55/+65 mm Switch-on hours: 22,551 h Working spindle Speed: 3,200 rpm Power: 28/35 kW Torque: 175/875 Nm Tool/movement Tool holder: VDI40 Tool turret: 16-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: C-axis for spindle incl. software option "Transmit" Hydraulic hollow clamping cylinder Electrical interface for connecting rod feeds 840D-SL Software Package "Turning with Shoturn" Tool monitoring 840D-SL 3D Simulation of the Precast Part Tailstock Chip conveyor High Pressure Pump Double filter Mahle Parts catcher V2 TC800 Clamping force control via differential pressure for main spindle

width of the strips: 50.0 mm band length: 940 mm band speed: 3.0 - 22 m/min turning speeds: 1450 U/min tube diameter: 16.0 - 114 mm radius: 180 ° total power requirement: 4.75 kW weight of the machine ca.: 265 kg range L-W-H: 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180 (angle). - Manual work possible without feed - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

11700L Square Vessel - Atmospheric Vertical stainless steel tank 11700L Gross Volume Manufacture: Moeschle Behalterbau GmbH Height Approx 2700mm Width Approx 2500mm Depth Approx 2550mm Double Walled Insulated Stainless Steel Clad sides Cooling Jackets 2" RJT Bottom Outlet Smaple Point 1.5" External Down Pipe Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

2000L Vessel - Atmospheric Vertical stainless steel tank 2000L Gross Volume / 1630L Working Volume Manufacture: Fabdec / 2014 Dished Top & Bottom Insulated Stainless Steel Clad sides Cooling Jacket Bottom Outlet 1.5" RJTF High Level Side Port 1.5" RJTF Top Port (CIP) 1" RJTM Detachable Spray Ball Top Manway Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

11800L Square Vessel - Atmospheric Vertical stainless steel tank 11800L Gross Volume Manufacture: STB Engineering / 2014 Height Approx 2700mm Width Approx 2550mm Depth Approx 2550mm Insulated Stainless Steel Clad sides Cooling Jackets 1.5" RJT Pipework & Fittings Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

turning diameter over bed: 1100 mm turning diameter over slide rest: 740 mm turning length: 6000 mm spindle bore: 110 mm turning speeds: 16-1600 U/min digital readout: faceplate: mm 3-jaw chuck: steady: total power requirement: 22 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed 16 - 1800 (18x) kW 22 Voltage 380V Hz 50 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space,  ...

: 1100 mm : 650 mm : 610 mm : 1200x6000 mm : BBT 40 : 12.000 U/min Motor Capacity: 7,5/11 kW max. table load: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Kundig Premium-2 1100-RE belt sander was manufactured in 2007. Ideal for woodworking, it features a robust design for consistent performance. Consider the opportunity to buy this Kundig Premium-2 1100-RE belt sander. Contact us for more information.

Height 1300 mm Width 800 mm Length 1200 mm Electrical Supply: 400V 50Hz 3N Total power 7.5 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 114 mm Wolf type Angled wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant

Wide belt sander DMC mod. TECHNOSAND TCK-1100 M3 - CE rules - Working width mm. 1100 - 1st unit roller 18.5 kw 90 sh diam. 250 mm. - 2nd unit roller 15 kw 70 sh diam. 250 mm. - 3rd unit roller 11 kw 40 sh diam. 330 mm. - N. 3 independent motors - Touchscreen display - Short pieces device - S/N SA/005623 - Year 2007

x-travel: 1100 mm y-travel: 650 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 2-axes dividing head (4th and 5th axis) electronical hand wheel 24-fold automatic tool changer coolant through spindle device chip screw measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1100 mm Verfahrweg Y / Y-Travel 650 mm Verfahrweg Z / Z-Travel 600 mm Tischgröße / table size 1300x600 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 Eilgang X,Y,Z / rapid feed X,Y,Z 15,15,15 m/min Gewicht der Maschine ca. / weight ca. 7400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Th ...

Manufacturer: Safan Model: CNCL 110-3100 Type of Machine : Press Brake Find more here - / Contact us at -

This 3-axis Droop & Rein FS 110 milling machine was manufactured in 1976. It features a robust Heidenhain TNC 426 control, a main spindle power of approximately 18KW at 1600rpm, and a tool holder of ISA 50 (DIN 2080). The machine includes an electric tool clamp and automatic central lubrication. Ideal for precision milling, the Droop & Rein FS 110 machine we have for sale. A lot of additional accessories are included. Contact us for further details regarding this milling machine.

This 3-axis SMTCL vmc 1100B was manufactured in 2015, featuring a robust 1100mm X-axis, 610mm Y-axis, and 650mm Z-axis. It boasts a spindle speed of 10,000 rpm and a 24-tool magazine. Equipped with a Fanuc 0i control and a table surface of 1300 x 610, consider the opportunity to buy this SMTCL vmc 1100B vertical machining centre. Contact us for more information.

Transnorm Rising falling Incline belt conveyor with arch GF 2900-8100-600-500 RA2464 Technical data: Conveyor length (NL): 11000 mm ( 2900 mm arch + 8100 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 11000 ( 2900 + 8100 ) Nominal / outside width in mm: 600 Belt width in ...

This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine.

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Victor Vcenter A-110 was manufactured in 2009. It features a FANUC 21i-MB CNC, with a working range of X 1100, Y 600, Z 560, and a spindle speed up to 12000 rpm. It includes an ISO 40 tool holder and a 30-tool magazine, complemented by a conveyor and high-pressure system. Consider the opportunity to buy this Victor Vcenter A-110 vertical machining centre. Contact us for more information.

This SEYI SN1-110 was manufactured in 2002. It is a mechanical C-frame crank press with a 110 tons capacity and a stroke of 110 mm. The machine offers an adjustable speed range of 35–65 SPM, a maximum die height of 350 mm, and a main motor of approximately 11 kW (15 HP). Contact us for more information about this machine.

Knoll High Pressure System KF 110/700 Year of Make: 2017 Paper Belt Filter Tank capacity: 600 litres Mas. Pressure: 70bar Little used. Like new

This 5-axis LVD PPEB 110/30 Press Brake was manufactured in 2001. It offers robust performance for precision bending operations. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 110/30 machine we have for sale. Contact us for more information about this machine.

Manufacturer: Fohrenbach Model: Unipos 110 Find more here - / Contact us at -

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1950 kg Total power requirement: 13,5 / 17,5 kW kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This KNUTH BO 110 was manufactured in 2013. A robust boring machine, it features a maximum workpiece diameter of 250 mm and a grinding length of up to 500 mm. The grinding wheel operates at 1670 RPM, with a headstock speed variable from 50 to 500 RPM. It supports a table swivel range of ±9° and a table speed up to 4 m/min. Ideal for precision boring, the KNUTH BO 110 machine we have for sale. Contact us for further details.

LBBC Boilerclave Internal dims: 900mm diam. x 1100mm long Max. working pressure 8.6bar Design Temperature 200deg.C Jacket input power 75KW

This Wood Band Saw was manufactured in 2020. It features a maximum log diameter of 1100 mm and a cutting length up to 10 meters. The main drive is robust at 15 kW, ensuring efficient operation. It includes a double edger, wood excavator, and various operational enhancements such as an electrically adjustable saw head and multiple feed speeds. Ideal for comprehensive woodworking tasks. Contact us for more information about this machine.

Key data: 4 KW

The Nord SK 112M/8-2 BRE 40 TF is a pole-switchable three-phase asynchronous motor from NORD DRIVESYSTEMS. Technical details Motor type: Pole-switchable motor for two fixed speeds. Number of poles: 8/2-pin (low/high speed). Power: Typically approx. 4.0 kW at high speed (reference value for 112M size). Brake (BRE40): Equipped with a spring-applied brake and a braking torque of 40 Nm. Motor Protection (TF): Integrated thermistor (PTS) to monitor winding temperature. Additional options (WUTFZ): Customer-specific winding or fan modifications (often for operation on frequency converters or special cooling types). UNUSED

This 3-axis BUSELLATO Easy Jet 7.10 D AH/119579 was manufactured in 2016. A CNC Wood Machining Centre featuring a working area of 3200 mm by 1300 mm, it boasts a spindle power of 12 kW and speeds up to 24,000 RPM. Equipped with an automatic tool changer supporting 8-16 positions and a robust vacuum system for secure clamping. Ideal for precision woodworking, the BUSELLATO Easy Jet 7.10 D machine we have for sale. Contact us for further details regarding this CNC Wood Machining Centre.

This Kundig Premium 2 1100-RE belt sander was manufactured in 2007. It features a working width of 1100 mm and can handle workpiece heights from 3 to 200 mm. The machine includes a rubber roller, segmented pad with belt cleaning, and a vacuum conveyor belt. It operates at 400 V and 57.5 A, with a power of 28.4 kW. Contact us for more information about this machine.

General SKU335W850 MakeVerwo Wegmann TypeSBL-112-S-FA-6-T No.7056 Year of construction2016 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Specified Features - Screen filter MaterialHalar coating, Stainless steel 1.4435 (316L) Sieve filtercheck Sieve sizesDia. 200x900 mm InletDN70 OutletDN70 Capacity33 l. Information Floorspace0,25x0,25 m Total height1,25 m Weight50 kg CEcheck Extra SpecificationsFilter size, dia. 160x700 mm, perforation size 20x4 mm :Screen filtersVerwo WegmannFilters > Screen filtersBrand > Verwo Wegmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This SMCTL DMC SD 30 RCS 110 belt sander was manufactured in 2018. It features a working width of 1100 mm, handles workpiece thickness from 4 to 170 mm, and operates with a main motor power of 15 kW. The machine includes a 10 touchscreen control panel and requires an air pressure of 6 bar. Consider the opportunity to buy this SMCTL DMC SD 30 RCS 110 belt sander. Contact us for more information about this machine.