128,238 used machines on RESALE, but how to find them? Machine Search
APV Screw Compressor 3 Screw compressors Control Panel, Fridge watch 2100 system DX system Last run on 404a Last used to run a Spiral Freezer 33 Kw each, Total = 99Kw Max Model: HS2116 Built 1994 Complete with Searle Condensor (4 fan) Model: MDR 110-12 Serial: 961246 Physical dims: 5.1m x 1.16m x 0.7m (h)
Punching force: 110t, max. punching capacity: 40mm/20mm, throat depth: 750mm, stroke rate: 28/min, max. stroke: 80mm, working height: 1066mm, machine dimensions X/Y/Z: approx. 2300mm/1300mm/2300mm, weight: approx. 4000kg. An on-site inspection is possible.
HSE 22-1100 ZE Cleaver Maximum clamping force 23.4t Cylinder stroke 880 mm Gap length maximum 1100mm Split material diameter: 350mm Flow speed 4.3 - 10.5 cm/s Return speed 7.5 cm/s PTO and electric motor PTO speed 540 rpm Drive power 400V 50Hz 5.1kW LxWxH 1050 x 1700 x 2500mm Weight 333kg G&STÜ-5981024
bore capacity in steel (diameter): 10 mm throat: 0 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible.
A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.
honing diameter: 110 mm stroke: 150 mm throat: mm total power requirement: 2,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 1250 x 535 x 845 mm weight: 74 kg : 1 St. Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x robust handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball bearing guides. (Double bearing) The drawer can be opened 100% Dimensions of the drawer 108 x 410 x 14 cm. Load capacity of the drawer 30Kg. Dimensions of the doors 520 x 460mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1150 mm width: 610 mm height over floor: 910 mm table load capacity: max. 450 Kg dimensions: 1170 x 640 x 135 m weight: 47 kg Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. ( IP20 ) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2500 kg fork length: 1150 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/Pu fork arm (length x width x thickness): 1150 x 155 x 50 mm weight of the machine ca.: 0,068 t dimensions: 1,5 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 127 x 127 mm dimensions of saw-band: 1140 x 13 x 0,65 mm band speed: max. 144 m/min total power requirement: 1,1 kW weight of the machine ca.: 15 kg dimensions: 500 x 300 x 400 m Portable and removable metal band saw Special features Powerful with 1100 watts. Including 2 saw bands, work table and integrated LED lighting. With adjustable, variable handle. Light and handy. For universal work in the workshop, on the construction site or for private use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 780 mm y-travel: 220 mm z-travel: 410 mm table length: 1100 mm table width: 270 mm spindle turning speed range: 40 - 960 U/min spindle taper: SK 40 total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,8 x 1,6 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 1250 x 535 x 845 mm weight: 74 kg : 1 St. Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x robust handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball bearing guides. (Double bearing) The drawer can be opened 100% Dimensions of the drawer 108 x 410 x 14 cm. Load capacity of the drawer 30Kg. Dimensions of the doors 520 x 460mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 1250 x 460 x 940 mm weight: 88 kg : 9 St. Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x sturdy handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball-bearing guides. (Double bearing) All drawers can be opened 100%. Internal dimensions of the upper wide drawer 105 x 40 x 10 cm. Inner dimensions of the upper 6 narrow drawers 49 x 40 x 7 cm. Inner dimensions of the lower 2 narrow drawers 49 x 40 x 23.5 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread splicer machine for veneer model KUPER FW 1150 second hand machine volt. 380/50
PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm
Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.
working area L-W-H: 10001150850 mm manual operated rotary table: Ø accessories and equipment:: Absaugung Number of working hours: 600 h voltage: 400 V total power requirement: 0,4 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 222,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm | suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films | suitable for dry nonwovens (airlaid, spunlaid) | folds: max. 10 folds vertically and 4 folds horizontally | size of tissue, unfolded:L(40-220)xW(30-240)mm | Grammage wet wipe: 30-80g/m? | max. roll diameter: nonwoven: 1000mm, film: 350mm | filling range liqui ...
projection area: 510x350 mm table-size: 300x170 mm longitudinal travel: 200 mm cross travel: 50 mm vertical movement: 150 mm amplification -fold: 20 voltage: 220 V dimensions of the machine ca.: 850x1100x1800 mm weight of the machine ca.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 30 mm square edge steel: 25 mm L-beam: 28 x 10 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Container Press SMC/CP 1100 Used Equipment Used device is kpt. reconditioned, wear parts were replaced, incl. oil change and new hydraulic hoses incl. UVV safety test and protocol, 6 months warranty Pressing force: 3.5 tons Swivel stroke: 95 degrees Connected load: 230 V/ 1.5 KW Machine dimensions: 980x 1190x 1900 mm WxDxH Machine weight: 250 kg
Paper cutting machine Polar 115 E, machine number 6731425, year of construction 1997, air table, light barriers, program control, Colour monitor, lift, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Rsbr Sevhatbsb Nwkeu You are welcome to visit the machine in our house by prior appointment.
An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.
Microcutter FD 112 Karl Schnell Stainless steel Dimensions: 1150x1200x1700mm Voltage: 400V / 50Hz / 3N Up to 3500kg/h Electric power: 51kW
Format 115 X Program Colour monitor Air table Side table on the right Polar Mohr LW 1000 Stapellift left Spare blade approx. 828 T Sections
Slightly used, technically flawless! Control: Simatic Tank capacity: 700l 1x Coolant pump high pressure: Flow volume 30l/min / 50 bar 1x Coolant pump low pressure: Flow volume 80l/min / 3 bar Fleece width: 390mm Connection: Voltage: 3x400V+PE/50Hz Power: 7.5kW Rated Current: 15A Pre-fuse maximum: 50A Dimensions LxWxH: 1700 x 1400 x 2100 mm Total weight empty: 650kg
Key data: 900 mm, 720 mm, 1160 mm
Drawer tool cabinet -Tiroclass 8 drawers height 95 mm Dimensions (L x W x H): 900 x 720 x 1160 mm Weight: approx 100 kg
max. workpiece length: 4500 mm profile spindle: 1 Stück main drive: 20 kW Control: Siemens Weinig Conturex 2 C 114 --------------------------------------- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm -------------------------------------- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: --------------------------------------- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: --------------------------------------- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head --------------------------------------- For horizontal and vertical drilling and milling work without tool changes --------------------------- ...
roll diameter: 300 mm throat: 450 mm table height: 480 mm saw band length: 3350 mm width of saw-band: 10 mm total power requirement: 2,2 kW weight of the machine ca.: 520 Kg dimensions of the machine ca.: 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Chromed Air Bed, Light Barriers, Programmable, Colour Display, Side Air Tables, Complete with Standard Accessories
Chromed Air Bed, Light Barriers, Programmable, Colour Display, Side Air Tables, Complete with Standard Accessories
T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, , Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark
REX wide planer, type SUPERMASTER 10/110-WW, Manufacture year 2009 (left hand version), Machine specifications, - Working width 80 - 1100 mm, - Working height 40 - 300 mm, - Feed speed 6 - 60 m/min, - Electric driven feeding system, 4x 9.2 kW, Spindle layout:, 1. Horizontal spindle bottom, motor 45 kW, 2. Horizontal spindle top, motor 45 kW, 3. Vertical spindle right, motor 25 kW, 4. Vertical spindle left, motor 25 kW, # 4 pc. chamfering device top/botoom and right/left, each 1.85 kW, 5. Vertical spindle right, motor 25 kW, 6. Vertical spindle left, motor 25 kW, - Upper part can be quickly adjusted with 10 lifting columns, - Driven feed rollers in the upper part of the machine, - Driven feed rollers in machine stand, - Vertical spindles with counter bearings, - Heavy duty outfeed unit with 4 rollers, - Feed speed with frequency converter, - Separate electricity trunk with separate contro ...
Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern
Manufacturer: Cascade Model: 11000 Probe Station Five (5) Manipulators: - 1× MH-2 with magnetic base - 4× Vacuum-base manipulators: - MH-0307-52 - MH-2 - MH-7267-46 - MH-0307-14 Three (3) Pico-Probe Power Supplies: - Two fully functional - One for parts or repair Four (4) Pico Probes Assorted DC Probe Tips – Variety of tip styles included for different probing needs. TMC Micro-G Table (Model 63-511) – Precision vibration isolation table for enhanced measurement stability. Find more here - / Contact us at -
Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110 Year 2009 - Serial-No. 23343509 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hour Top Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”) Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgs
Ablader für Stapel / Unloader for Piles Polar TR 1ER 110-4
Schneidmaschine / Cutting machine Schneider Senator 115 E
Hydraulic accumulator unit with pressure gauge and valve unit Manufacturer: Hydac Type: 6530-1A7/112A-330A Volume: 1 litre Inlet pressure: 90 bar Max. pressure: 330 bar Dimensions: 380×130×130 mm Weight: 3.7 kg Dismantled from: STAMA MC 325/S Condition: used Price plus VAT
Optimal for degreasing, possibly also preservation Automatic Loading - Basket Rotation Vacuum drying Batch dimension: 530320200
Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg
Injection molding machine ENGEL VC330 -110T Reference: VC 330 /110 Clamping force: 110 T Year: 2005 Number of working hours: 32,659 h Screw diameter: 30 mm L/D: 23.6 Maximum injectable volume: 113 cm3 Injection pressure: 2180 bar Overall platen dimensions : 740 x 470 mm Mold thickness: mini: 300 mm Weight: 7300 kg Dimensions: 4.36m x 1.48m x 2.04m + with 1 Sepro Robot and 1 conveyor belt
Key data: 140 °C
Temperature control unit of the tools - Tool Temp TT-118K / MP-988 (3 pcs.) Year of Make: 2020 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium - water Power: 29.3 Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Agilent 1100 HPLC -Agilent G 1311A quaternary pump (or bin.) -Agilent G 1315B DAD Diode Array Detector -Agilent G 1313A autosampler -Agilent G 1316A Colcom -Agilent G 1322A Degasser Solvent Box Complete with Agilent Chemstation on request
Injection moulding machine Arburg 470s 1100/290 YOC 2017 2 K
maximum number of results exceeded
please refine your search
