ewag ws 11 used for sale

Saw blade Ø: 360 mm Cutting range at 90° round: 110 mm Cutting area at 90° rectangle: 110 x 400 mm Cutting range mitred at 45° round: 110 mm Cutting area mitred at 45° rectangle: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space requirement: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg

Knapp roller conveyor accumulation 24V 2700-1170-1110 RA2377 Make: Knapp Running direction: both directions Roller width (RB): 1110 mm Nominal/outer width (NB): 1170 mm Length: 2700 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Motor Roller conveyors: Interroll EC300 24V Height frame: 90 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES nominal voltage: 24V Conveyor speed m / s: bis 1,25m/s Engine type: Interroll EC 300 Roll division in mm: 60 Jam detection: Lichtschranke Conveying length in mm: 2700 Nominal / outside width in mm: 1170 Stowage ...

Key data: 3000 kN, 2746 g/PS, 120 mm

GL300 PET P100/110 E120 in production running 72cav molds exworks south america 2002 auxiliaries Pet resin dryer Piovan DS528 Throughput 650 kg/h silo capacity 5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system TEC - 24X2X10.5

Knapp roller conveyor accumulation 1100-510-450 RA2382 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 1100 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 Conveying length in mm: 1100 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Stowag ...

6 axis mechanics/manipulator, max payload 10 kg inline, reach 1101 mm, IP 54, weight approx. 55 kg, controller KRC 4 compact 33kg, KSS 8.5.43, incorporated 2x Pneumatic air, 1x cleanair, 100 Mbit Busconector, 2x extern axis conector Resolver Input. smartPAD 4-2, Warranty.

Manufacturer: Indramat Permanent Magnetmotor , Type: MAC093C-0-FS-4HC/110-A-0/WI634LX, FREETEXT1: Atlanta Getriebe, FREETEXT2: Atlanta 5844097, FREETEXT3: P 4,25, FREETEXT4: 2,9 kg, FREETEXT5: N1 1500 U/min,

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120 The mentioned cards were taken out of a fully operational cutter.

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Limit switches, push buttons, safety switches, position switches, safety switches, safety limit switches -Manufacturer: Siemens, position switch -Type: 3SE5 112-0CR01 -Number: 1x switch available -Dimensions: 220/40/H35 mm -Weight: 0.3 kg

Manufacturer: KDP Kantenanleimmaschine, Type: KDP 111 SL, Year: 1995, Min-max edge material mm: 0,5-2,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Lasertechnik: yes, Mitre stations: yes, Radius milling axis adjustment: no, Year :1995

Manufacturer: Pilz Netzteil C-P8-NT- Netzteil 110/220 Volt, Type: 50-60 Hz, Model: 110 -220 Volt,

This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details.

Light source: 1 0 voltage: 24VDC V Capacity: 13 Watt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bütfering AWS, Type: AWS 1100, Year: 1981, Monting of the machine: Kombiaggregat, Sanding width mm: 1100, Sanding hight mm: 120, Sanding belt dimensions: 1900 X 1150, Längsschleifaggregate: Kombi/Bürste, Band 1 Leistung kW : ca.10, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 0,5, Constant table hight: no, Year :1981

Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,

Manufacturer: Wandres, Type: CH 29/1100/2750, Year: 2002, Dust removal brush: yes, Number of units: 2, kW Leistung Motoren: ca 2, Units mounted upright: yes, Working width mm: 2.750, Year :2002

Manufacturer: Statomat, Type: HB 112, Serial number: 1094009, Serial number: 4-008-39-0004, Power Output: 230/115 Vac,

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar/Anlagen werden geprüft und gereinigt, Year :2006

Manufacturer: Weber, Type: K 1-1100 V, Year: 2001, Monting of the machine: Walze, Double sided sanding line: no, Sanding width mm: 900, Sanding hight mm: 100, Number of sanding belts: 1, Continous adjustable feeding speed m/min: 2 - 14, Feeding engine kw: 1,3, Sanding belt dimensions: 2.620 x 1.150, Table hight adjustment by engine: no, Rollers: 1, Power belt 1 in kW: 15, Intermediate sanding of lacquer: no, Vacuum table: 2,2, Noise enclosure: yes, Brushing unit: 0,55 kW, Year :2001

Manufacturer: HSM Model: HSM V-Press 1160 eco Type of machine: Cabinet Press Year of manufacture: 2011 Pressing force: 532 kN Voltage: 3 phase, 400 V, 50 Hz Motor: 7.5 kW Rated current: 15.5 amps Find more here - / Contact us at -

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar, Year :2006

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar, Year :2006

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Airlesspumpe B & M, Type: BMP 1132, Year: 2004, Kolbenpumpen gesamt: 1, Transmission ratio: 32:1, Volumenstrom Doppelhub ccm 2: 72, Volumenstrom Doppelhub ccm 2: 72, Compressed air bar max: 256, Pneumatic pump: yes, Wandhalterung: yes, Year :2004

Manufacturer: Indramat Motor mit Getriebe Atlanta, Year: 1999, Type: MAC93C-0-FS/4HC/110-A-0, Kw output: ca.10, Bauart Flanschmotor: yes, Preis pro Stück Euro: 1500, Available: sofort, Year :1999

Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567

Perkins 1100 Series 1103A-33TG2 60.5 kW / 85,8 hp @ 1500 rpm; Power [PS]: 82; Transport weight [kg]: 420

Manufacturer: Inadramat , Year: 1999, Type: MDD 112B-N-040-N2L-130GAO, Motor mit Getriebe: Motor mit Tacho und Zahnrad, aus Maschine: Weeke BP 195 T, MdN Nm: 17,9-29,9, IdN A: 68, n-min: 4000, Motor mit Getriebe: Motor mit Tacho und Zahnrad, Price per unit Euro: 2000, Wight approx. kg: 36, FREE TEXT: Neupreis ca. 4400, Year :1999

Manufacturer: Klöckner, Type: EM4-111-DR1, Seriennummer: 02-3160 ,

Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...

Manufacturer: Tillecke, Type: RM 1100, Year: 1994, Control: hand, Dust removal brush: yes, Diameter of brushes: 220, Compressed air cleaning: no, Number of units: 2, Engine power - kW: ca.2, Number of rotations controlled: no, Working width mm: 1100, Through running hight mm: 80, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, Kw-Vorschub: 1,5, FREE TEXT: inkl.Absauventilator, Year :1994

Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: good (used) Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 180° Driven:  ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard)Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rateInternal coolant su ...

CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgGeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate Spindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rat ...

Oil-Insulated Power Transformers for Sale - Manufacturer: ELIN - Model: JDR 8000/110 - Power Rating: 8 MVA - High Voltage: - 124.85 kV (Position 9) - 110 kV (Position 0) - 95.15 kV (Position -9) - Low Voltage: 25 kV - Current Rating: - High Voltage: 37.5 A (Position 9), 42.0 A (Position 0), 47.7 A (Position -9) - Low Voltage: 185 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1960 - Status: Out of service since early 2024 - Notable Condition: Low oil inhibitor content and specific resistance; otherwise, oil is in good condition. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Working width: 1.100 mm Number of sanding units: 2 st. Workpiece thickness max.: 150 mm sanding belt measurements: 1.110 x 1.900 mm Motor roller: 15 kW Motor pad: 11 kW Feed motor: 1,5 kW Feed speed: 3 - 15 m/min. Overall size: 1.750 x 2.210 x 2.280 mm Weight: ca. 3.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quenching of the Batch The batch is quenched by immersion in a quenching medium (oil). --------------------------------------------------------------- Dimensions and Weights Overall Dimensions (including control system): - Width: approx. 3400 mm - Height: approx. 5600 mm - of which recessed in the pit: 650 mm - Length: approx. 5500 mm - Minimum required hall height: 7000 mm - Working height above floor level: 1200 mm --------------------------------------------------------------- Base Grate Dimensions: - Width: 705 mm - Height: 50 mm - Length: 1100 mm --------------------------------------------------------------- Usable Batch Space (including base grate): - Width: 700 mm - Height: 950 mm - Length: 1100 mm - Grate loading height: 900 mm - Gross batch weight (incl. base grate): 1000 kg --------------------------------------------------------------- Oil Bath: - Oil capacity: app ...

baler hydraulic power pump HSM V-press 1160 Plus

pressure: 100 t table length: 1250 mm table width: 900 mm table travel: 1200 mm dayligth: 700 mm upper clamping surface:: 1000x1200 total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Features: Nominal / outside width in mm: 700 scope of delivery: including supports without side guides, inklusive Frequenzumrichter, inklusive Lichtschranken Conveying length ...

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

Max. cone distance: 230 mm Number of teeth: 5-150 Diameter of taper hole at large end: 100 mm Taper: 1:19,7 Depth of taper: 150 mm Diameter of hole through spindle: 78 mm Diameter of spindle nose: 140 mm Max. offset above center: 114 mm Max. offset below center: 114 mm Max. distance from machine center to nose of spindle: 343 mm Min. distance from machine center to nose of spindle: 63 mm Cutter speeds: 17-115 rpm Feed (sec/tooth): 9-80 sec Floor space: 1900x2900 mm Net weight: 10750 kg

Key data: 119 KW, 149 kVA, 400 V

The Electroquell 149 kVA (119 kW) with Ricardo motor is a solid and efficient energy source for medium and large businesses. It is well suited as an emergency power supply or continuous power supply. Ricardo Motor ComAp IL-NT AMF25 controller Brushless Generator Soundproof housing Drip pan Rated power: 149 kVA / 119 kW Voltage: 400 V Frequency: 50 Hz Fuel: Diesel Options: Remote control, Larger fuel tank, ATS Warranty: up to 60 months

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

Inclined bucket mixer Manufacturer FMW Type 115200/21H475.1 Capacity 50 litres Material: Stainless steel heated, double jacket

Toyota BT Quick Lift pallet truck 2300kg 1150 mm RA2231 Manufacturer: Toyota Fork length: 1150 mm Fork width: 156 mm Carrying surface width: 520 mm Maximum load capacity: 2300 kg Lifting range: 85 - 200 mm With quick lift, 2x pumping is sufficient to be off the ground, with a maximum load of 150 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Key data: 1100 mm

DMC Polisand 110 RP wide belt sanding machine year 1998 Varnish Wide belt sanding machine total installed power approx, 23 KW Sanding width 1100 mm Workpiece thickness up to approx, 170 mm Motorized height positioning with digital reader Vacuum transport belt, F,LLI FERRARI vacuum unit with motor power 4 KW Feed motor power 1,50 KW Aggregate 1: grooved rubber sanding roller, with blowers Aggregate 2: sanding pad, with blowers Both groups are driven by an 15 KW motor 380 V / 50 Hz weight 2300 Kg Dimensions: 2,45m x 1,85m x 2,0m

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table glue unit refurbished machine is cleaned and checked and in very good condition.

GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low o ...