ewag ws 11 used for sale

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 365/150/H150 mm -Weight: 23 kg

Round bars, D8 to D28mm, 729kg, 657m, 1.1181 C35/C45 , new -70% Special price This stainless steel comes from a stock liquidation of a certified production company, so we offer an absolute special price. Material: 1.1181 C35/C45 Condition: bright, The delivery consists of: D 8 mm 89,5 kg ca 226,8m D 10 mm 12,0 kg ca 19,5m D 12 mm 103,5 kg ca 116,6m D 13 mm 68,5 kg ca 65,7m D 14 mm 16,0 kg ca 13,2m D 15 mm 50,0 kg ca 36,0m D 16 mm 72,0 kg ca 45,6m D 17 mm 107,0 kg ca 60,1m D 18 mm 24,0 kg ca 12,0m D 20 mm 54,0 kg ca 21,9m D 21 mm 34,5 kg ca 12,7m D 22 mm 33,5 kg ca 11,2m D 25 mm 41,5 kg ca 10,8m D 28 mm 23,5 kg ca 4,9m Rods in 3m length, some short ones are also included. Some rods are stainless steel 1.4104 6 month warranty according to our general conditions of sale.

100 pieces of inserts NEW consisting of: 30 pieces R390-11T3 for steel 30 pieces R390-11T3 for stainless steel 20 pieces R390-11T3 for aluminum 20 pieces R390-11T3 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.

Electric motor for sale. Characteristics: - ▲400V (50Hz) 1440 1/min: 4kW - Y 690V (50Hz) 1440 1/min: 4kW - ▲440V (60Hz) 1725 1/min: 4kW - ▲460V (60Hz) 1735 1/min: 4kW

Gear motor, electric motor -Speed: 11 rpm -Power: 0.18 kW -Brake: 380 V -Construction: angle B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Weight: 20 kg

Gear motor electric motor Electric gear motor -Speed: 16 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Dimensions: 620/300/H260 mm -Weight: 54 kg

Manufacturer: Webomatic Type: CD 110 Machine dimension L x B x H: 1140 x 900 x 1050 mm Two cutting-sealing bars: 500 mm Chamber dimensions L x B x H: 650 x 500 x 220 mm Possibility to work with gas Vacuum pump: 100 m3/h Machine cycle: 15 - 40 sec Voltage: 380 V, 50 Hz Power 2.2 kW

Hang Folder Grip Hole Eye Machine Automatic Hole & Eye Insertion Machine Type: 115 G3P Year of construction is not known. This machine has not been used for 10 years, and is in good condition

Laminator - paper over board Make Tùnkers Model S-1100 Year 2002 Workingwidth 1100 mm Substrate Feeder automatic suction feeder Details with pressing roll & pressing belt, spot label, vacuum belt, pressing belt Delivery delivery on a table OPTIONS we can deliver the machine with spot label functionn OR with lamination station, OR both, and even with a second glue station for triplle layer Condition can be purchaased `as-is`or refurbished on most parts (ask details) Available Direct or very soon

Digital Programs TSC, Colour Display, Chromed Air Table, Chromed Side Air Tables, Light Bariers, Standard Accessories

1700 : EL 400 30 pcs. DM 50 Steel axle M8 i 1100 : EL 470 100 pcs. DM 50 Steel axle 10mm Price per piece / as good as new

Key data: 90 mm

A first-class extrusion recycling brand EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Stainless steel couplings, pipe coupling -Type: FLEX 1L 114.3 -Inside: Ø 114.3 mm -From: 112.5 to: 116.0 mm -Pressure: 21 bar -Dimensions: 150/150/H95 mm -Weight: 1.1 kg

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inner diameter: 114.3 mm -From: 113.0 to: 115.5 mm -Pressure: 16 bar -Price: per piece -Number: 14 available -Dimensions: 160/142/H100 mm -Weight: 1.6 kg/piece

Transformer, transformer, converter, three-phase autotransformer -the transformers come from a UV paint drying facility -Input: 400 V -Output: -(technical data see photos) -Number: 8x transformer available -Price: per piece -Dimensions: 160/180/H195 mm -Weight: 14 kg/piece

Key data: 90 mm

EREMA Series Type 1109 TVEplus ecoSAVE for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Output up to 450 kg/h, electrics 460 volts, 60 hertz (US standard), available immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

SPECIFICATIONS: Value protection safe with key External dimensions: 550 mm x 500 mm, height: 1150 mm Weight: 285 kg Resistance level: I

Transformer, converter, inverter, three-phase autotransformer -The transformers come from a UV paint drying process -Input: 380 V -Exit: -Technical specifications: see photos -Number: 6x transformer available -Price: per piece -Dimensions: 160/180/H195 mm -Weight: 14 kg/piece

SPECIFICATIONS: Machining width: 1350 mm Sanding belt width: 1370 mm Sanding belt length: 1900 mm Steel roller: Ø 150 mm Processing thickness: max. 150 mm Total installed power: 10 hp Variable speed drive: 0.75 hp Predisposition to depressor or aspirator COMPOSITION: 01 Calibration Roller + Buffer Roller Unit 01 Scotch brite aggregate

One used cutting machine Polar 115 XT Tochscreen photocells chromed table Air table

Transformer, converter, inverter, three-phase autotransformer -The transformers come from a UV paint drying process. -Input: 400 V -Exit: -Technical data: see photos -Number: 14x transformer available -Price: per piece -Dimensions: 310/200/H415 mm -Weight: 60 kg/piece

Control card, output card, controller -Manufacturer: Servomac -Type: CT 112A -Number: 2x control cards available -Price: per piece -Dimensions: 130/290/H50 mm -Weight: 1.1 kg

throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control card, output card, controller -Manufacturer: Servomac -Type: CT 111B -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.16 kg

Limit switches, push buttons, safety switches, position switches -Manufacturer: Schmersal -Type: Z4VH 335-11z-M20 -Number: 1x switches available -Price: per piece -Weight: 0.56 kg

Laboratory fume cupboard, fume cupboard, suction -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

swing diameter: 370 - 800 mm weight of the machine ca.: 650 kg dimensions of the machine ca.: 20,41,3 m Open steady rest / setting block - fixed with 4 quills Bed width approx. 360 mm Total base width approx. 720 mm Centre height approx. 500 mm Space requirement approx. 1950 x 400 x 1300 mm Weight approx. 650 kg Working range: approx. Ø 370 - 800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: Ø 30 mm Shipping weight: 50 kg Packing: ca. 600400200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Switching power supply, control unit, modem, power supply -Type: SPA 15-11810 -Price: per piece -Number: 8 available -Weight: 0.6 kg

Belt conveyor slider 11170-55-50 Make: Transnorm Year 1997 Length:1170 mm Belt width: 50 mm Stand dimensions: 200x100 mm Current conveyor belt height: 100 mm Distance between mounting plate and swing plate: 100 mm (swing mechanism): 100 mm Maximum ejection rotation angle: 360° Belt conveyor speed: 0,64m/s Electrical data Belt conveyor motor data: V300-500, kw 0,25/S1 Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Antrieb: SEW Getriebemotor Foot plates: 200x100 Conveying length in mm: 1170 Belt width in mm: 50 Conveyor speed m / s: 0,64 Bauhöhe in mm (BH): 100 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG  ...

For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2

Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg

Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314

Caterpillar C4.4 - Unused - 110 kW - JKT

Schneidmaschine - Guillotine Schneider Senator Senator 115H Year 2003 - Serial-No. M-115H-013-04/10-03 Schnittbreite max. 1150mm / Cutting width max. 1150mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R) Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Nennstrom / Power 10 A 2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

T-slot plate, clamping plate with T slots, plate field, welding table, welding table -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 112 mm -Recording: MK2 -Drawing with the photos -Dimensions: 155/120/H115 mm -Weight: 4 kg

Pappschere - Board Cutter Polar Mohr 110 Serial-No. 244 Cutting length max. 1200mm Table width max. 720mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Steuerkarten für Schneidmaschine Polar 115 CE Control Cards for Guillotin Polar 115 CE Schaltpläne / Eletric diagram 115CE - E - 10 - 50 - Polar 012720 - Card 1 Polar 015099 - Card 2 Polar 012765 - Card 3 Polar 012991 - Card 4 Polar 015773 - Card 8 Polar 023467 - Card 9 Polar 015291 - Card 7 Polar dc429 - Card 11 Polar 015130 - Card 12 Polar 012384 - Card 13 Polar 012388 - Card 14 Polar 011245 - Card 15 Polar 012352 - Card 16 Polar 011442 - Card 19 Polar 011363 - Card TI Polar 011364 - Card TII Polar 011365 - Card TIII Polar 015138 - Card B1 Polar 011438 - Card 211825 Polar 011423 - Card 17 Polar 011422 - Card 18 Polar 011308 - Card 20 Polar 011440 - Card 21 Polar 011439 - Card B3 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Bezel, stick, lynette -Max. Passage: Ø 110 mm -Tip height: 220 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 440/320/H80 mm -Weight: 13.6 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 100 mm -Tip height: 70 mm -Drawing with the photos -Dimensions: 340/300/H150 mm -Weight: 18 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 120 mm -Tip height: 115 mm -Drawing with the photos -Dimensions: 380/260/H65 mm -Weight: 8 kg

Drive chain, duplex chain, roller chain -Length: 3.048 m -Price: per meter -Number: 2 chains available -Weight: 5.9 kg

Limit switch, button, safety switch, position switch, safety switch, safety limit switch -Manufacturer: Schmersal, position switch unused OVP -Type: MD 441-11y-M20 -Number: 1x switch available -Price: per piece -Carton dimensions: 160/105/H115 mm -Weight: 1.8 kg/piece

Braking resistor, charging resistor, damping resistor, filter resistor, brake chopper -Brake resistance: adjustable -Power: 110 Ohm / 2.5 A -Dimensions: 435/90 / H150 mm -Weight: 3.2 kg

Stauchmaschine - Creasing Machine for Cartons Krause SR 110 Serial-No. 222 00 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test