We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,312 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Technische Daten: - 6 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Volumenstromueberwachung - Druckdifferenzanzeige - Leistungsaufnahme 7,5 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Stromaufnahme 32 A - Filterflaeche 35,32 m2 - 90 Stück Filterschläuche - Filterregeneration automatisch, pneumatisch JET-System - Volumen-Staubtonnen 6 x 70 l ges. 420 Liter - Ansaugstutzen 300 mm (rechts) - Volumenstrom Nominal 6000 m3/h - Volumenstrom Minimum 5100 m3/h - Unterdruck 3.400 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 4350 mm, B= 1.100 mm, H= 2.500 mm - Gewicht: 1000 kg
new
- CNC Steuerung mit bedienfreundlicher Touchscreen Bedienung - max. Arbeitsbreite 900 mm - min./max. Werkstückstärke 5 - 35 mm - Motor Frässpindel 1,1 kW - Drehzahl 17.400 U/Min. - X-Achse Servomotor 0,75 kW - Y-Achse Servomotor 0,75 kW - Gesamtleistung 3,1 kW - Spannung 400 V, 50 Hz - 2 vertikale pneumatische Werkstückspanner - Gleitmittelpumpe - CE Konformität - Betriebsdruck 6 bar - Abmessungen L=1600, B=900, H=1500 mm - Gewicht 650 kg
new
Schwere Bandschleifmaschine für alle Schleifarbeiten. Kraftvoller Motor, starke Absaugung, vibrationsarmer Lauf. Einfache Bedienung. Serienmäßig mit 2 Bandgeschwindigkeiten durch einfaches Umlegen des Keilriemens. Einfacher, kräftesparender Transport durch Zerlegen oder Nutzung des Fahrgestelles auch auf Treppen. Geeignet für die Montage eines Papierstaubfiltersackes. Lieferung komplett mit Stoff - Staubsack und Kabel. Technische Daten: - Spannung 230 V 50 Hz - Leistung 2,5 kW - Gewicht 79 kg - Bandgeschwindigkeit 1.238 / 866 m/ min. - Schleifbandabmessung 200 x 750 mm
new
- Arbeitsbereich 6 - 18 mm - kleinste Dübellänge 6 - 18 mm - größte Dübellänge 150 mm - Arbeitsleistung ca. 7500 - 15000 Abschnuitte / Std. - Vorschub stufenlos regelbar - Antriebsmotor 0,37 kW / 750 U/min. - Fräsmotor 0,37 kW / 2900 U/min. - Sägemotor 0,37 kW / 2900 U/min. - Anfasmotor 0,37 kW / 2900 U/min. - Frässpindeldrehzahl 1450 U/min. - Sägespindeldrehzahl 2900 U/min. - Anfasfräserspindeldrehzahl 1450 U/min. - Absaugdurchmesser 3 x 80 mm - Luftbedarf ca. 900 m3/Std. - Maschinenständer aus Grauguss - inklusive Führung für Dübel Durchmesser nach Wahl - Abmessung L=1200, B=930, H=1080 mm - Gewicht 390 kg
new
Technische Daten: - max. Arbeitsbreite 250 mm - max. Arbeitshöhe 80 mm - Vorschubgeschwindigkeit 5 - 18 m/min - Sägewellen FI 50 mm - Sägeblatt Keilnut 16 x 5 mm - Drehzahl Sägewelle 4000 U/min - max. Sägeblatt FI 300 mm - Motor Sägewelle 22,0 kW - Motor Höhenverstellung 0,37 kW - Motor Vorschub 0,75 kW - Gesamtleistung 25,32 kW - Abmessungen L=3076, B=1250,H=1600 mm - Gewicht 2000 kg inklusive: - hart verchromte Tische
new
- max. Werkstückhöhe 200 mm - 4 Spannzylinder für Werkstückspannung, paarweise zuschaltbar - Tischabmessung links L =500 mm, B=400 mm - Tischabmessung rechts L =500 mm, B=400 mm - Hub rechter Tisch 40 mm - Hub Zylinder 80 mm - Pneumatikanschluss 8 bar - Gradeinstellung 0C, 22,5, 33C - Fußpedal zum Spannen und Lösen - CE-Ausführung - Abmessungen L=1160, B=500, H=1200 mm - Gewicht 150 kg
new
Technische Daten: - Spitzenweite 1500 mm - Spitzenhöhe 400 mm - max. Bearbeitungsdurchmesser FI 400 mm - Motorleistung 4,0 kW - Spannung 400 V / 50 Hz - Spindeldrehzahl 3000 U/min - Anzahl der gesteuerten Achsen 3 - Führung Linearführungen und Kugelrollspindel - Steuerung MACH3 + Software - pneumatische Werkstückspannung - V-Form Stahl - Fräsespindel für Flachgravur - Druckluftanschluss 6 bar - Abmessungen L=2700, B=1400, H=1750 mm - Nettogewicht 1800 kg
new
Technische Daten: - Sägeblattdurchmesser min./max. 80-815 mm - Sägeblattbohrung 10-220 mm - Max. Sägeblatt Dicke 6 mm - Zahnteilung 7-100 mm - Spanwinkel -10Cbis +40C - Schleifkopf hinten 6 bis 45C - Links-Rechts-Teilung der Zahnzahnspitze 45C, Zahnfläche 45C - Verstellbereich des Schleifzyklus max. 25 mm - Schleifgeschwindigkeit 0.5-6 mm/s - Vorschub Geschwindigkeit max. 24 Teech/min - Schleifscheibe Durchmesser125-32 mm - Umfangsgeschwindigkeit 28 m/s - Kapazität Kühlmittelpumpe 25 L/min - Kühlmitteltank Volumen 80 L - Gesamtleistung 0.75 KW2+0.15=1.65 KW - Abmesungen L=1800, W=930, H=1500 mm - Gewicht 700 kg
new
Technische Daten: - CNC Steuerung mit bedienfreundlicher Touchscreen Bedienung - max. Arbeitsbreite 500 mm - min./max. Werkstückstärke 12 - 25 mm - Motor Frässpindel 1,1 kW - Drehzahl 18.000 U/Min. - X-Achse Servomotor 0,75 kW - Y-Achse Servomotor 0,75 kW - Gesamtleistung 3,0 kW - Spannung 400 V, 50 Hz - 4 vertikale pneumatische Werkstückspanner - Gleitmittelpumpe - CE Konformität - Betriebsdruck 6 bar - Abmessungen L=1700, B=750, H=1250 mm - Gewicht 600 kg
new
- Drehzahl 6000 Upm. - max. Zapfenbreite 115+2R mm - max. Zapfentiefe mit Standardwerkzeug 10 - 45 mm mit Spezialwerkzeug 6 - 90 mm - Kapazität 12 Stück/min. - Tischneigung aufwärts 0-15C abwärts 0-30C seitlich 0-20C - Hauptmotor 5 PS - Motor 1 PS - Abmessungen L=1760, B=1150, H=1320 mm - Nettogewicht 1100 kg
new
Technische Daten: - 2 Spaene-Tonnen mit Klemmbuegel - Reststaubgehalt 0,1 mg/m3 - Ein- / Ausschalter - Leistungsaufnahme 3,0 kW - Netzspannung 400 V / 50 Hz /3 Ph ~ - Filterflaeche 10,2 m2 - 30 Stück Filterschläuche - Filterregeneration automatisch mit Rüttelmotor - Volumen-Staubtonnen 2 x 70 l - Ansaugstutzen 180 mm - Volumenstrom Nominal 2800 m3/h - Volumenstrom Minimum 1800 m3/h - Unterdruck 2200 Pa - max. Schalldruckpegel 72 dB (A) - Transport Abmessungen L= 2070 mm, B= 800 mm, H= 2.500 mm - Gewicht 450 kg
new
- trockenlaufend, luftgekühlt - 3~Motor 5,5/6,6 kW 960/1150 U/min - Spannung 400 V +/-10% 50Hz// 460+/-10% 60Hz usable60Hz: Y 400V+/-10% (ohne IE2) Bi-Metall 155CC, IsoKl.:F, IE2 - Vakuumsicherheitsventil - Abblaseventil - Abblaseschalldämpfer - Komplett montiert - Fettpresse mit Fett gefüllt - Farbe: Ra l9007 Graualuminium
used
Item No. 4954: 1 gebr. Bench drill Fabr. WÖRNER, Type B4, Bauj. 1990 with drilling capacity 4/6 mm - 650-12.000 min-1 Arb.-Ber.: Table 180 x 160 mm, Other: Drilling depth 50 mm Spindle cone B 10 Weight approx. 50 kg
used
Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm
6th Axis Motor of ABB IRB2600ID robot. Suitable for: Type A & B IRB2600ID-15/1.85 Type A & B IRB2600ID-8/2.0
used
complete with IEMCA BOSS 552 HD bar loader for 4 m bars High pressure CNC Fanuc 31 IModelB5 Number of axles 7 axles Diameter 38 mm Rated power 2 kW, 4 kW Total length 2,740 mm Total width 1,315 mm Total height 2,120 mm Weight 4,300 kg Prompt delivery Visible under power Year 2016
used
Capacities: Main Table: 560 x 405mm Top Table: 455 x 455mm Long Traverse: 610mm Cross Traverse: 320mm Vertical Traverse: 285mm Spindle Speeds: 50 – 2000rpm Infinately Variable Spindle Taper: 40 Int Feeds: 4- 106mm per min Infinetley Variable Electrics: 415v, 3ph, 50 cycles Motor: 3HP Complete with: Coolant DRO can be added at extra cost Approximate Dimensions: 3200 x 1200 x 2100mm Approximate Weight: 1750kg
used
For sale is a whole heating system installed in the container, all ready with custom-made chimney. Technical inspection was carried out by Dekra. The heater has only 16 hours of operation behind it, so it's almost like new. Incl. Weihaupt light oil burner, incl. heating oil tank, 5t incl. fireplace system, incl. mixed cooler, incl. condensate management for steam generators up to 1bar, incl. Additional equipment: condensate tank, incl. pipe separator + backwash protection filter + Single water softener VAD 25, incl. Dosing station and accessories, incl. Insulated sheet steel container Can be visited in Mölln. Technical data can be found in the pictures. Sale only to self-collectors, if you have any questions, please contact us.
used
This 9-axis STAR SR-32J type N swiss type turning machine was manufactured in 2018. It offers a maximum machining diameter of 32 mm, with spindle revolutions up to 7000 rpm and a spindle motor power of 7.5/3.7 kW. Key features include a counter spindle with a maximum grip and pass diameter of 32 mm and a rapid axes advance of 24 m/min. The machine also comes equipped with a bar feeder. Contact us for more information about this swiss type turning machine.
used
Envelope type over-wrapping machine for perfume package Full automatic Capacity: 25-30 per minute(depending on dimension of box) Machine is like new condition
used
Column Drill Column Drill Heavy Duty Drill Bluthardt Model 6 B AST Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.
used
Machine available visible in working order Table Size: X:2500mm Y:700mm Z:700mm X Axis Runs: 2500 Y Axis Strokes: 700 Z Axis Strokes: 700 Maximum Spindle Rotation Speed: 3,000 rpm Head Indexing: 2.5º Spindle power kW: 22 Government Unit: Selca 3045 Spindle connection: DIN 69871
used
MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...
Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...
used
Manufacturer: PAMA, Italy Model: AT 130/3 CNC Year of manufacture: 1996 Control: CNC SIEMENS SINUMERIK 828 Condition: Excellent, complete, machine will be equipped with a new CNC control SINUMERIK 828! Location: Machine in our warehouse Rudniki, Poland. Technical details Spindle diameter: ø 130 mm Rotary table: 1600 x 1600 mm Table capacity: 12000 kg X axis travel: 2500 mm Y axis travel: 2400 mm Z axis travel: 750 mm W axis travel: 2030 mm Max spindle speeds: 2200 RPM Main motor Power: 35 KW ATC magazine: 100 pcs Rapid feeds: - X- 10,000 mm/min - Y- 12,000 mm/min - Z- 6,000 mm/min - W – 12,000 mm/min - B – 2 Gear steps 2 ranges Torque in axes: X- 55 Nm; Y- W-B- 37 Nm; Z- 27 Nm Weight: 35 kg Max. tool diameter with all places occupied: 140 Max. tool length: 600 mm Equipment: - 1 psc.Rotary table - ATC for 100 pcs - APC 2 pcs 1600 x 1600 mm - External ...
used
Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.
used
Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.
MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,
used
Table Type Boring Machine STANKO Model: 2A620 Technical Details: Spindle diameter: 90 mm Planning shield diameter: 630 mm Table working area: 1120 mm x 1250 mm Max table travel: Longitudinal: 1000 mm Transverse: 1250 mm Max headstock vertical travel: 1000 mm Spindle travel: 710 mm Spinle taper: 7: 24 Number of spindle speeds: 23 Main motor power: 10 kW Machine dimensions: Length: 6770 mm Width: 3900 mm Height: 3100 mm Net weight: 16000 T
used
UNION Model: BFT 90/3 Manufacturer: UNION - Germany Model: BFT 90/3 Year of manufacture: 1982 Condition: very good, complete, no broken or missing parts Technical details: Spindle diameter: 90 mm Spindle taper: Morse'a 5 Working surface: 1400 x 1250 mm X axis travel: 1600 mm Y axis travel: 1250 mm Z axis travel: 1475 mm W axis travel: 710 mm Max. load on table: 2500 kg Installed power: 23 kW Machine weight: 9300 kg
used
Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use
new
Technische Daten: - Schnittlänge 2200 mm - Schnittbreite 1300 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000 / 4000 / 5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 5,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 420 mm - Gusstisch 1020 x 690 mm - Absaugstutzen 90 mm und 100 mm - Platzbedarf L=4600, B=3350, H=1500 mm - Transportabmessungen L=2240, B=1150, H=1150 mm L=2450, B= 460, H= 300 mm - Gewicht 900 kg Inklusive: - Parallelanschlag 900 mm mit Feineinstellung - Tischverlängerung 750 x 690 mm - Tischverbreiterung 1020 x 680 mm - größflächiger Tischausleger 1280 x 630 mm (verschiebbar) mit Materialrolle, Winkel- und Gehrungsanschlag (ausziehbar bis 3400 mm) - Tischöffnung 250 x 150 mm für schnellen und e ...
new
Technische Daten: - Schnittlänge 3200 mm - Schnittbreite 1300 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000 / 4000 / 5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 5,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 420 mm - Gusstisch 1020 x 690 mm - Absaugstutzen 90 mm und 100 mm - Platzbedarf L=6700, B=3350, H=1500 mm - Transportabmessungen L=2240, B=1150, H=1150 mm L=3350, B= 460, H= 300 mm -Gewicht 1000 kg Inklusive: - Sägewagen mit wartungsarmer Rundstangenführung - motorische Höhenverstellung - motorische Schwenkverstellung mit digitaler Anzeige - Parallelanschlag 900 mm mit Feineinstellung - Tischverlängerung 750 x 690 mm - Tischverbreiterung 1020 x 680 mm - größflächiger Tischausleger 1280 x 630 mm (versch ...
new
Technische Daten: - Schnittlänge 3200 mm - Schnittbreite 1300 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000/4000/5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 5,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 430 mm - Grauguss Maschinentisch 548 x 896 mm - Tischverlängerung 320 x 830 mm - Tischverbreiterung 890 x 950 mm - Absaugstutzen 1 x 120 , 1 x 80 mm - Abmessungen L=3200, B=3500, H=1500 mm - Gewicht 1100 kg Inklusive: - Ein-/Aus-Schalter am Sägewagen - Sägewagen mit wartungsarmer Rundstangenführung - motorische Höhenverstellung - motorische Schwenkverstellung mit digitaler Anzeige - motorische Breitenverstellung mit digitaler Anzeige - Bedienpaneel in Augenhöhe mit Vorlagenhalter,schwenkbar - Längenanschla ...
new
Technische Daten: - min./max. Sägebandbreite 15 - 200 mm - Zahnteilung 5 - 60 mm - Zahnhöhe max. 30 mm - Zahnformen PV, NV, KV - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 0-30 Zähne / min. (Drehzahlgeregelt über Potentiometer) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,2 kW - automatisches präzises Schleifen - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessungen L=800, B=1200, H=1750 mm - Gewicht 600 kg
new
Technische Daten: - min./max. Sägebandbreite 15 - 250 mm - Zahnteilung 0 - 60 mm - zahnhöhe max. 25 mm - Zahnformen PV, NV, KV, SB - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 12/90 Zähne / min.(8 Stufen Drehzahlgeregelt) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,5 kW - automatisches präzises Schleifen - Schutzkabine - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessungen L=1000, B=1500, H=1800 mm - Gewicht 600 kg
used
Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg
used
Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck
used
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
new
Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck
new
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
new
Technische Daten: - max. Arbeitsbreite 950 mm - min. / max. Durchlasshöhe 2 / 160 mm - min. Werkstücklänge 420 mm - Schleifbandabmessungen 980 x 2200 mm Schleifaggregat: - Kombiaggregat Walze / Schuh - gummierte und gerillte Kalibrierwalze 70 sh - Durchmesser Kalibrierwalze 120 mm - Motor 15 kW - Schleifbandgeschwindigkeit 18 m/s - Motor Vorschub 1,5 kW - Motor Höhenverstellung 0,37 kW - Gesamtleistung 16,87 kW - Spannung 400 V / 50 Hz - Druckluft 8 bar - automatische Teppichzentrierung - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Ampermeter zur Überwachung der Spanabnahme - Sofort-Stop mit Scheibenbremse bei Störung - pneumatische Schleifbandreinigung - Absaugstutzen 2 x 120 mm, 2 x 100 mm - Absaugvolumen 3500 m3/h - Abmessungen L=1780, B=1760, H=2080 mm - Gewicht 1700 kg
used
Collar shelving used, 4.20 m x 1.20 m condition very good, no content 4 shelf stand unilaterally 4200 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 12 height-adjustable standard rack arms (3 PCs per rack) -Load capacity at load Centre 600 mm -750 kg each arm / 2250 kg per stand -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor.
used
Collar shelving used, 4.70 m x 1.20 m condition very good, no content -4 shelf stand unilaterally 4700 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 12 height-adjustable standard rack arms (3 PCs per rack) -Load capacity at load Centre 600 mm -900 kg each arm / 2700 kg per stand -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.
used
Collar shelving used, 4.20 m x 1.20 m condition very good, no content -4 shelf stand double-sided 4200 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 24 height-adjustable standard rack arms (3 PCs per rack page) -Load capacity at load Centre 600 mm -750 kg each arm / 2250 kg per stand side -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.
used
Collar shelving needed, 4.70 m x 1.20 m, state very well, without content -4 shelf stand double-sided 4700 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 24 height-adjustable standard rack arms (3 PCs per rack page) -Load capacity at load Centre 600 mm -900 kg each arm / 2700 kg per stand side -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.
used
100 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 6,220,-- net from stock Offer consists of: 78 pcs stand or frame, 2.5 m, galvanized new 462 pcs. shelves, 150 kg load/compartment, galvanized used 26 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or ...
used
25 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 1,560,-- net from stock Offer consists of: 20 pcs stand or frame, 2.5 m, galvanized new 114 pcs. shelves, 150 kg load/compartment, galvanized used 7 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or o ...
used
Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg
used
Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg