eurostock typ as used for sale

Tetra Pak conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 meters with engines, straight pieces and curves Subject to prior sale

We offer used: Tetra Pak PT 10 Pull Tab Applicator was in operation with a Tetra Pak TBA 8 1500 ml slim line filling machine Year of construction 1997 In very good condition Subject to prior sale

We offer For Tetra Pak TBA 8 Calibration gauge for TBA 8 aseptic filling machines for the volumes: 1000 ml slim, 1000 ml base, 1500 ml slim LSC Prior sales reserved

We offer, in current condition For Tetra Pak TBA 8 Calibration gauge / Einmesslehre for TBA 8 aseptic filling machines for the volumes: 1000 ml slim, 1000 ml base, 1500 ml slim for TBA 8 aseptic filling machines for the volumes 1000 ml slim, 1000 ml base, 1500 ml slim Subject to prior sale

We offer, used, in current condition Paper roll trolley for e.g. Tetra Pak TBA 8 aseptic filling machine Subject to prior sale Pick-up or pick-up by truck with lifting platform or car with trailer

We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 8 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer

We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 9 / 19 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer

We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 9 / 19 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer

Screwcompressor with variable speed (n-drive) max 13 bar max 153 liter/sec - 9 m3/min 50 kW ElektronikonII control Weight: 1132 kg

Previously used as emergency back-up generator - automatic activation if there is a power outage - extra dieseltank - equipped with heating to ensure generator can immediatly start in optimal condition - soundproof box Iveco 4-stroke diesel - watercooled 12V electrical Stamford generator 4 poles - IP23 protection Single drive shaft H class insulation CEM6 control unit water separator filter dry air filter Only 108 hours on the clock! Diesel-oil (1) -- Naphte (2) -- Electr (3): diesel Max output: 60 kVa / 48 kW

COMPLETE TETRA PAK TPA/21-1000 SQUARE LINE, MANUF. IN 2001, CONSISTS: - TPA/21-1000 FILLER, V50, ONLY 14.000 RUNNING HOURS, INCLUDES A NITROGEN INJECTION STATION, - TCA/88 APPLICATOR - TCBP/70 WRAP AROUND PACKER, - CONVEYORS SYSTEM. CONVEYORS. EXCELLENT CONDITION WE PROVIDE DISMANTLING, INSTALLATION AND START UP SERVICE.

Item number: 90458-0601 Photocell for jaw system Tetra Pak aseptic filling machine

Article number: 90458-0601 Photocell for Tetra Pak aseptic filling machine

Asphalt paver Fortress Allat 450P. maximum width 3m. Two conveyors.

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Manufacturer: MTF-Technik Year of construction: 2011 Model/ Type: GL-HM140 Condition: Used T20 cleats - approx. 700mm pitch total length: approx. 4600 mm Total width incl. motor: approx. 860 mm Total width without motor: approx. 650 mm Belt width: approx. 625 mm Strap Type: Smooth with studs Material: Steel/ Aluminum Frame height: approx. 110 mm Includes feet on wheels (height adjustable) Includes engine Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to ...

ASPARAGUS PEELER, CHRISTIAENS AGRO SYSTEMS, TYPE: 1350-6 Technical description: Machine number: 062 906 Heads number: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1650 x 2000 x 1600 mm

Assembly table Ruchser RU-BM-2500-PS-SONDER Year of construction: 1997 Ready for pickup, price EXW The table is in good condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

ZHONGSHAN HANDSOME INDUSTRIAL EQUIPMENT CO. HX-O/HX-U/HX-I/HX-M/HX-E series TV/Small Appliances/Electronic home appliances Assembly Lines + S-Burning room Available the following lines: LINE 1: Jobs: 22 Measurements: 17.70 m x 2.85 m LINE 2: Jobs: 12 Measurements: 16.60 x 0.6 m LINE 3: Jobs: 10 Measurements: 12 x 2.4m Specifications: Voltage: 3 phase, 5 wire, 3890V+-10%, grounded. Frequency: 50/60HZ Rated power: 15KW Rated current: 30A Air pressure: 0.4-0.8Mpa, clean air Temperature: 0-50ºC Humidity: 40-85% Running speed: 9 m/min.

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Cast iron bed 1305 x 800 x 100 mm - No Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 530 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Cast angle plate 2000 x 1000 x 860 mm Length: 2000 mm Width: 1000 mm Height: 860 mm T-slots dimensions: 34 x 26 mm Weight: 2,3 T

Swivel rotary table Ø 1000 mm Shelf diameter: Ø 1000 mm x height 650 mm Rotation at 360° Vertical swivel Weight: approx 650 kg

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.

#4602 T-SLOT ASSEMBLY TABLE, WELDING TABLE Welding table with "dovetail" fastening grooves Dimensions: 1100x1400x800mm Weight: 1880 kg

Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg

Rotary Drive, Actuator, 90° Rotary Drive BERNARD ASP 25 ( ASP25 ) 150 Nm 0,0,25 rpm 0,03 KW 400 V hollow shaft: Ø 20 mm Flange diameter: Ø 125 mm New ! Dimensions: 470 x 340 x 320 mm

Asonators LBF 630 V 10.5 / 21.0 NM

Racks, straight toothed, 6 pieces PAGUS 30 x 30 mm length: 1x 325 mm, 4x 350 mm, 1x 380 mm tooth spacing: 9,42 mm (module 3 ) Tooth depth: 6 mm Tooth width: 30 mm Gearing: straight Material: plastic Other quantities on request ! used, tested ! Dimensions ( packaging ): 400 x 100 x 70 mm

Circuit Assembly, Circuit Card Assembly, Electronic Module ELEKTRO SPEZIAL BREMEN 5999-12-154-4180 W/F41B/60441/63007 unused ! Dimensions (board): 120 x 55 x 20 mm Dimensions (packaging): 160 x 100 x 60 mm

Rectifier assembly, rectifier RFT 16x SY170/2 Umax: 200 V, Imax: 25A ( per rectifier diode ) 6 Heat sink Base plate: 280 x 170 mm New ! Dimensions: 280 x 170 x 75 mm

Aspirating smoke detector, one intake line SECURITON ASD 535-1 5000623.0101.131210 Operating voltage:10.5 to 30 V DC Current consumption: max. 290 mA Smoke sensor: SSD 535-3 used, tested ! Dimensions: 400 x 270 x 150 mm

Aspirating smoke detector, one intake line SECURITON ASD 535-1 5000623.0101.010409 Operating voltage:10.5 to 30 V DC Current consumption: max. 290 mA Smoke sensor: SSD 535-2 used, tested ! Dimensions: 400 x 270 x 150 mm

Actuator sensor box with connection cable, 2 pieces LUMBERG ASBV4-5/LED Number of distributors: 4-way Status indicator: LED approx. 6.0 / 6.5 m Connection cable Industrial plug HARTING HS12 400 V, 16 A used, tested ! Dimensions ( Actuator Sensor Box ): 120 x 60 x 25 mm Dimensions ( industrial plug ): 185 x 57 x 60 mm Dimensions ( packaging ): 300 x 300 x 80 mm

Actuator sensor box with connection cable, 2 pieces LUMBERG ASBV4-5/LED Number of distributors: 4-way Status indicator: LED approx. 4.0 / 6.0 m Connection cable Industrial plug HARTING HS12 400 V, 16 A used, tested ! dimensions ( actuator sensor box ): 120 x 60 x 25 mm Dimensions ( industrial plug ): 185 x 57 x 60 mm Dimensions ( packaging ): 300 x 300 x 80 mm

Actuator sensor box with connection cable, 2 pieces LUMBERG ASBV8-5/LED Number of distributors: 8-fold Status indicator: LED 2x approx. 2,2,8 m connection cable type 909135 16x 0.5 mm² / 3x 1.0 mm² industrial plug HARTING HS12 400 V, 16 A used, tested ! Dimensions ( actuator sensor box ): 153 x 60 x 25 mm Dimensions ( industrial plug ): 185 x 57 x 60 mm Dimensions ( packaging ): 280 x 280 x 100 mm

Actuator sensor box with connection cable LUMBERG ASBSV8-5/LED Number of distributors: 8-fold Status indicator: LED approx. 12,5 m connection cable type 909135 16x 0.5 mm² / 3x 1.0 mm² industrial plug HARTING HS12 400 V, 16 A used, tested ! Dimensions ( actuator sensor box ): 153 x 60 x 30 mm Dimensions ( industrial plug ): 185 x 57 x 60 mm Dimensions ( packaging ): 350 x 350 x 80 mm

Asynchronous motor, servo motor, with forced fan ELBTALWERK ACHA 132.4-6 ( ACHA 132.4-6 ) 4,5 / 7,5 / 7,5 / 3,6 kW 430 / 690 / 1605 / 2805 rpm 255 / 400 / 400 / 400 V 3AC 23 / 36 / 84 / 143 Hz IP 54 Shaft diameter: Ø 42 mm Wavelength: 110 mm Groove width: 12 mm Flange: Ø 250 / 256 x 256 mm bolt circle diameter: Ø 300 mm hole diameter: Ø 19 mm motor base: 355 x 260 mm hole spacing (parallel to the shaft): 317,5 mm hole spacing ( transverse to the shaft ): 215 mm hole diameter: Ø 11.5 mm forced fan: R2D 220 AC 02-12 ( R2D 220 AC 02-12 ) 0,08 kW 2540 rpm 400 V 3AC New ! Dimensions: 740 x 355 x 345 mm

Assortment Carrier clamps, girder clamp, steel girder fastening, 4 types, 210 pieces ERICO CADDY 40x CATHP24SM, Article number: 181075 /40X 30x CATHP58SM, Article number: 181076 85x EM912 P21, Article number: 170070 55x EM24SM P21, Article number: 170530 New ! Dimensions ( packaging ): 290 x 260 x 210 mm

self-assemblable connector, 7 pieces BALLUFF BKS-S105-00 BCC00Y3 Connection: M12x1 connector, straight, B-coded Pole: 5 Diameter: Ø 20 mm Length: 62 mm New ! Dimensions ( single plug ): 68 x 20 x 20 mm Dimensions ( packaging ): 140 x 140 x 60 mm

self-assemblable screw terminal, 16 pieces MURR ELEKTRONIK 7000-12721-0000000 Connection: M12x1 connector, straight Pole: 5 Diameter: Ø 20 mm Length: 60 mm New ! Dimensions ( single plug ): 60 x 20 x 20 mm Dimensions ( packaging ): 300 x 140 x 60 mm

Assembly crane PFAFF 2136007 Capacity: 2500 kg 230cm x 110cm x 180cm lifting height: 1,70m used, tested ! Transport dimensions: 3600 x 800 x 800 mm

Heat-shrinkable rear sleeves, 5 pieces 3M, GT ELECTROTECHNICAL PRODUCTS 4x HDCW 35/10 250 mm length: 250 mm, Sch Fuselage area: 35 - 10 mm 1x RM 100-30/750 Product no.: 730750 Length: 750 mm, Shrink range: 100 - 30 mm New ! Dimensions ( packaging ): 1020 x 110 x 110 mm

Electro-pneumatic assembly JOUCOMATIC 267 90 001 261 90 067 192 00 002 881 28 409 230 V AC 4 W New ! Dimensions: 195 x 125 x 85 mm

Attachable socket, 6 pieces IFM ELECTRONIC 2x E10136 SDOGH042PLSFKPG straight design 4x E11510 SDOAH042MSSFKPG angled design for use in confined spaces New ! Dimensions ( packaging ): 140 x 140 x 50 mm

Lubrication pump, gear pump aggragat SAXONIA ASL 0.1 pn: 1.6 MPa Q: 0.1 l/min engine: 0.12 kW 220 / 380 V Dimensions: 270 x 130 x 160 mm

Automotive relays, automotive relays, 11 pieces PAGUS Control voltage: 24 V DC 1x BOSCH 0332204203 Load current: 10 / 20 A, 1 changeover contact 3x BOSCH sch 0332204201 Load current: 10 / 20 A, 1 changeover contact 3x BOSCH 0332204204 Load current: 10 / 20 A, 1 changeover contact 1x TYCO V23134-J56-X408 Load current: 70 A, 1 NO 2x MAN 89 99 43 load current: 70 A, 1 NO Other quantities on request ! New ! Dimensions ( packaging ): 195 x 100 x 50 mm

Assortment round plug, 14 pieces NEUTRIK 6x NC4MX, 4-pin 8x NC6MX, 6-pin Other quantities on request ! New ! Dimensions ( packaging ): 68 x 19 x 19 mm Dimensions ( packaging ): 150 x 750 x 40 mm

Current transformers, instrument transformers, clip-on current transformers MBS ASK 41.4 ( ASK41.4 ) Rated current: 200 A Secondary current: 5 A Apparent power: 7.5 VA Accuracy class: 1 Frequency: 50 - 60 Hz New ! Dimensions: 70 x 58 x 86 mm