europe baler used for sale

Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported ove ...

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu

Technical data bale opener and dewiring line with weighing system Bale feeding belt, pos. 1: Belt length 11,000 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 7,000 kg Conveying speed 0.2 m/second Drive power 3 kW Pitch of idlers 250 mm Side wall height in feed area 70 mm Side wall height impact wall 1,000 mm Feed height 1,800 mm Industrial weighing system for the bale feeding belt (additional equipment): Weighing terminal type IT1 Ethernet 8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each Preload of the system 5,000 kg Feed belt to bale opener and dewirer, pos. 2: Belt length 9,500 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 6,000 kg Conveying speed 0.25 m/second Drive power 9 kW Pitch of idlers 250 mm Side wall height 800 mm Pitch 13 Bale opener and dewiring station, pos. 3: Type B/E 3213 Year of manufactur ...

Plug and play potato scrambler., TECHNISCHE GEGEVENS, - Capaciteit :± 450 kg per uur input. Afhankelijk van soort product, gewenste schrap/schiltijd, de kwaliteit van het product en snelheid van de operator., - Constructie : RVS 304., - Vulinhoud : ± 25 kg., - Maximale productdiameter : 150 mm.Capaciteit ± 100 – 600 kg. per uur afhankelijk van soort en kwaliteit van het product en de gewenste snijmaat, - Schakelkast : Geïntegreerd in machine., - Voeding : 400 Volt, 50 Hz, 3 fase + aarde + nul (Europese norm). 24 Volt op bedieningsknoppen., - Aantal motoren : 1, - Totale electriciteitsconsumptie : max. 1,1 kW/uur., - Aansluitwaarde : 3,3 Amp., - Stekker : 16 A CEE, 5 polig., - Waterverbruik : Max. ca. 450 ltr/uur (naar behoefte regelbaar)., - Luchtverbruik (alleen bij automaat) : Afhankelijk van schraptijd., - Gewicht : ± 200 kilo, onverpakt., - Keurmerk : CE genormeerd., Construc ...

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN.

Reference ID PP-40825 Category Label Printer Manufacturer Nilpeter Model MO4 Year Built 2010 Condition Good Location Europe Availability Immediately Machine Description 6x offset unit 2x Flexo Unit 9x IST BLK 200 w double Teknek 1 x Corona Nikka 4K inspection camera + monitor BST register camera + monitor Crossbar unit 6x ink dust extraction Rubber blanket mointing table Offsetplate mointing table software with Pre Press Interface Baldwin water control Clear Flo water cleaning system Hafner – Müchler cool/warm system for the inking units (rubbing rollers) Unicold cooling system for the UV units Anilox: 10 pieces 74 blanket cylinders Platecilinders: 18 x 21" 15 x 22" 15 x 20.3" 4 x 22.5" 15 x 18.625" 15 x 24" 17 x 26" 15 x 25"

Manufacturer | manufacturer: Battenfeld Fischer Machine Type | machine type: VK 1-20 Stations | stations: Einstation / Single Year of construction | Built: 1985 Location | Location: Europa/ Europe Clamping force | Clamping force: 180 kN Control Type | control system: Siemens S7 + Beckhoff for WDS & PWDS Extruders | Extruder: 80/20D Extrusion Head | Extrusion Head: S1-120 (Original Battenfeld) Mould dimensions mm | Mold dimensions mm: 480/540/2155 Bottle volume max. | bottle volume max.: 20 L On-Screen Language | monitor language: German/ Deutsch Delivery time | Delivery time: 2-4 weeks

Key data: 900 , 252 , 48

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault  ...

automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side

Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.

Gurutzpe Super BT lathe. Distance between centers: 8.000mm. Swing: 2.000mm. Swing in carriage: 1.680mm. Swing on gap: 2.360mm. Spindle bore: 102mm. Equipped with chuck and steady rest. DRO Fagor. CE protections and european certificate for second hand machines.

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Baler Austropresses, type APK E55-1400, year of manufacture 2016, with free-baling device Manufacturer: Austropressen Type: APK E-55-1400 Year of construction: 2016 Propulsion: 2 x 22 KW Press force: 55 t Filling opening: 1400 x 1020 mm (LxW) Binding: 5-fold, automatic Throughput at 35 kg/cbm: 7.5 t/h 60 kg/cbm: 13.2 t/h Bale weight: 450- 550 kg Bale dimensions: 1100 x 750 x max. 1600 mm Machine dimensions: 8850 x 2700 x 3400 mm (LxWxH) Machine weight: approx. 14,100 kg Drive 2x22kW for maximum energy efficiency. With low material loading, the machine works with only 22kW drive. Only when the filling quantity is increased is the full drive activated in order to achieve the required throughput capacity. Materials: paper, cardboard, foil, plastic, PET bottles, fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no li ...

Combi steamer Manufacturer: UNOX / Type: BAKERTOP Specifications: Model oven: XEBC-06EU-E1R Including base frame & extractor hood 400V / 50/60Hz / 9.9 kW / 16 A CEE plug 230V Schuko plug for the extractor hood Year of construction: 2019 RRP with base: approx. EUR 10,000 General: BAKERTOP MIND. Maps Bakery Oven / Combi Steamer by Unox Body made of stainless steel Low energy consumption due to high-quality insulation Door with double security pane Air gap prevents strong heating of the outer pane inner glass pane can be opened for cleaning Door with carbon fiber door lock and long-bend door hinges Door hinge left / door handle right (door hinge can be changed to the right – see accessories) with condensate tray under the door (direct drain connection) Safety thermostat height-adjustable screw feet Baking chamber: completel ...

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Otto Hänsel Model : Strada 1200 - candy embossing line for solid candies without filling, composed of: 1x Ruffinatti Flavour Mixer 1x strand former type HKR 2304 1x extrusion machine type HZU 2606 1x Embossing machine type UP 2905 with 4x embossing inserts 1x Euromec cooling channel with new belt 1x compressor and evaporator for cooling channel We offer this machine for sale "as is" to the exclusion of any warranty/warranty claims or representations. from the location Northern Europe; Unpacked

: neu : 2023 : 8285 : prompt, Zwischenverkauf v : Türkei : 39900 € : 1 : 30 to : 1050 mm : 3 (Y1, Y2, X) : 160 mm : 850 mm : 250 mm : 390 mm : hydraulisch : 10 mm/s : 130 mm/s : 400 mm : 250 mm/s : 835 mm : 104 mm : 75 l : 5.5 kW : 2470 mm : 1250 mm : 2245 mm : 3250 kg Y1, Y2, X - 3 Axis Control Unit - DT 10 Touch screen 2D graphic (Remote Control) Back gauge: motorized &, linear guide &, ballscrew European clamping system European clamping system top tool European style bottom tool holder Support arms with T-Slot Safety side covers (Non CE) World known electrical equipments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Paal Likon 80/60, built in 2004, very good condition Specifications: Manufacturer: Paal Type Likon 80/60 Year of construction 2004 Hours 13265 Press force 60 t Drive power 75 kW Total power 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, length variable Setting 4-fold automatic Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Version with a 520 l pump, drive 75 kW, for an increase in power to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale ...

NUMBER 192 POSITIONS FOR MACHINES PERFECT CONDICTIONS AVAILABLE IMMEDIATELY LOCATIONS EUROPE

automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 270S 350-60 Clamping force: 35 t Production year: 1999 Injection weight: 17 (PS) g Injection unit: .../60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Injection weight: 17 (PS) g L/D ratio of screw: 24.5 Tool closure system: 350/... Clamping force: 35 t Distance between columns: 270 x 270 mm Ejector force: 30 kN Opening distance: 350 mm Maximum plate distance: 525mm Ejector stroke: 220 mm General data: Total installed power: 12.6 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other periphera ...

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 220S 150-60 Clamping force: 15 t Production year: 1999 Injection weight: 14 (PS) g Injection unit: .../60 Screw diameter: 15 mm Specific injection pressure: 2330 bar Injection volume: 15 ccm Injection weight: 14 (PS) g Pump motor power: 5.5 kW Tool closure system: 150/... Clamping force: 15 t Distance between columns: 220 x 220 mm Opening distance: 275 mm Maximum plate distance: 425mm General data: Total installed power: 11 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other peripherals and injection machines. www.europnet.eu

Model DPL-1530HP-4 kW 8 levels 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control FSCUT 2000ER Laser head Raytools BM115 autofocus Cooler Hanli 3.8 kW Air blower 11kW Nesting Software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure switch and SW control Voltage stabilizer 48-72 KVA Enclosure according to laser class 4 Heavy duty machine base. High performance servo motors. Intelligent cutting control system, easy operation Fast pinning, supported by segment and step pinning technology Specialized air duct with oversized caliber, makes the smoke exhaust smooth. Completely enclosed construction European CE standard Dual Shuttle tables offer a high level of safety and comfort. Positioning accuracy ±0.05/1000mm Repeating positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet loading 1 ...

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication

Servo motor with gearbox and encoder, permanent magnet motor SIEMENS 1 FT5076-1AF71-3EA0 ( 1FT5076-1AF71-3EA0 ) 3000 rpm IP64 375 V Gearbox: SUMITOMO CYCLO EUROPE TYPE XFCGS i = 17 Shaft: Ø 38 mm Flange: Ø 200 mm Encoder: 6FX2001-2CB00 components also available separately ! spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 710 x 200 x 240 mm

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Chemical pump, centrifugal pump, magnetically driven centrifugal pump, water pump IWAKI EUROPE GmbH MDM40-1301EKKF075I-E2 Q: 417 l/min H: 18 m engine: 7.5 kW 400 / 690 V as good as new TOP condition ! Dimensions: 900 x 300 x 400 mm

High-pressure pump, pump for baler HSM 500.1 VL with 7.5 kW motor

Laser heater Qlima SRE 8040 TC silver Only 8 pcs available Stock clearance This powerful SRE 8040 TC laser heater brings a lot of heat into your home. The integrated digital display makes it easy to select the desired temperature or function. The built-in thermostat adjusts the power according to the set temperature. In addition, the SRE 8040 TC is equipped with most standard functionalities such as a day timer and fuzzy logic. Thanks to the "Fuzzy Logic" of the Qlima SRE 8040 TC, the room has the preset temperature at the desired time. This laser emitter is also equipped with an automatic burn time extension. When the fuel runs low, the device automatically switches to a lower combustion level, so that the refilling of the fuel is postponed for some time. The lasers from Qlima, full of technical ingenuity! The heater comes with a handy fuel siphon pump. Fuel When choos ...

Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg

Fiber laser cutting machine 1500x3000 mm 12000W Raycus laser source High-performance machine base. High-performance servo motors. Intelligent cutting control system, easy operation; Fast start-up, supported by segment and steppiecing technology; Specialized air duct with oversized caliber, makes smoke exhaust smooth. Fully enclosed design; European CE standard laser protection. Two shuttle tables offer a high level of safety and comfort Technical Parameters: Working area 3000x1500 mm X-axis travel 1520 mm Y-axis travel 3020 mm Z-axis travel 300 mm X,Y positioning accuracy ±0.05 mm X,Y repeat positioning accuracy ±0.03. mm Acceleration 1.3 m/s² Max. Simultaneous positioning speed 120 m/min Table load 3000 kg Machine size 8100×2812×2640 mm Laser power 12000W Raycus FSCUT8000B control system Connected load 68 KW Voltage: 380V/50Hz Prices DPL-1530 H ...

Hydraulic power pack pump, pump for the baler HSM 1160 Plus

New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor.

Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91

AUTOBOX HIPAK 2675 AUTOMATIC BOXMAKER Year of production: 2008 Max 2400 mm Min 100mm x 330 mm Blade clearance – blade distance max 1400 mm blade clearance – blade distance Min 65 mm Knife width 8 mm Machine is in good condition can be seen in production in Europe

Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard  ...

Durable construction that facilitates maintenance work under all bridges. Thanks to the solid construction, it is possible to load a large number of tools or employees on the lower part. The machine equipped with large wheels in good condition, and hydraulic brakes makes it possible to move under and work without entering the bridge. Ixkmdlnmh Possible transport in Polish and Europe, of course, by prior arrangement. Wagon under the bridge - Specially developed trolley for work under bridges - Very stable construction - Everything in the price or you get a set - The trolley is controllable and equipped with air brakes - Dimensions approx. 12 meters long without pulling, drawbar approx. 1.5m. 2.5 meters wide and 3.1 meters high

Baler Presto HPK 50 HS, year of manufacture 2014 Manafacture: Presto Type: HPK 50 HS Year of construction: 2014 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg

Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.

faceplate diameter: 3.000 mm swing diameter: 4.000 mm turning height: 2.500 mm Control: Fanuc 0i-T max. workpiece weight: 30.000 kg table:: table diameter: 3.000 mm table speeds: 1 - 100 1/min power capacity - table: 60/75 kW C - Axis:: Working speed: 0 - 180 °/min max. table speed: 0,5 1/min turret slide:: Shank diameter: 50 mm spindle cone: ISO 7/24 No.50 Spindlespeed: 15 - 1.500 min/-1 power capacity - Tool Spindle: 22 / 26 kW ram cross section: 300 mm axis stroke:: x-axis: 2.335 mm z-axis: 1.600 mm cross rail adjustment: 2.000 mm Tool-Presetter:: tool taper: MAS BT 50 number of toolpositions: 24 (2x12) pos. max. tool weight: 90 kg draw bolt: DIN.69872 feeds:: rapid feed (X / Z): 8 m/min rapid traverse of the crossrail: 500 mm/min total power requirement: - kW weight of the machine ca.: 95 t dimensions of the machine ca.: 14,0 x 7,4 x 9,0 m Documents: Coolantsystem: 4-Jaw-Chu ...

Can filler and seamer Ortmann + Herbst Hansacan 30 / 5 Type filler: Hansacan with 30 filing valves, year of manufacturing: 1992, Type seamer: Ferrum F 505 G with 5 closing stations, Year of manufacturing: 2010 Yapacity: 21.000 cph by 330 ml standard cans - product beer Yapacity: 24.000 cph by 330 ml standard cans - product CSD Can type: 211 / 202 Electric system: Siemens S 7 with touch panel The filler and seamer are in an absolute top conditon and still in production in a European brewery until January/Februay 2024

Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW Safety level 2+1 according to DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW

Baler Bollegraaf HBC 100 A, built in 2001 Specifications: Manufacturer: Bollegraaf Type: HBC 100 A Year of construction: 2001 Press force: 100 t Drive power: 75 kW Filling opening: 1100 x 1600 mm Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), length variable Bale weight: 550-880 kg Binding: 5-fold vertical Dimensions: approx. 11750 x 2500 x 3470 mm (LxWxH) Weight: approx. 34000 kg

Professional, stable and compact packaging machine from a renowned European manufacturer for tape width up to 50 mm. Maximum carton dimensions approximately: width 500 mm x height 500 mm; length unlimited. -Double-sided closure at the top and bottom. -Transport speed approx. 20 m/min. -Different carton formats are infinitely adjusted in height and width via a quick adjustment system (without crank). -The carton sealer can be moved and locked by means of castors. The working height is adjustable. The machine can be demonstrated under electricity.

Professional and high-performance strapping machine from a renowned European manufacturer with internal frame dimensions of approx. 650 x 500 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated threading system as well as a reel quick-change system. -Strapping tension adjustable. -Soft tension possible. -Automatic belt insertion. -Strapping release on both sides via foot pedals. -Wear-free belt guides with quick-change system. machine can be moved and locked via castors. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine was checked or overhauled by a service technician. It can be demonstrated under electricity.

PICKLING CABINET FOR CLEANING INOX PRODUCTS BEIZSCHRANK FÜR DIE REINIGUNG VON INOX-PRODUKTEN CABINET INTERNAL DIMENSIONS Length : 5.000 mm Width : 2.800 mm Height : 2.900 mm Material : Insulated sandwich panels, fire protected Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Emergency door : 1 set Working temperature: RT WORKBENCH Length : 1.800 mm Width : 800 mm Height : 900 mm Ventilation : AISI304 extraction fan, circular air duct Material : PP material body, removable splash covers Grid : AISI304 stainless steel Sink : PP material Accessories : Hose reel, wardrobe Droplet separator WASTE WATER ROOM Length : 2.000 mm Width : 2.800 mm Height : 2.900 mm Basement : 150mm Illumination : 2x36W Exproof Zone-2 Entry door : Insulated sheet metal door Working temperature: RT Emergencydoor  ...

Professional packaging machine from a renowned European manufacturer, which is equipped with many options and adjustment options. Suitable, for example, for packaging foodstuffs (baked goods, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. Functions: -Automatic mode / manual operation selectable. The packaging process can be started via several options. Manual via hand button or alternatively foot switch. Automatically by time input of intervals in which the shrink hood automatically lowers. -Automatic product ejection through the outfeed conveyor. -Automatic rewinding of residual foil possible. Settings: CPSW0U08R -Only "welding" or alternatively "welding and subsequent shrinking". -Welding time adjustable. -Shrink temperature adjustable. -Shrinkage time adjustable. -Holding time adjustabl ...

Details Name: Heidelberg GTOV 52 ID PP-36388 Category 4-Colors Manufacturer Heidelberg Model GTOV 52 Year 1984 Color 4 Impression 90 Max. Size 36x52 cm Condition Good Location Europe Availability Immediately Description - Maximum size: 360 x 520 mm. - Minimum size: 105 x 180 mm. - 4/0 - Water-alcohol wetting system - Counter: 90,208,400 - Numbering, perforation, creasing system - Custom closet for numbered system - Horizontal numerators: 6 for addition, 1 for subtraction - Vertical numerators: 4 for addition, 2 for subtraction

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Clamping force: 60 t Year of construction: 2003 Injection unit: .../111 Screw diameter: 18/25 mm Spec. Spray pressure: 2230/2253 bar Clamping unit: 600/... Clamping force:: 60 t Lights spar spacing: 355 x 355 mm Ejector force: 34 kN Aperture travel: 420 mm Max. plate spacing: 620 mm Ejector travel: 110 mm Fuel tank capacity OIL: 190 l www.europnet.eu