We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
127,844 used machines on RESALE, but how to find them? Machine Search
used
used
with chip conveyor, not tested, not checked, with tooling holders for Revolver, no chuck
new
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...
used
Tip width: approx. 900mm, Turning diameter over bed: approx. 400 mm, Turning diameter over support: approx. 250 mm, Including 3 Bach wedge bar chuck Ø250mm, Multifix size 2, Footprint: 2000 x 1100 x height 1350 mm, Includes 6 x machine feet
used
SUB Spindle, LNS Hydrobar feeder, Live tooling, Chip conveyor, Please note the tools in revolver are not included in sale see lot 2. Machine already ready for transport, machine can be viewed on viewing day for correct assessment.
used
Cabinet with 6 drawlers; collets, jaws, measuring arm, WTO driven / tool holders Machine already ready for transport, machine can be viewed on viewing day for correct assessment.
used
Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool ...
used
2003 Mustang 200 CNC lathe Find more here - / Contact us at -
used
Tos SU100H/2000 8 meter universal lathe Maximum turning diameter : 1000 mm Machine is in very good condition
used
CNC lathe Manufacturer: Mazak Model: QT Nexus 200-II M Year: 2008 CNC: Mazak Mazatrol Matrix Nexus
used
Smec SL 2000M CNC Lathe with c axis Machine is like new condition Machine has been used only 4 months Fanuc control unit
used
MAZAK SQR-200 cnc lathe Year 1998 6300kg Ask us for more details
used
The machine is in good technical condition, it is possible to test it by agreement. Accessories: magazine / feeder Robobar SSF 226. Dimensions: 170 x 101 x 200 [cm], weight: 1.5t. Maximum spindle speed: 12,000 [rpm]. Spindle power: 3.7 [kw]
used
Mazak Quick Turn Smart 200M L Cnc Lathe Machine is in good working condition Maximum swing 660 mm Maximum machining diameter 350 mm
used
Mazak Integrex 200 IV CNC Lathe 5+2 axis Simultanously Serviced by Mazak Machine is in good condition
used
Turning center with rotating tools Main spindle chuck size - 8 max. diameter above the bed - 660 mm max. processing diameter - 350 mm max. bar processing diameter - Ø 65 mm max. rotational speed - 5,000 rpm Motor power - 15.0 kW Year of production - 2015 TURRET: Number of tools - 12 AXIS DISPLACEMENT: Displacement (X axis) 195 mm Displacement (Z axis) 560 mm
used
Mazak Integrex i-200 5 axis cnc lathe Machine is in good working condition Bar feeder is included 0,001 accuracy
used
Mazak Integrex 200SY 5 axis cnc lathe Mazatrol Fusion 640 MT control unit Turning diameter : 540 mm Turning length: 1000 mm Tool measuring probe ATC 80 Many tools are included
used
Bought new in Slovakia. FANUC system, tailstock, suction belt, workpiece catcher. It is also possible to buy a 3m rod feeder FEDEK SN-542 (almost unused), which was previously connected to it, we also bought it new.
used
CNC : MATRIX II Maxi turning diam : 350 mm Distance between centers : 500 mm Main spindle chuck diam : 210 mm Spindle bore : 76 mm Stroke X/Z : 30/33 m/min Spindle speed : 5000 rpm Power motor : 26kW Turret : 12 posts Subspindle speed : 6000 rpm Subspindle power : 7.5kW EQUIPMENT : Chip coveyor : Barfeeder : LNS
used
with Y axis excellent condition inspection possible video available
used
Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering ...
used
CNC lathe Manufacturer: Mazak Model: Nexus 200M Equipped with claws and tools
used
Mazak Nexus 200 CNC Lathe 2 axis Machine is in good working condition
used
An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe
used
Goodway GLS 200 CNC Lathe Max turning diameter : 360 mm Max turning length : 500 mm
used
Equipped with SK-kit: - auto toolchanger 8 positions - VDI-type - hydraulic chuck - hydraulic counter-point - hydraulic center Swing over bed: 620 mm Swing over cross-slide: 580 mm Distance centre tot centre: 2000 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 1 > 2500 rpm Command: Fanuc Toolchanger: yes Number of tools: 8 positions
used
Prima Power Platino 4000 x 2000 Laser Cutting Machine 4 kW Machine can be seen in working condition
used
Trumpf Trumatic 2000R CNC Punch machine with low working hour Working hour: 16000 X axis: 1270 mm Y axis : 1270 mm Power in Ton : 18 ton
used
Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014
used
Type: S90/285-155 double chuck lathe! Distance between centers: 2000 mm Swing over bed: 830 mm Swing over cross-slide: 525 mm Diametre of main spindle bore: 155 mm Power on main spindle: 7,5 kW Number of speeds: 12 > 750 rpm Digital screen: yes Length: 3100 mm Width : 1000 mm Height: 1800 mm Weight: 3 ton
used
Nukon Rex 315 - 2000 Watt CNC Laser Cutting Machine 3000 mm x 1500 mm 2000 Watt Machine is in good working condition
used
Ermak 8000 mm x 2000 mm Lase Power : 4 Kw Lantek and 10 set of lenses are included Machine is in good working condition
used
Description Domino M230i T4 The ability to use stroke lengths of 0 – 360 mm and the auto-stop function to interrupt movement when touching an obstacle make the M230i-T4 label dispenser the most versatile and safe labeling system available on the market today. It is immediately available and ready for use Viewing possible at any time If it does not fit, there is always a large number of different labelers in stock. Talk to us and we will find the right one for you.
used
KDA 200 Cone rotator Universal G&-4973-M1768
used
Control unit Style Turning length 2000 mm Turning diameter 560 mm Diameter above x-slide 300 mm Spindle bore 105 mm Turning speed 2500 rpm Motor power 22 kW Weight 5100 kg
used
used
Used croissant line CIM -In bakery condition- - Dough sheeting machine - Cutting station - Winding unit - For unfilled croissants Visits and test runs are possible by arrangement.
used
Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.
used
This Dugard Eagle 200 lathe was manufactured in 2006. Ideal for precision machining, it offers robust performance and reliability. A great opportunity to buy this Dugard Eagle 200 lathe. Contact us for further details.
used
This 6-axis DMG MORI NZX 2000/800 lathe was manufactured in 2021. It features a 3 turret configuration, main and counter spindles both with 10â KITAGAWA chucks at 5,000 rpm, and a milling spindle speed of 6,000 rpm. Notable travels include 210mm on the X-axis and up to 810mm on the Z-axis. With only 1958 cutting hours, the DMG MORI NZX 2000/800 machine we have for sale represents a significant opportunity. Contact us for further details.
used
This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control system, it ensures precision and efficiency. The main spindle supports up to 5000 rpm, while the second spindle reaches 6000 rpm. A great opportunity to buy this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details.
used
Mastiff 1400 Distance between centers: 2000 mm Swing over bed: 535 mm Swing over cross-slide: 368 mm Swing in gap: 810 mm Diametre of main spindle bore: 89 mm Power on main spindle: 9,3 kW Number of speeds: 18 > 1400 rpm Weight: 2,6 ton
used
This MONFORTS KNC6 x 2000 Lathe was manufactured in the year 1994 in Germany. It is equipped with a MONFORT CTK control unit.
used
This Gildemeister CTX 200 S2 was manufactured in 1998. A robust lathe featuring a Heidenhain control, 12-tool turret, and a chip extractor. It boasts a turning diameter of 210mm and a maximum Z travel of 350mm. Includes a 3m IEMCA rod feeder and various tool holders. Ideal for those looking to buy this Gildemeister CTX 200 S2 lathe. Contact us for further details regarding this lathe.
used
This MORI SEIKI CL-200 Lathe was manufactured in the year 1998 in Japan. It is equipped with a MORI SEIKI MSC-803 control unit. The machine has a spindle speed of 3500 rpm.
used
Lifting tipper Kemper HK 200 LD for San Cassiano boiler - Kemper HK 200 LD lifting tipper - for San Cassiano boiler - with boiler cutter - Year of construction 2004
used
This 3-axis Goodway GLS 200 M lathe was manufactured in 2007. It features a FANUC 0i-TC control system, a spindle speed up to 4200 RPM, and a 12-position turret with 6 driven tools. Maximum turning diameter is 280 mm, with a bar capacity of 51 mm. Includes a QUICK LOAD SERVO 65-80 barfeed magazine and a Renishaw probe. A great opportunity to buy this Goodway GLS 200 M lathe. Contact us for further details regarding this lathe.
used
This MAZAK INTEGREX 200 IV S Lathe was manufactured in the year 2007. It is equipped with a Matrix control unit. The machines disposes od a spindle, a counter spindle, a milling spindle and a chip conveyor.
used
This MAZAK INTEGREX J-200 S Lathe was manufactured in the year 2016 in Japan. It is equipped with a Mazatrol Matrix Nexus 2 control unit and has 6 axis. The machine has a spindle speed of 12000 rpm. See original purchase confirmation for more technical details as PDF (German) attached.
maximum number of results exceeded
please refine your search