eurolux 200 l used for sale

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12.5 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 14 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Throughout: Ø 60 mm -Weight: 14.5 kg

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw lining, 3-jaw lining -Feed size: Ø 200 mm -Passage: Ø 56 mm -Rezess: Ø 75 mm, Ø 103 mm -Weight: 17.9 kg

Three-jaw chuck, 3-jaw chuck -Type: OM200-ZJ -Chuck size: O 200 mm -Passage: O 56 mm -Admission thread: M60 x 5.5 mm -Weight: 19.8 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Hole circle: 156 mm -Passage: Ø 54 mm -Weight: 12.7 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Admission recess: Ø 168 mm -Passage: Ø 55 mm -Weight: 12 kg

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -with: base plate -Weight: 26 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm

Modell: PPK STADLER Motor: ELECTRIC Operative Data: W. 6.500 mm x L. 2.500 mm x H. 4.000 mm Hourly Production: 15 t/h N° Paddles: 2x 6 Pz Useful Length: 2.180 mm Power Consumption: 4 kW N° Fractions: 2 Weight: 8.000 Kg Treated Materials: PAPER / CARDBOARD

-extendable Diosna lifting kneader -with 2 stainless steel shells -per kettle for max. 200kg dough or for max. 125kg flour -2 speeds slow and fast -Machine completely repainted -with 2 to 4 boilers to buy

Hubkneter, Fabr. Diosna Type D200 A

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Key data: 380 mm, 280 mm, 130 mm

Vest bezel range 200-380mm incl pins with rollers

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case -Weight: 11 kg

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Used Stork UHT Plant – Model 2000 Reliable UHT processing plant designed for the sterilization and treatment of dairy and plant-based beverages. The Stork Model 2000 offers efficient thermal processing and is suitable for medium-capacity production of UHT products. General Information - Manufacturer: Stork - Model: 2000 - Refurbishment: Completely refurbished in 2015 - Condition: Very good used condition Technical Specifications - Capacity: 1,600 l/h - Control System: Siemens S7 PLC Suitable Products - The plant is designed for processing a wide range of UHT beverages, including: - UHT milk (plain / white) - Chocolate milk - Flavoured milk - Soya UHT drinks Key Advantages - Reliable Stork UHT processing technology - Completely refurbished in 2015 - Suitable for dairy and plant-based beverages - Equipped with Siemens S7 PLC control system - Compact solutio ...

Used fully automatic labeling machine made by KHS Innoket model SE 2000. New 2007. Wet and hot glue labeling capability. Automatic film roll change at each RF station; automatic paper label magazines. Machine speed for RF (hot glue) - max 45,000 butts/hour. Machine speed for paper labels - max 45,000 butts/hr. Machine equipped with 2 stations for paper labels, 2 stations for film labels; 40 plates.

Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough depending on the TA Dough machine with flour dust cover 2 tank cars with tilting device 2 gears, with protection circuit Connection 400V, 32A-CEE plug Machine Many more lifting kneaders in stock!

Stock number: 3919 CNC LATHE Manufacturer: MAZAK, Type: HQR 200 MSY Year of manufacture: 2018 Specifications: Max. circumferential diameter 344 mm dia. Turning length 860 mm Main motor power 22 kw Main spindle speed range 5000 rpm Hole through drawing tube 65 mm dia. C Axles 0.001 Both spindles Y axis upper 100mm / lower 70mm mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Powered tools. 6000 Both Turrets rpm Control Mazak Smooth Fabr. Accessories: Collet device. Heinbuch 65 both spindles Hydr. Chuck main spindle 210 mm dia Hydr. Chuck Subspindle 210 mm dia Driving angle tools 6 pieces Driving Tools Straight 5 pcs. Tool setter Charging Hydrafeed X-Tract Delivery time September 2024 Length: 4000 mm, Height: 2500 mm, Width: 2700 mm, Weight: 12500 kg

Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%):  ...

Fermentolevain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavors Control of the fermentation phase and preservation phase easy-touch control Mixing time and speed can be adjusted Stainless steel Stirring tools removable with overflow probe and alarm buzzer 2 agitators, double lid Floor and side scrapers for more quality Outlet height 535 mm Tank capacity 200/250 kg Cooling capacity per hour approx. 6°C falling DGUV V 3 tested Connection 400V / 50Hz / 3,3kW, 16A-CEE plug Dimensions: 1040 x 1300 x 1810 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle Maintenance contract Service Package Many more bakery machines in stock!

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough/TA 160 (rye mixed bread dough) Stainless steel boiler 300 liters Dough machine with flour dust hood according to HACCP 2 tank cars with tilting device Stainless steel kneading arm with turning mechanism 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 32A-CEE plug Used machine overhauled with 6 months warranty Option: Ground fastening Delivery Maintenance contract E-Box Service Package Many more lifting kneaders in stock!

turning diameter: 800 mm turning length: 2000 mm control: Monfort R&D turning diameter over slide: 520 mm spindle hollow: 88 mm total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: 4,2x2,2x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.