eurolux 200 l used for sale

General SKU244Y171 MakeRiera Nadeu Serial10590/P19/00726 Type200D 800 x 400 PI Main Features MaterialStainless steel Motor11 KW Inlet diameter22 mm Specified Features - Basket centrifuge Basket centrifugecheck Closed basketDuplex 2205 Capacity100 dm³ Basket sizesø 800 x 400 mm Max. loading weight125 kg Hydraulic operatedcheck Liquid outletDN100 With hydraulic unitHydra power Motor1,50 kW, 400 V, 1445 rpm With variable speed drivecheck Max. basket speed2600 rpm Max. temperature0° / 80 °C MaterialStainless steel 1.4404 (316L) Information Year of construction2020 LocationBarneveld Mounted on foundation platecheck With switchgearcheck Floorspace2,60x1,30 m Total height2,00 m Weight3400 kg CEcheck Extra Specifications Maximum centrifuge factor: 3,000 g : Pressure casing: 0 / 40 mbar : Maximum allowable specific weight: 1,250 kg/m³ : Control system: ...

General SKU228Y124 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity275 l. (200 l.) Vessel sizesDia. 900x700 mm Dished bottomcheck Top connectionscheck OutletDN35 With jacketcheck volume 11,75 l. Max. temperature-10/150 With anchor stirrercheck Motor1,5 kW (400 V 1461 rpm) Speed mixing shaft41 rpm With homogenisercheck Motor4,0 kW, (380 V, 2905 rpm) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information MakeNiro Croatia SerialNIC-17-04 TypeCV-201-NR-200 Year of construction2017 Mounted on legscheck With switchgearcheck Floor space1,10x1,10 m Total height1,60 m Weight620 kg Extra SpecificationsWith ball cleaning, con ...

General SKU066A334 MakeHalvor Forberg A/S Larvik Norway TypeFT-200 No.S12-94 Year of construction1994 Mounted on framecheck Main Features MaterialStainless steel Volume200 Ltr. Motor5.5 KW Specified Features - Paddle mixer MaterialStainless steel 1.4301 (304) Paddle mixercheck Double shaftcheck Useful capacity200 Ltr. Trough sizes1000x850x950mm ManholecheckInspection hatch 785x410mm OutletDia. 220 mm Motor5,5 KW, 380/660 Volt Information LocationBarneveld Floorspace 1,7x1,6 m Total heightmixer without filter 2,5m Weight2250kg Extra Specifications- Equipped with Forbergs PMS Pin Mill System = 2 high speed rotating shafts with welded pins - Heat exchanger and fan are missing - With nozzles for liquid injection - :With envelope filters Catalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectioneryPaddle mixersSolid pha ...

General SKU273K305 MakeHaagen & Rinau Mischtechnik Bremen TypeSRC-200 No.8233751 Year of construction1987 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume345 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselVacuum processing vessel (1x) Capacity345 Ltr (useful capacity 50-200 Ltr) Vessel sizesdia. 740x550mm Dished bottomcheck Dished top sidecheck With covercheck With jacket(32,5 Ltr) Max. temperature143/151 Degr. C. (vessel/jacket) With anchor stirrerscraper stirrer (Teflon scrapers missing) Motor5,5 KW, 220/380 Volt Speed mixing shaftvariable With homogenisercheck Motor1,5/6,0 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information Floorspace2,2 x 1,2 M Total height2,9 M Weight1800 KG Extra Specifications- With vacuum pump mak ...

General SKU040Z162 MakeBrogli AG Allschwill TypeMH-2000 No.2931 Year of construction1989 LocationBarneveld Pressure Working pressure0.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2000 Ltr. Motor21 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Open stirring vesselVacuum processing vessel (1x) Capacity2000 Ltr Vessel sizesdia. 1530x1100mm, Vessel WITHOUT jacket Dished bottomcheck Flat top sidewith mechanic lifting (2,2 LW, 380 Volt) With covercheck Outletdia. 90mm With anchor stirrerscraper stirrer Motor8,5/12,0 KW, 380 Volt With homogeniser(± 750/1500 Rpm) Motor18,0/21,0 KW Information With switchgearcheck Floorspace3,8x2,0 M Total height2,9 M Weight7000 KG Extra Specifications- Equipped with 2 spiral stirrers (Helix) -- RECONDITIONED -- Technical specs Extra informationVessel without jacket Pro ...

General SKUR0231 MakeDraiswerke GmbH Mannheim (D) LocationBarneveld TypeT-2000 SM Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor24 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2000 Ltr Trough sizesdia 1200x1950mm Inlet1090x900mm Top connectionsdia 80mm (1x) Inspection hatch550x400mm Outletdia. 300mm With jacket(150 ltr) Max. temperature165 degr. C With adjustable packing glandscheck Glands air purgedcheck Motor16 / 24 kW 380 Volt Ex MaterialStainless steel 1.4541 (321) Information No.51989 Year of construction1985 Floorspace4,4x1,6 M Total height1,5 M Weight5000 Kg Extra Specificationsincluding Bucher filter. filter housing material 1.4301 including 2 filter cartridges (20 filter bags 450x1100 mm) and transport trolley to disassemble the filter cartridges, filter housing size  ...

General SKU316W641 LocationBarneveld CEcheck MakePrestel GmbH Main Features Motor4 KW Length3600 mm Inlet diameter150 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4541 (321) Horizontal conveyor screwcheck Trough-typecheck Length3600 mm Between inlet and outlet2500 mm Shaft diameter90 mm Pitch200 mm Inletø 150 mm Outletø 210 mm Motor4 kW (400 V, 1440 rpm) Screw speed45 rpm With coverscheck Information TypeTRS- 200 H9007/1 Mach.No.KOM132 Year of construction2019 Floorspace3,6 x 0,3 m Total height0,5 m Weight250 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesA ...

General SKU020Y106 MakeDrais Mannheim TypeTurbuMix TM-200E FM1 No.56 008 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Volume200 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-armscheck Capacity200 l. Useful capacity60-148 l. Trough sizesø 600 x 750 mm Inlet275 x 600 mm Inspection hatchø 600 mm Outletø 120 mm Motor7,5 kW 400/690 V Speed mixing shaft± 125 rpm With lump breakercheck Motor7,5 kW 400/690 V Speed lumpbreaker1450 rpm MaterialStainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,5 x 2,1 m Total height2,1 m Weight2500 kgCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder turbo mixersSpicesOther c ...

General SKU236W261 LocationBarneveld MakeHermann Waldner Type4750L No.2140 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4750 Ltr( netto 2000 Ltr) Vessel sizesDia. 1800x2685 mm Conical bottomcheck Manholecheck DN600 Top connectionsDN50, DN40 OutletDN 100 With jacketcheckJacket room 1, volume 45 Ltr, jacket room 2, volume 105 Ltr. Max. temperature165°C. With anchor stirrercheck With scraper With paddle stirrercheck screw stirrer Counter rotating stirrercheck Motor4,4 kW, 380 volt / 7,5 kW, 380 volt Speed mixing shaft50 rpm and 30 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Year of construction1993 Mounted on legscheck With switchgearcheck Floorspace5,0x ...

General SKUR1097 LocationBarneveld MakeDrais Werke GmbH (D) TypeTR-2000 A No.51373 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket5 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor20 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 ltr Trough sizesdia 1200x1700mm Inletdia. 450mm (1x), dia. 200mm (1x) Outletdia. 200mm With jacket(128 ltr) Shaft can be heatedcheck Max. temperature160°C With adjustable packing glandscheck Motor13/20 kW 380 volt MaterialStainless steel Information Year of construction1983 Floorspace5,0x2,0 M Total height2,4 M Weight7500 Kg Extra Specificationseasy clean due to extendable agitator. Including Pergande filter housing type PHFR 4-1500 BH TR, -1/0.5 bar with jacket 5 bar Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectione ...

General SKU305U627 LocationBarneveld CEcheck MakeStarick Fördertechnik GmbH Main Features Motor4 KW Length9520 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter219 mm Length9520 mm Between inlet and outlet7878 mm Shaft diameter133 mm Pitch185 mm InletDN200 OutletDN200 With jacketcheck (cooling) 6000mm long Max. temperature100°C With adjustable packing glandscheck Motor4kW, 400/690 Volt, 1452rpm Screw speed12/25 rpm Information TypeRFS-200/SoK Mach.No.1821.2694.01.05 Year of construction2005 Floorspace9.0x0,5 m Total height0,5 m Weight900 kg ATEX compatiblecheck Extra Specificationswith new motor and gearboxCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additive ...

General SKU235U235 MakeIlchmann TypeDTSF 2x200x6.525 Mach.No.CRO 0348 Year of construction2014 Main Features Motor3 KW Length6525 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter200 mm (2x) Length6525 mm Between inlet and outlet5880 mm Shaft diameter108 mm (x) Pitch200 mm Inlet630x350 mm Outlet350x350 mm Max. temperature90 °C With adjustable packing glandscheck Motor3 kW, 220-230 volt / 380-400 volt, 1456 rpm Screw speed31 rpm With coverscheck Information LocationBarneveld Floorspace8,3x5,1 m Total height0,49 m Weight1250 kg CEcheck Extra SpecificationsCapacity: max. 5 m³/hCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubrica ...

General SKU050Y334 MakeNetzsch Mastermix Aldridge TypePMD-200 Year of construction1992 Mounted on legscheck Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1230 Ltr. Motor55 KW Specified Features - Stirring vessel Closed stirring vesselPolymer Preparation Mixer (1x) Capacity1230 Ltr Vessel sizesdia. 1130x1250mm, Flat bottom Dished top sidecheck Manholedia. 300mm Top connections(6x) Outletdia. 85mm With jacket(150 Ltr) Max. temperaturejacket 95 Degr. C, Vessel 125 Degr. C. With anchor stirrerscraper stirrer Motor17,5 KW, 380 Volt (Ex) Speed mixing shaft15 Rpm With homogeniserHigh speed disperser hydraulic driven Motorhydraulic drive unit 55,0 KW, 380 Volt (Ex) MaterialStainless steel 1.4301 (304) Information LocationBarneveld ATEX compatiblecheck Extra Specifications- High spee ...

General SKU014F047 MakeMixaco Maschinenbau Neuenrade TypeCM-2000 D No.22.856 Year of construction1993 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Motor90 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity1600 Ltr, Useful capacity 800 Ltr Vessel sizesdia. 1500x750mm (brand new OEM vessel) With cover(jacketed) Outletdia. 300mm With motor90 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace3,2x1,8 M Total height3,0 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Technical specs Extra informationbrand new oem vessel DiscountReconditionedCold mixersMixacoDiscountReconditionedPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

General SKU048W209 MakeWestfalia TypeSAK-20036 No.1643130 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor30 KW Specified Features - Separator Separator(1x) Motor30,0 KW, 380 Volt Max. rotor speed4500 Rpm MaterialStainless steel Information Floorspace1,8x1,5 M Total height1,5 M Weight2000 KGDiscountSeparatorsWestfaliaDiscountCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU268K300 LocationBarneveld MakeGlatt Inox AG Process Technology TypeIST-2000 No.100117 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor75 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 l Trough sizesø 1350 x 1500mm InletDN300 Outlet300 x 220mm With jacketcheck 87+93+15 l Shaft can be heatedcheck Heating surface total 12 m² Max. temperature-20/160°C With mechanical sealcheck Motorhydr. unit 75,0 + 45,0 KW, 400/690 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Year of construction2001 Floorspace4,6 x 2,2 m Total height6,0 m Weight12.000 kg ATEX compatiblecheck Technical specs Extra informationincluding Brüdenfilter 3m2Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal ...

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader MaterialStainless steel 1.4301 (304) Single screw cont. kneaderContinuous dough preparation line (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck Information LocationBarneveld With switchgearcheck Floorspace3,0x2,4 M Total height5,6 MDiscountKneadersAML StroudDiscountKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

General SKUR0880 MakeApaco AG (CH) LocationBarneveld TypeAW300-2000/20-98 Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface12 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface12 m2 Tube capacity95 ltr. Max. temperature165 degr.C. Shell capacity110 ltr. Shell diameter323,9mm Shell length2700mm Wall thickness shell3,2mm Max. temperature100 degr.C. Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 (1x) Information No.503531/1 Year of construction1985 Floorspace0,7x0,7 M Total height2,8 M Weight350 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceutics ...

Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included

A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible.

: gebraucht : 2016 : 9737 : prompt, Zwischenverkauf v : 9800 € : 1 : 8330 € : 2025 mm : 3 mm : 500 mm : 4 kW : 2500 mm : 1720 mm : 1200 mm : 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26025 Technical data: - Sanding belt dimensions approx. 200 x 1800 mm - Roll diameter 150 mm - Sanding belt speeds approx. 5 / 10 / 20 / 30 m/sec. - Speed xxxx rpm - Drive 400 V / 2.2 kW - Sanding belt fine adjustment - Sanding belt position horizontally + vertically infinitely adjustable - Working height approx. 1000 mm - Sliding support - Space requirement approx. W 800 x H 1050 / 1800 x D 1200 mm - Weight approx. 300 kg

Machine Overview Machine Type: Used Multi-Tasking Machine (Turn-Mill Center) Manufacturer: MAZAK Model: INTEGREX 200-III S (IG 200S III) Year of Manufacture: 2004 Control System: Mazatrol PC FUSION CNC 640MT Pro Working Area & Capacity Max. Swing / Turning Diameter: 660 mm Max. Turning Diameter over Carriage: 500 – 660 mm Max. Bar Work Capacity: 51 mm Max. Workpiece Weight: 100 kg (Chucked) / 150 kg (Shaft) Travels (X / Z / Y / W): 580 / 1045 / ±80 / 1050 mm B-Axis Swivel Range: -30° to +195° (0.0001° positioning) Spindle Specifications Main Spindle: 22 kW, 35 – 5,000 rpm, 349 Nm torque Second Spindle: 18.5 kW, 35 – 5,000 rpm, 326 Nm torque C-Axis Indexing: 0.0001° (Both spindles) Chuck Diameter: 210 mm (Main & Second spindle, Kitagawa B-208) Milling Spindle & Tooling Milling Power: 15 kW Milling Speed: 15 – 12,000 rpm Tool Magazine: 80-station (Drum typ ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 € : 553.9 € : 2050 mm : 4 mm : 42 1/min : 750 mm : 7.5 kW : 800 mm : 450 mm : 2700 mm : 2300 mm : 1350 mm : 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 € : 1043.28 € : 200 to : 500 mm : 1000x600 mm : 640 mm : 21 mm/s : 2 mm/s : 5.5 kW : 1800 mm : 1300 mm : 2500 mm : 6400 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:65 mm turning length:120 mm control:Index C200-4D SL z-axis main spindle travel:390 mm z-axis subspindle travel:390 mm x-axis subspindle travel:600 mm Travel Y1:± 80 mm Travel y2:± 80 mm x-axis rapids:45 m/min y-axis rapids:15 m/min z-axis rapid travel:45 m/min Spindle 1 RPM:5000 1/min Spindle 1 Power:35,5/27,5 kW Spindle 1 Torque:170 /125 Nm Spindle 2 RPM:5000 1/min Spindle 2 power:35,5/27,5 kW Spindle 2 torque:170/125 Nm c-axis:0,00014 ° bar material dia.:65 mm spindle nose:AD 140 spindle bore:85 mm Milling spindle 1 RPM:18000 1/min Milling spindle 1 power:11 kW Milling Spindle1 torque:19 Nm Milling spindle 2 RPM:18000 1/min Milling Spindle 2 power:11 kW Milling spindle 2 torque:19 Nm B-axes swivel angle:230 ° B-axes torque:440 Nm B-axes angle resolution:0,001 ° Milling spindle 1 & 2 tool magazine:80 HSK A40 Milling spindle 2 tool magazine static tools :6 x VDI 25 ...

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

workpiece diameter:26 mm swing diameter:- mm workpiece length:66 mm total power requirement:12 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm

max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required.

grinding length:1370 mm grinding width:560 mm workpiece height:800 mm total power requirement:50 kW dimensions of the machine ca.:9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

sanding belt length:max. 470 mm workpiece dia.:600 mm table - swivable:0 - 6 Grad taper:Reitstock Morse 2 turning speed range::1260 - 3100 U/min table movement:längs 470 mm tool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kW weight of the machine ca.:950 kg dimensions of the machine ca.:1100 x 1100 x 1500 mm Documents:vorhanden

internal diameter:315 mm grinding depth:315 mm swing diameter:420 mm number of spindle speeds:32 - 360 U-min wheel box:-drehzahl 100 - 8000 U/min face diameter:500 mm total power requirement:12 kW weight of the machine ca.:5900 kg dimensions of the machine ca.:3400 x 1750 x 2000 mm

x-travel:2000 mm y-travel:1500 mm z-travel:1460 mm milling spindle motor:35/30 kW spindle taper ISO:50 spindle turning speed range:24 - 3000 U/min table surface area:1350 x 1550 mm table load:6 t feed speeds:10 - 3000 mm/min rapid speed:10 m/min total power requirement:48 kW weight of the machine ca.:24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

pressure:250 t distance between columns:1125 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1100 x 900 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:100 mm die cushion area:700 x 400 mm table height over floor:960 mm side window:700 mm ram surface:1080 x 900 mm oil volume:1000 l power requirement:35,0 kW weight:23,0 t Dimensions (WxDxH):2,5 x 2,3 x 4,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick foundation pit:not necessary

pressure:2000 t distance between columns:975 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1015 x 1050 mm table height over floor:800 mm capacity of ejector in table:6,3 t ejector stroke in table:100 mm capacity of ejector in ram:65 t ejector stroke in ram:100 mm ram surface:975 x 1050 mm return capacity:150 t speed down:235 mm/s speed up:250 mm/s working speed:5 - 20 mm/s oil volume:4000 l height over floor:3,65 m height beneath floor:3,75 m power requirement:194,0 kW weight:105,0 t dimensions (WxDxH):5,0 x 6,5 x 7,4 m

pressure:200 t distance between columns:1050 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:1000 x 1200 mm table height over floor:850 mm side window:500 mm ram surface:1050 x 870 mm speed down:300 mm/s speed up:300 mm/s working speed:18 - 36 mm/s power requirement:37,0 kW weight:16,0 t dimensions (WxDxH):4,0 x 3,6 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch cutting impact cushioning:hydraulisch foundation pit:nicht erforderlich

Pressure:200 t distance between columns:1910 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1900 x 1150 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:300 mm die cushion area:1500 x 950 mm table height over floor:800 mm side window:1000 mm ram surface:1900 x 1100 mm return capacity:36 t speed down:400 mm/s speed up:170 mm/s working speed:30,5 mm/s oil volume:1500 l height over floor:4,85 m height beneath floor:2,6 m power requirement:45,0 kW weight:38,0 t dimensions (WxDxH):3,05 x 2,8 x 5,55 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

material width:500 mm coil weight:2 x 2,0 t material thickness:1,0 - 6,0 mm coil internal diameter:350 - 420 mm coil external diameter:1600 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 speed:0 - 40 m/min material thickness at 500 mm material width:3,5 mm power requirement:17,5 kW Dimensions (WxDxH):2,3 x 4,2 x 2,4 m straightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

pressure:200 t distance between columns:1100 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:250 mm die cushion area:800 x 750 mm table height over floor:800 mm ram surface:1000 x 1000 mm Speed down:400 mm/s speed up:250 mm/s working speed:22 - 56 mm/s power requirement:45,0 kW weight:24,0 t dimensions (WxDxH):2,4 x 1,5 x 5,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000