128,233 used machines on RESALE, but how to find them? Machine Search
roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360 ...
Offer 25221 Specifications: - Load capacity 2000 kg - Projection approx. 3000 mm - Swivel radius approx. 180 ° - 2 lifting speeds approx. 3.0 + 0.75 m/min - Hackenweg approx. 3000 mm - Operation of the chain hoist via hand remote switch - Manual swivelling of the boom + trolley movement - Boom IPE 300 - Overall height with swivel arm carrier approx. 1220 mm - Connection 400 V - Weight approx. 500 kg - Test book
used
Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible.
Birth Smoking Machine Specifications: Table size600 x 320 mm Borehole depth205 mm Drill hole length250 mm Height adjustment165 mm Engine speed 2840 rpm Weight180 kg
Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.
Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.
Key data: 2100 KG, 19540 mm, 8200 mm
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 19,540 mm Number of fields per row of shelves: 07 pcs á 2,700 mm Number of levels plus ground level: 04 pcs. Technical data on the volume: Pallet spaces per field: 15 pcs. Pallet spaces per row of racks: 105 pcs. Total pallet spaces: 105 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 700 kg The scope of delivery includes: 08x Pallet rack stand, used Material color: blue Profile dimensions: U 80 x 60 x 3.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) 8,200 mm high 1,050 mm deep 56x Pallet rack crossbar, used Material ...
Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Delta Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 16,760 mm Number of fields per row of shelves: 06 pcs á 2,700 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 54 pcs. Total pallet spaces: 54 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 700 kg The scope of delivery includes: 07x Pallet rack stand, used Material color: blue Profile dimensions: U 80 x 60 x 3.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) 3,200 mm high 1,050 mm deep ...
Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...
Manufacturer: Lundberg Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8") transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - / Contact us at -
Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...
Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 Description Tank topstock: Manhol ...
General SKU366W1280 MakeQVF Glasstechnik No.B19.. LocationBarneveld Main Features MaterialGlass Volume200 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity200 l. Vessel sizesdia. 500x1300mm Dished topcheck Dished bottomcheck Top connectionscheck Outletcheck MaterialBorosilicate Glass 3.3 With jacketcheck General Floorspace0,50x0,50 m Total height1,50 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU366W1267 MakeQVF Glasstechnik No.B15.33 LocationBarneveld Main Features MaterialGlass Volume200 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity200 l. Vessel sizesdia. 400x1400 mm Dished topcheck Dished bottomcheck OutletDN40 MaterialBorosilicate Glass 3.3 With jacketcheck General Floorspace0,45x0,45 m Total height2,0 m Extra SpecificationsWith Vega temperature sensorVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU209W102 LocationBarneveld MakeDiessel Specified Features - Pressure vessel Material finishPolished inside With jacketcheck Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity250 Ltr, (netto 200 Ltr) Vessel sizesDia.644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outlet25 mm Max. temperature150°C MaterialStainless steel 1.4435 (316L) General No.96 18 2308 Year of construction1996 Mounted on legswheels Floorspace0,80X0,90 m Total height1,72 m Weight190 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...
General SKU209W098 MakeDiessel LocationBarneveld Specified Features - Pressure vessel Material finishPolished inside With jacketcheck Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity250 Ltr, (netto 200 Ltr) Vessel sizesDia.644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outlet25 mm Max. temperature150°C MaterialStainless steel 1.4435 (316L) General No.96 18 2305 Year of construction1996 Mounted on legswheels Floorspace0,80x0,85 m Total height1,72 m Weight190 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...
General SKU209W124 MakeHaagen &: Rinau LocationBarneveld Typeunimix Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitybruto 260 Ltr. ( netto 200 Ltr.) Vessel sizesDia. 600x1057 mm Dished bottomcheck Dished top sidecheck ManholeDia. 600 mm Top connectionscheck Outletbottom flange DN40 Half coil jacketedVolume 28 Ltr. Max. temperature151°C With turbo stirrermagnetic ( agitator is missing) Motor0,18 kW, 220-240 volt, 380-420 volt, 1370 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) General No.301014/1 Year of construction1998 Mounted on legscheck Floorspace1,05x0,90 m Total height1,90 m Weight430 kg Extra Specifications- bottom agitator is missing.With spra ...
Properties: Volume 5200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3800 mm Height 2980 mm Diameter width 2550 mm Weight 500 kg Surface inside IIID Surface outside IIID marbled Description: Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable
ID3646 Liedlbauer Bullcon 2001 year/Baujahr 2000 approx. 2.570 hours/hours 13 t Mobile impact crusher on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been refurbished and serviced, ready for use, optionally 2 pallets of wear and spare parts available Mobile impact mill on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been prepared and after-sales service has been carried out, condition ready for use, optional 2 pallets of wear and spare parts available
Dimensions (L/W/H): 1160x750x1080 mm Weight: 260 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nipper - Double action hydraulic nipping press workingwidth: 420 mm up to 6.000 kg pressure refurbished and we will install a new pump after order
Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Features: Volume 11200 L Material V2A (AISI 304) 1.4301 Manufacturer: Rieger Cubic design Number of feet 4 Total height 2500 mm Length 5250 mm Width 1450 mm Surface marbled on the outside Surface inside IIID Last Use Food Description Topsoil: Flat bottom 1 reinforcement profile in the middle 4 crane eyes Airlock DN50 Cylinder: 4 cool pockets on the side Level indicator with bar and scale Manhole oval Tasting tap Nozzle Flap Size 37 Ladder hooks Sewage drain DN50 with angled seat valve Underbody: Flat bottom with 3% slope forward-drawn outlet surround with disc valve DN50 4 profile feet with domes – height-adjustable 4 reinforcement profiles
Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...
Features Volume 60200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7700 mm Height 5330 mm Diameter width 3500 mm Weight 3500 kg Surface inside 2B=IIIC ground Surface on the outside semi-marbled Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 to DN 40 Sprinkler ring Vent nozzle DN 50 (airlock) Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 350x450 mm Sample tap DN 15 Ladder hook at the top Dip Shank Sleeve DN 15 for Temperature Display Downward-swept CIP cable with vent cable DN 40, with connection thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn curved surround with angled seat valve DN 50 - outlet pipe DN 100 reduced to DN 50 with flange ...
2 Kuka for floor mounting, payload 150kg, weight approx. 1280kg 1x Type KR150 L110-2 2000 1x Type KR150 L130-2 2000
Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
This 600 Lathes Multiturn 2000 was manufactured in 2004. A robust horizontal turning machine featuring a turning diameter above bed of 400 mm, and a length of 1250 mm. It operates at a spindle speed of 2700 rpm with an 8-position turret. Tailstock taper is Morse 5. If you are looking to get high quality turning capabilities consider the 600 Lathes Multiturn 2000 machine we have for sale. Contact us for more information.
A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame. ...
General SKU209W101 MakeDiessel LocationBarneveld Specified Features - Pressure vessel Material finishPolished inside With jacketcheck Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity250 Ltr, (netto 200 Ltr) Vessel sizesDia.644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outlet25 mm Max. temperature150°C MaterialStainless steel 1.4435 (316L) General No.96 18 2301 Year of construction1996 Mounted on legswheels Floorspace0,80x0,90 m Total height1,72 m Weight180 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...
General SKU330W719 LocationBarneveld Main Features MaterialStainless steel Volume200 Ltr. Motor0.75 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity200 ltr Vessel sizes⌀ 640 x 630 mm Dished bottomcheck Dished top sidecheck With covercheck With propellor stirrercheck Motor0.75 kW, 230 V, 1390 rpm, (Ex) Speed mixing shaft258/1807 rpm MaterialStainless steel 1.4552 With jacketcheck General MakeMirap Mounted on legscheck With switchcheck Floorspace1.00 x 0.80 m Total height1.80 m Weight160 kg ATEX designedcheckStirring vesselsMirapStirring vessels > Stirring vesselsBrand > Mirap What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...
General SKU209W126 MakeHaagen &: Rinau LocationBarneveld Typeunimix Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitybruto 260 Ltr. ( netto 200 Ltr.) Vessel sizesDia. 600x1057 mm Dished bottomcheck Dished top sidecheck ManholeDia. 600 mm Top connectionsDN100, DN25(2x) OutletDN40 Half coil jacketed28 ltr Max. temperature151°C With propellor stirrermagnetic stirer Motor0,18 kW, 230-400V, 1370 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General No.301017/1 Year of construction1998 Mounted on legscheck Floorspace1,1 x 0,8 m Total height1,9 m Weight430 kg Extra SpecificationsWith spray ball, pressure meter, flow valvesStainless Steel ReactorsHaagen & Rina ...
General SKU279M286 LocationBarneveld Main Features MaterialStainless steel Volume2000 Ltr. Motor3.6 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity2000 Ltr Vessel sizesdia. 1400x1200mm Conical bottomcheck Dished top sidecheck Manholedia. 300mm Top connections9x Outlet80mm With jacket(bottom) With paddle stirrercheck Motor3,6 KW, 220/380 Volt (Ex) MaterialStainless steel With jacketcheck General MakeACOMETI Floorspace1,6x1,6 M Total height3,5 M Weight1300 KG ATEX designedcheckStirring vesselsAcometiStirring vessels > Stirring vesselsBrand > Acometi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU382X962 MakePharmatech LocationBarneveld Type2000 L. Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Tumbler mixer Double cone tumbler mixercheck Capacity924 kg Diameter1562 mm Length/Depth1884 mm Cylindrical length465 mm Conical length880 mm and 539 mm InletDia. 560 mm OutletDia. 250 mm With motor7,5 kW, 400 volt, 1360 rpm Speed mixervariable – range 2 - 18 rpm With safety gatessafety laser scanner MaterialStainless steel 1.4401 (316) With jacketcheck General No.E10866 Year of construction2017 With switchgear(as is) Floorspace3,50x1,86 m Total height3,41 m Weight1000 kg Extra SpecificationsThis tumble mixer was installed in its original configuration with multiple accessories.- Pharmatech floor scale, SKU: 382X960- Pharmatech Hoist, SKU 382X963Tumbler mixersPharmatechMixers > Tumbler mixersBrand > Pharmat ...
General SKU224T211 MakeErnst Möschle (DE) No.91 217 Year of construction1991 Mounted on legscheck Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume2000 Ltr. Pressure5 Bar Specified Features - Pressure vessel Capacity2000 Ltr. Vessel sizesdia. 1500x2200 Dished topcheck Dished bottomcheck Manholecheck Top connectionsdia. 50 mm (2x), dia. 80 mm, dia. 60 mm Outletdia. 50 mm, dia. 60 mm MaterialStainless steel 1.4404, Stainless steel 1.4571 (316Ti) With jacketcheck General LocationBarneveld Floorspace1,7x1,7 m Total height3 m Weight350 kg Extra SpecificationsWith CIP-nozzlesPressure vesselsMoeschleTanks > Pressure vesselsBrand > Moeschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...
Key data: 1350 mm, 3 , 120 mm
Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.
Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.
9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm
Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton
Used Netzsch pearl mill type LME 200.The mill has a cooling jacket. Year of construction 1989.
Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Support roller: Support wheel from Logitrans SGL 2000V pallet stacker -Wheel size: Ø 170 mm -Quantity: 1x support roller available -Price: per piece -Dimensions: 240/155/H275 mm -Weight: 14 kg
Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1095mm -Cross section: 200 x 60 mm -Recording: see sketch in the photos -Transport dimensions: 1300/900/H200 mm -Total weight: 250 kg
thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: FAG, single-acting light alloy cylinder with spring return, stroke 210 mm -Type designation: LZM 25/200 PN500 8607 -Stamp diameter: 63 mm -Lifting capacity: 25 t -Pressure range: max. 500 bar -Dimensions: 140/110/H365 mm -Weight: 12 kg
LEICA DM 2000 Microscope (DM2000) - 3 Objectives Model: DM2000 Binocular Head Adjustable eyepieces HC PLAN s 10x/22 3 objectives: Plane 10x/0.22 Infinity / - / B Plane 40x/0.65 Infinity/0.17/D 100x Plan/1.25 Infinite Oil / 0.17 12V Lamp - Max 30W Average condition Power cord
Height=1.7 m, Overall length= 1.65 m, Overall width= 1.85 m, Net weight= 1530 kg,
maximum number of results exceeded
please refine your search
