eurolux 200 l used for sale

A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible.

Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible.

A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible.

Manufacturer: HK-CON Model: L2SDZ-6 SUS-090 Type of Machine : Lathe Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Gildemeister Model: GMX 300 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

This 4-axis LASAG KLS 246 CL60 was manufactured in 2008, a laser welding machine with enclosed class 4 safety cabin and camera window. It features a linear-motor XY table (X 400 mm, Y 100 mm), Z travel 300 mm, and a direct-drive rotary table for precision handling. L2-CNC control with SERCOS and a 15-inch touchscreen, plus dedicated water chiller included. Consider the opportunity to buy this LASAG KLS 246 CL60 Laser Welding Machine. Contact us for more information.

Leerflascheninspektor HEUFT mit Dokumentation und Backup CD-ROM

For self Adhesive  Labels and Wet Glue Format Parts for Bottle Size 0.375l , 0,75l , 2.0l

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Manufacturer: Trumpf Model: Trumatic L3030 Type: TC L3030 Laser type: CO2 Laser power: 4,000 W Year of manufacture: 1999 Electrical and Utility Data - Mains supply: 400 V / 50 Hz - Connected load: 88 kVA - Control voltage: 24 V - Compressed air: 6 bar Condition and Availability The machine was in continuous production use until November 2025 and remains powered on.The resonator has been replaced once during its service life. Find more here - .ucymachines/ Contact us at - sales@ucymachines

The SHANTUI LE60 is a used, fully electric wheel loader suitable for heavy construction tasks, with a robust operational weight of 20 tons. It is powered by a 357 kWh lithium-ion battery, featuring liquid cooling and rated at 537.6 V / 664 Ah. This allows for up to 6–10 hours of usage, with a charge time from 20% to 95% taking approximately 1.25 hours when using a 240 kW charger. Equipped with a 100 kW driving motor capable of a maximum of 200 kW and an 80 kW working motor that peaks at 160 kW, this loader offers impressive torque for demanding tasks. The transmission is an electronically controlled gear system, supported by self-locking differential axles. With a maximum speed of 38 km/h, it efficiently handles operational demands, boasting a lift capacity of 6,000 kg. The hydraulics system delivers a flow rate of 112 l/min, ensuring fast and reliable performance with full cycle times ...

Manufacturer: Fraunhofer Model: HEIS Laser 1 Year of manufacture: 2023 Status: Fully operational CE certified: Yes Technical Specifications - Supply voltage: 3 x 400 VAC / 50 Hz - Fuse protection: 3 x 50 A - Rated current: 50 A - Laser wavelength: 9 to 12 micrometers - Laser average rated power: 450 W Hardware Components Included - Beckhoff control PC - Philips monitor - Laser source OEM 45 IX - Water-air cooler and cooling water system - Scanner IntelliSCAN 20 with VarioSCAN 40 - Beam guidance system - Air conditioning system - Cooling water system - Control panel Peripheral Equipment Included - ULT extraction and filter unit - Riedel Kooling chiller unit, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturers and Models: - Tima Tec - Varioroll Type 418 - PLEVA - RF110-AF120 - Erhardt + Leimer - CN 4007 - Menzel - S104413 Technical Data - Working width: 3,300 mm - Years of Manufacture: 1999 to 2005 Line Components - Unwinder - Dancer with sliding plate storage - Surface smoother - Microwave sensor - Metal detector - 4 coating chambers - Inspection stand - Winder Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine 1 Elopak Carton Filling Machine - Manufacturer: Elopak - Machine type: carton filling machine - Control system: Siemens Simatic Panel PC - Configuration: Dual lane (Line 1 and Line 2) - Total carton counter (machine lifetime): over 461 million cartons - Condition: Used, currently installed and in production - Total picker counter (lifetime): 462,280,647 cartons - Total outfeed counter (lifetime): 461,210,559 cartons Machine 2 Meurer MTP 25-B 400 Tray and Wrap-Around Case Packer - Manufacturer: Meurer - Model: MTP 25-B 400 - Year of manufacture: 2011 - Main motor operating hours: 68,742 - Air supply: 6 bar - Speed: up to 25 cycles per minute - Formats: simple trays, wrap-around cases, two-piece lid and base configurations - Included: Meler Micron+ TO hot melt glue unit - Control: touch screen operator panel - CE marked, made in Germany Find more here - .ucymachines/ Contact u ...

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 874 mm   space requirements -front/back-: 1250 mm   total height: 1570 mm   total weight approx.: 360 kg Software update 2009

Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible.

Long rolling station Lippelt 800 Year of manufacture: 2018 Working width: 800 mm Pressure roller in the inlet adjustable in height and side Knitted board, adjustable With indexing roller on transfer belt (pneumatic) Flour shaker with electrically adjustable flour quantity incl. 2 containers Pressure roller on the spout, height and side adjustable Belt speed adjustable Machine can work in stand-alone operation

Pastries and croissants Rondo TOP LINE Suitable for the production of filled and unfilled croissants, puff pastry products such as cinnamon rolls and other stuffed baked goods. Available now! Laminating line (YOC: 2005) consisting of: Dough hopper/pre-portioner Dough Sheet Former Grease pump (year of manufacture: 2007) Conveyor belt with folding belts Satellite Head 1 Folding station Satellite Head 2 Cross roller Calibration Roller Transfer wristbands to the croissant section Conveyor belt with cutting rollers and spraying station Pneumatic 6 Piston Filler Guillotine Depositing device for sheet metal Incl.

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

We offer a LIDA capper for crown caps: semi-automatic 1 head Capacity: 1000 bottles/hour Bottles: 0.33 - 0.7 L Power connection / installed power 230/50Hz / 0.12 kW Air pressure: 6 bar Dimensions: Length: 500 mm Width: 500 mm Height: 2,000 mm Weight: 120 kg

Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, ...

Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.

BLS Lamination Press has been rebuilt to meet your lamination needs. Specifications: Tonnage: 20 Ton Max Temperature: 150°C Electric Heated Platen Table Size: 600 mm x 600 mm Daylight: 425 mm Open/Closing Speed: 10 mm/s Omron PLC HPU

This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It features a powerful TruFlow 3200 CO2 laser with a laser power of 3200 W, making it suitable for various cutting applications. The machine has been utilized for 82,247 working hours, ensuring reliability and performance. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 L20 machine we have for sale. Contact us for further details.

Very robust and very well preserved complete round timber feed make LINCK. Built in 2011. Feed deck 5 chain conveyors, step slider with 4 steps. Wood length max. 5.2 m. Suitable for medium-thick round timber. Stable side walls, including steel substructure. The system is still assembled at the original location.

Manufacturer: Adige Model: Lasertube LT722D Technical Details: - Laser Source: Rofin Sinar DC25 - Laser Power: 40 kVA apparent power - Minimum Bar Length: 3200 mm - Maximum Bar Length: 6500 mm - Max Bar Weight (L=6500): 100 kg - Max Bar Weight (L=8500): 130 kg - Round Section Diameter: 12 to 140 mm - Round Section Optional: 12 to 152.5 mm - Square Section Side: 12 to 120 mm - Max Circumscribed Circle: 170 mm - Minimum Side Dimension: 10 mm - Maximum Side Dimension: 140 mm - Max Side Dimension Optional: 150 mm - Max Load Saddle Capacity: 4000 kg - Power Voltage: 400 V +/- 10% - Frequency: 50 Hz - Type of Power: Three phase without neutral - Total Machine Power: 26 kVA - Enclosure Protection: IP54 - Hydraulic Reservoir Capacity: 25 l - Hydraulic Pressure: 70 bar - Pneumatic Pressure: 6 bar - Pneumatic Capacity: > 500 Nl/min - Weight L=6500 version: 9000 daN - Weight L=8500 version: 1000 ...

WACO - LECAB - WoodEye high speed planing-cutting-bundling line, Feed speed up to 200 m/min, - Lecab - Kallfass automatic de-stacking and infeed, - Waco Twin-resaw line, type BKW, - Lecab - Kallfass resaw outfeed and infeed planer, - Waco planer, type Maxi - 11 spindles, - WoodEye scanner system, - Lecab outfeed with bundling systems 1+2+3, - Outfeed 1 and 2 with integrated cross cut system, - Outfeed 1 - 3 with Fischer foil wrapping + Logopack labeling + automatic stacker, - Lecab outfeed system for wood packages, Full line in mint condition

7 pieces telescopic belt conveyor, MAXX REACH, 27m total length - used - : Price per piece ex location: only 18.950.-€ (net), incl. loading! Price when buying 3 pieces: only 16.950.-€ / piece (net) ex location! Price for complete acceptance: only 15.950.-€ / piece (net) ex location! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of Make: 2019 Serial number: e.g. W190103-02-03 According to the manufacturer, up to approx. 27m total length extended Length retracted: 8.80m I.e. the device extends about 18m! Body width: approx. 1.20m Total width approx. 1.53m plus motor on the side approx. 20cm 3-fold telescope Ideal for unloading trailers – the device can then also be located about 5 – 6m away from the unloading gate, i.e. a forklift can still drive in front of it when retracted, etc.! Height: approx. 1.22m Total weight: 6. ...

QTY. 1 SECOND-HAND PASTA / NOODLE PRODUCTION LINE – FOR SHORT AND LONG PASTA Mfct.: Macri (Italy), Braibanti (Italy); Capacity: approx. 260 kg/h; Built: 1990 & 2000, Status: still on foundation, stopped in 2022 General description: The pasta factory currently works with 2 x 160 Kg/h presses, one for long pasta and one for short pasta. The drying capacity of each dryer is +/- 500 kg. To fill them all it takes +/- 15/16 hours, i.e. two work shifts. Required area: 805 sqm., approximately L x W x H = 35 m x 23 m x 7 m

ALPHA LASER ALM 300 laser welding machine was built in 2019 in Germany by ALPHA LASER GmbH. The machine is used for the precision welding of workpieces that require high accuracy, i.e. moulds, dies, tools and machine parts. The process involves spot fusing of the material by means of a concentrated laser beam with high energy density. This solution makes it possible to obtain highly accurate and robust welds with reduced thermal distortion at the same time. ALPHA LASER ALM 300 is equipped with a movable work head, which enables convenient operation even in hard-to-reach areas of the workpiece. The operator controls its position in the X,Y,Z axis by means of a joystick located on the machine arm. The welding process parameters are entered from the membrane keyboard panel or by means of a multifunctional foot switch control. The ALPHA LASER ALM laser beam welding machine weighs approxim ...

This Hüttenhölscher Body Press was manufactured in 2000. Ideal for efficient carcase pressing applications, it represents a reliable choice for your production needs. Contact us for more information.

This TRUMPF Trumatic L6050 was manufactured in 2006. A robust laser cutting machine featuring a SIEMENS SINUMERIK 840D controller, it handles a maximum workpiece weight of 1.900 kg. It efficiently cuts through mild steel up to 20 mm, stainless steel up to 15 mm, and aluminium up to 10 mm. Ideal for large-scale operations with a working area of 6.000 x 2.000 mm. For more information about this laser cutting machine, please reach out to us.

This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.

This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine.

This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details.

CNC Laser Cutting Machine - Fiber Laser 9 kW Amada LCG 3015 AJ M2 + ASLUL Twin Year of manufacture 2018 AMNC 3i CNC Control Laser source AJ 9000 (9 kW) Travels: X 3,070 mm Y 1,550 mm Z 100 mm Axis speeds X,Y,Z 120/80 m/min. Cutting feeds 0 - 60 m/min. Z-Axis Sensor HS 2013 Loading/unloading storage towers ASLUL TWIN 16-fold nozzle changer Equipped with: Clean cut (Hochwertiger Schnitt) NC Focus Control Lens 190 mm Oil Shot Barcode Reader WACS Automatic scrap conveyor 16-fold nozzle changer Storage and transport system ASLUL TWIN (loading/unloading) Very good condition Offer number V-7157

A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripher ...

sliding headstock CNC lathe, year 2019, 7000 operating hours. Used machine. More info & price on IndustrialBuyer.

WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access

LMG 4-shaft moulder Leadermac Smart MA 423 mod. Used LMC-423S workable capacity width mm. 15-230 workable capacity height mm. 10-150 minimum length of single piece mm. 200 Shaft rotation speed 6000 rpm Electronically controlled 2-axis positioning Automatic engine start current consumption A 52.5 Engine power: 1st engine 7.5 HP 2nd/3rd HP 10 motor 4th HP 10 engine HP 4 drive variator with cardan drive Weight kg. 2200 Year of manufacture 2007 CE compliant

This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details.

Laser system for particle size analysis Manufacturer: Mettler Toledo Type Lasentec_S400Q Consisting of: FBRM S400Q Control Station 2 pieces of probes PC with FBRM Control Interface Software Documentation including certificates, Software and various accessories FBRM® [Focused Beam Reflectance Measurement] is a quantitative real-time measurement that tracks the rate and degree of change in particles, particle structures, and droplets as they are actually present in the process. In-line FBRM measurement® allows engineers to quickly link the dynamics of the particle system to the processing conditions. Measure particles and droplets in real time DescriptionSample OD: 9.5 or 14mm Probe length: 91 or 206mm Drive: Electric Bearing: Mechanical Lab/Plant: Lab Field unit: Stand-alone Temperature range: -20 to 90°C (standard); -90 to 120°C (optional) Pressure: 10 bar (stan ...

Number of layers = 3, material LDPE,HDPE; Peel Products : HDPE /LDPE Film 25 – 150 my, Film width max. = 1100 -1850 mm Extruder type = 70.30 D / 70.30 D / 70.30 D Nozzle = 300 mm Manufacturer Reifenhäuser, Output = 250 – 300 kg/h, with internal cooling With thickness measurement, adjustable basket, thickness control, IBC Upgrade 2017 by K design Rotatable trigger Gravimetric system 3 main components plus 3 x 3 dosing components Winder Type= Tandem Max. diameter rewinder = 950 mm Winding shaft = 76/152 mm Accessories: 2 x Corona inside and outside, path control ; Fan , Steel Structure, Dimensions : length approx. 14 m, width = approx. 8.5 m, height = approx. 14 m

Description Weber – Bluhm label printing & dispensing system Leg i-Air 4050E-30-RH-2E542-RO90_312-CC from 07/2018 Basic system Legi-Air 40508-CC on K-tripod spindle Rol+Tel Gr2 incl. – vacuum shut-off – digital l/O interface – compressed air monitoring and shutdown – sensor label on stamp – label end of roll warning – 2-stage vacuum – U-arm – terminal terminal – multilingual text display – label large roll unwinding up to 450m running length – design: right / right hand – Pressure module: Zebra 2E500 # 4#-200 dpi – Applicator: rotating stroke 90" – 312mm arm length -RO90_312

Lumacon automatic crate filling line, Automatically feeding of 4 crates/ boxes per cycle., When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling., - Complete with inclined conveyor belts, - Buffer belts, - Weighing belts, - Multiple lines available from stock (Emmeloord)

NUKON EXTREME LASER 25180 12kW fiber laser was built in 2021 in Turkey by NUKON Laser Cutting Machines Co. The machine is designed for precision cutting of large-format sheet metal with maximum dimensions of 12000 x 2500 mm. Thanks to the use of many state-of-the-art technical solutions, it is perfect for both unit and series production, guaranteeing high quality and repeatability of the manufactured parts. The NUKON EXTREME LASER 25180 performs 5-axis laser cutting with the NLCH cutting head, designed for demanding industrial environments. A number of unique features are incorporated inside the aluminium body to ensure the head meets and surpasses current industry standards. The focusing system used, together with the high-end optical system, enables accurate cutting of even very thin workpieces while maintaining high edge quality. In addition, the high energy efficiency optimises en ...

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

CO2 laser cutting machine manufactured in 2003. This BLM Adige LT702 features a maximum cutting thickness of 8 mm and can handle profile dimensions from a minimum of 20x10 mm to a maximum of Ø 140 mm. It utilizes a 2.5 kW CO2 laser technology for efficient cutting of tube and box sections. If you are looking to get high-quality cutting capabilities, consider the BLM Adige LT702 machine we have for sale. Contact us for further details.

GMP Surelam-Pro 500D Roll Laminator - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl GMP Surelam-Pro 500D Roll Laminator Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines GMP Surelam-Pro 500D Roll Laminator Price: 1375 EUR Download PDF GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to  ...

SkyLam 380 SD Roll Laminator - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl SkyLam 380 SD Roll Laminator Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines SkyLam 380 SD Roll Laminator Price: 1750 EUR Download PDF SkyLam 380 SD Roll Laminator A device in very good condition, ready for production, This is a high-quality machine made in Korea. Description: The SkyLam 380 SD Roll Laminator is a professional roll laminator with a working width of 350mm. The laminator we offer is an ideal device for a small printing company, advertising agency or office. This device gives us the ability to lamin ...