eu used for sale

: gebraucht : WA0031 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0088 : 290 € : 1 : 835 mm divided The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0022 : 288 € : 1 : 415 mm : 6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0041 : 790 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer Doka Eurex 20 basic 350, new Doka Eurex 20 basic 300, new - €41.90/piece Doka stacking pallet 1.55m x 0.85m, new = 225.00€/piece The Doka Eurex 20 basic is a lightweight and ergonomic floor prop with a load capacity of at least 20 kN (class B/D according to EN 1065). Thanks to an innovative choice of materials, it saves up to 4 kg in weight compared to conventional supports, which makes working on the construction site much easier If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Str. 1 89614 Öpfin ...

: gebraucht : WA0125 : 122 € : 1 : 835 mm : 0,4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 430 mm table width: 300 mm x-travel: 260 mm y-travel: 160 mm z-travel: 300 mm weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA The data for this ad was created with ModulMWS -  ...

: gebraucht : WA0011 : 292 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Euchner HKK100S100A05C1717 073056

Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible.

We offer used ceiling props as follows: Doka Eurex 20 top 250 - 25,00€/piece Available: 16 pieces Total: 475,00€ Stacking rack 30,00€ Doka Eurex 20 top 300 - 30,00€/piece Available: 19 pieces Total: 570,00€ Stacking rack: 30,00€ Hünnebeck Outriggers 3,00m - 25,00€/Piece Available: 21 pieces Total: 525,00€ Stacking rack: 30,00€ All supports are checked and sorted. Package price for all posts: 1550,00€ including frames If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Straße 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE ...

: gebraucht : WA0012 : 292 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0151 : 217 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0039 : 180 € : 1 : 415 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0032 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. EUBAMA ist ein Rundtisch (waagrecht) ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. 2. Kapazitäten: Durchmesser 500 mm; max. Werkstückgewicht 100 kg; 6 T-Nuten, Breite 14H7 mm. 3. Technische Daten: Ausführung waagrecht; Abmessungen L900×B800×H150 mm. 4. — 5. Ermöglicht enge Toleranzen; typisch für Automobil-, Uhren-, Werkzeugmaschinen-, Luftfahrt- und Medizinbranchen Technische Daten ohne Gewähr

; Gross weight [kg]: 1950; Inspection Date: 2026-09-19; Amount of previous owners: 1; Lift height[mm]: 1375; Maximum lift capacity [kg]: 200

Key data: 1 mm

Notching machine Make: Euromac Type: 220/6 R Year of Make: 1999 Material thickness: 1-6 mm -Hydraulic knife clamping device, with 2 hydraulic cylinders -Cutting unit with 3 guides -Reversible blade, means: positive cut: start of cutting at the front negative cut: start of the cut at the back -Variable and infinitely variable cutting angle adjustment -Stop rails with adjustment Weight: approx. 1000 kg Condition as good as new, because almost not used. No guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.

: gebraucht : WA0089 : 142 € : 1 : 835 mm : 1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0013 : 265 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0052 : 292 € : 1 : 835 mm : 80 mm : 16 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0053 : 292 € : 835 mm : 80 mm : 16 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0054 : 292 € : 1 : 835 mm : 80 mm : 16 mm Mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC punching machine manufactured in 2015. This Euromac MTX FLEX 12 features a punching force of 30 tons and an X-axis travel of 2,500 mm. It offers a Y-axis travel of 1,300 mm for multitool applications. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX 12 machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 2004. This Euromac BX 1250/30 features advanced capabilities for precision punching tasks. If you are looking to get high-quality punching capabilities, consider the Euromac BX 1250/30 machine we have for sale. Contact us for further details.

Capacity: 180 x 100 mm. Spindles: 4 Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kW Motorised thickness adjustment 4 cutterblocks Chaindrive 6 - 12 m/min Infeed table 1m70. long

: gebraucht : WA0008 : 325 € : 1 : 835 mm : 120 mm : 12 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Italien Eurostamp Tooling is quality, competence and precision. Since 1970, we have been producing exceptionally precise tools and offering extremely high-quality solutions for all those customers who constantly require the highest level of performance and reliability. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0187 : prompt, Zwischenverkauf v : 2912 € : 1 mint condition 3 x 835 + 1 x 835 mm sectioned ATTENTION: 50T tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete Euro-Diesel S.A. industrial control rack with original electronic control and interface cards. Included in this complete rack: 1× REDBUS EUR-0801 Rev.B rack/backplane 4× Card DIO Ver. 3.04 1× CAN R1 communication card 2× CARTE PSU Ver. 2.3 power supply cards 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Complete Euro-Diesel S.A. industrial control rack with multiple original control, communication, power supply and interface cards. Included in this complete rack: 1× MBCPU R2 rack/backplane 4× ACIN V2.7 cards 2× CARTE PSU Ver. 2.3 power supply cards 1× MONA R1 with Analog Devices AD202JN isolation amplifier 1× INTM Card V3.4 1× CAN R1 communication card 1× RS485 R1 communication card 1× Card DIO Ver. 3.04 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Type EURO SPECIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1.5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania)

Eurotherm Drives DC 590+ SERIES 590P/0035/500/0011/UK/ARM/0/0/0

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 23200 € : 1 : 30 to : 1250+N x 1000 mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2780 mm : 1900 mm : 4000 x 2300 x 1900 mm + Z mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/ ...

Fully automatic baler Manufacturer: EUROPRESS Type: 6000 V5 Hook lift mount Year of Make: 2013 Technical data: Pressing force: 60 t Main drive power: 2 x 22 kW Filling opening: 1,450 x 1,000 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical Machine weight: approx. 13,800 kg Bale weights: up to approx. 600 kg Transport height: approx. 2,587 mm Transport width: approx. 2,500 mm Transport length: approx. 6,645 mm Subject to errors in the technical data!

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg

We have an EUMUCO RW1 Reduce Forging Roll Machine available for sale. Manufacturer: EUMUCO Model: RW1 Condition: Used Technical specifications: Maximum workpiece diameter: 55 mm Rolling segment diameter: 370 mm Usable width of middle roll: 500 mm Usable width of outer roll: 160 mm Maximum workpiece length, middle: 570 mm Maximum workpiece length, outside: 890 mm Roll adjustment: 15 mm Drive power: 30 HP Electrical: 230/460 V Approximate weight: 22,000 lbs (10,000 kg) Please let me know if this equipment could be of interest to you, and I can provide

We sell an Isel EUROMOD_MP30 EC-Servo machine. The machine was used exclusively for winding patterns. The machine is in good condition.

Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS int ...

: 1 Bending tools with excellent value for money Induction hardened, with ground working surfaces Standard lengths: 835 mm, 415 mm and 835 mm (split). For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener, Trumpf, Wila and many more The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 255 mm centre distance: 1.080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1.000 mm control: EuroTurn spindle bore: 70 mm spindle taper: KK 8 DIN 55027 3-jaw-chuck diameter: 250 mm bed width: 360 mm turning speed range: 2 - 2.800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: PARAT Gr. 2 drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 080242 : prompt, Zwischenverkauf v : Italien : 1890 € : 1 Oberwerkzeug 1033/28°/R 0,6/8 mm 4 x 835mm Unterwerkzeug 3000/U 8 mm 3 x 835 mm + 1 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreimesserautomat von Heidelberg in einem guten Zustand. Three Knife Trimmer of Heidelberg in good condition. Dreimesserautomat / Three Knife Trimmer Heidelberg Eurotrim ET1000  Baujahr / Year 2010 - Serial-No. FM.EBAA-00047 Mechanische Leistung / Mechanical performance    max. 1,000 cycles/h Buchblock Breite unbeschnitten / Book Block width untrimmed 110 - 345mm  Buchblock Höhe unbeschnitten / Book Block high untrimmed 110 - 480mm  Buchblock Breite beschnitten / Book Block width trimmed 90 - 330mm  Buchblock Höhe beschnitten / Book Block high trimmed 100 - 470mm  Höhe des zu schneidenden Materials / Height of material to be cut 2 mm–60 mm Druckluftversorgung / Compressed air supply 6bar Stromversorgung / Power supply 400 V, 50 Hz, 3 phases + N + PE / 20 A / 8.0 kVA Maschinenabmessung /Dimensions (LxWxH) 3130 x 960 x 1620mm Maschi ...

Additional technical specifications: • max. negative pressure: 2400 Pa • max. volume flow: 1000 cbm/h

Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

sheet width: 3050 mm plate thickness: 6,5 mm distance between columns: 3100 mm : 1000 mm Cutting length: variabel mm cutting gap adjustment: variabel mm connected load: 12,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,5 x 2,2 x 1,8 m Hydraulic guillotine shear with - cutting length adjustment - cutting angle adjustment - support arms - squaring arm - rear enclosure - mobile material bin The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EDI system mounted on steel frame for the fully automatic production of ultrapure water. Normally, the system is operated following a UO system. The plant consists essentially of: 1.The EDI system consists of 3 parallel stacks of the type MK2E (total of 6 stacks and 2 centrifugal pumps). Both roads are mounted on a common frame. one below, the other above in the frame. 2. Piping and EDI cells 3. Fittings, flow meters and centrifugal pumps

Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details.