eu used for sale

Gear motor, electric motor, electric gear motor, worm gear motor, worm gear motor, Spiroplan gear motor, SPIROPLAN® right-angle gear motor -Manufacturer: SEW-Eurodrive, SPIROPLAN® right-angle gearmotor unused -Type: WA10/T DT56M4 -Speed: 22 rpm -Power: 0.09 kW -Hollow shaft: Ø 16 x 70 mm -Protection class: IP54 -Number: 6x motor available -Price: per piece -Dimensions: 255/190/H110 mm -Weight: 4.8 kg/piece

Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Manufacturer: SEW-Eurodrive, gearmotor with integrated frequency inverter with brake -Square gear unit: F series -Type: FH67BDT71D4/BMG/MM03/RA1A/KPF6 -Speed: 1.2-6.1 rpm -Power: 0.075/0.37 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 210 mm -Brake: 5 Nm -Number: 4x motor available -Price: per piece -Dimensions: 425/280/H330 mm -Weight: 44 kg/piece

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.37 kW -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Speed: 16 rpm -Power: 0.37 kW -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Speed: 27 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Weight: 10 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm -Protection rating: IP54 -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter, Movidrive -Manufacturer: SEW Eurodrive, Inverter Movidrive Type MDX91A-0020-5E3-4-XXX -Power: 0.55 kW -Input: 3x 380-500 V 50/60 Hz -Output: 0-599 Hz -Control head: Type: MDX91A-0020-5E3-4-T01/CFN21A -Number: 8x inverters available -Price: per piece -Dimensions: 360/100/H215 mm -Weight: 4.2 kg/pc.

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm -Protection class: IP65 -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 7x geared motors available -Price: per piece -Dimensions: 455/180H170 mm -Weight: 10.5 kg/pc.

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module, connection device fieldbus, fieldbus control, interface module -Manufacturer: SEW-Eurodrive, Fieldbus control interface module -Type: ECC-DFC-24-00 -Number: 18 modules available -Dimensions: 200/55/H30 mm -Weight: 0.2 kg/pc.

Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 25 mm -Technical data: see photo of the nameplate -Quantity: 42x motors available -Price: per piece -Dimensions: 230/50/H50 mm -Weight: 1.3 kg/pc.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter, Movidrive -Manufacturer: SEW Eurodrive, Inverter Movidrive Type MDX91A-0032-5E3-4-XXX -Power: 1.1 kW -Input: 3x 380-500 V 50/60 Hz -Output: 0-599 Hz -Control head: Type MDX91A-0032-5E3-4-T00/CFN21A -Number: 4x frequency converters available Price: per piece -Dimensions: 360/100/H215 mm -Weight: 4.2 kg/pc.

Geared motor, electric motor, electric geared motor -Speed: 49 rpm -Power: 0.15 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Number: 1x motor available Price: per piece -Weight: 8 kg

Power converter, current inverter, current transformer, drive inverter, controller -Perfomance: -Input: 380/415 V -Output: 460 V DC Serial No.: 05603 Price: per piece -Weight: 7.5 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power output: 4.8 kVA -Input: 380 - 50/60 Hz -Output: D 20 - 380 V -2 - 100 Hz -Number: 1 converter available -Weight: 13 kg

Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 26 mm -Technical data: see photo of the nameplate -Quantity: 1x motor available -Dimensions: 230/48/H48 mm -Weight: 1.2 kg

Geared motor, electric motor, three-phase motor, right-angle geared motor -Speed: 124 rpm -Power: 0.75 kW -Brake -External fan -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 8x motors available Price: per piece -Dimensions: 620/248/H270 mm -Weight: 50 kg/piece

Braking resistor, charging resistor, damping resistor, filter resistor -BW 215 -150 ohms Item No.: 8254354 -600 W -Number: 2 resistors available Price: per piece -Weight: 5 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power: 4 kW -U: 400 VAC -F: 25 kHz -I: 10 A Ac -P: 4 kW -Dimensions: 130/350/H210 mm -Weight: 7 kg

Safety switch, TZ -Quantity: 9 pieces available -Price: per piece -Weight per package: 1.5 kg

Limit switches, push buttons, safety switches, position switches -230 V 4 A AC-15 -24 V 4 A DC-13 Price: per piece -Quantity: 10 available -Weight: 0.5 kg

Safety switch, TZ -Quantity: 6 available Price: per piece -Weight per package: 1.5 kg

Limit switches, push buttons, safety switches, position switches -AC-12 10 A 230 V -AC-15 6 A 230 V -DC-13 6 A 24 V Price: per piece Quantity: 5 available -Weight: 1 kg

Gear motor, electric motor -Speed: 260 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Dimensions: 420/150/H220 mm -Weight: 18 kg

geared motor, electric motor -Speed: 62 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Weight: 18 kg

Geared motor, electric motor, three-phase motor -Speed: 63 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 9 kg

Geared motor, electric motor, three-phase motor -Speed: 47 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 44 Price: per piece -Quantity: 2 available -Weight: 23 kg

geared motor, electric motor -Speed: 18 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 30 mm -Brake -Protection class: IP 54 -Dimensions: 560/230/H210 mm -Weight: 33 kg

Geared motor, electric motor, electric geared motor -Speed: 186 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 44 -Weight: 21 kg

Geared motor, electric motor, three-phase motor -Speed: 103 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Quantity: 1 piece available -Weight: 28 kg

Limit switches, push buttons, safety switches, position switches -Type: NZ2HS-3131 Price: per piece -Quantity: 6x Available -Weight: 0.4 kg

Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: TP1-4131A024M Quantity: 2 available Price: per piece -Weight: 0.5 kg

Resistor, mounting heat sink for brake resistors -Item No.: 826 267 5 -200 Ohm/250 W -External dimensions: 80/110/H15 mm Weight: 0.4 kg

Safety switch, TZ -Quantity: 4x Available -Price: per piece -Weight per package: 0.5 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 3x380/500 V - 50/60 Hz /-10% -Output: 3 Ph: 0-380/500V 0-400Hz 5.5A AC -Weight: 6 kg

Safety switch, TZ -Quantity: 7x Available Price: per piece -Weight per package: 0.4 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 76 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Weight: 11.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 112 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake -Number: 1x available -Price: per piece -Dimensions: -Weight: 21 kg

pressure: 36.0 t stroke: 250 mm flat steel: 200 x 10 mm working feed: 6.0 - 24.0 mm/min return speed: 60.0 mm/min work height max.: 900 mm table:: 580 x 1170 mm total power requirement: 4.1 kW motor: 400 Volt 50 Hz oil volume: 60.0 ltr. weight: 1100 kg range L-W-H: 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on request Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting - Several/various bending tools - Infinitely variable adjustment of bending speed and pressing force - 1x freely movable double foot switch - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)

We offer Doka Eurex 30 top 350 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 350, used - 52,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer Doka Eurex 30 top 550 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 550, used - 79,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...

Vertical machining center EUMACH SUMO 1100, CNC Selca X 1100 mm Y 610 mm Z 610 mm Rapid feeds linear axes X Y Z 30 m / min Table dimensions 1270 x 640 mm Max table load 1200 Kg Spindle 16 Kw / 10,000 rpm - ISO 40 Tools 24 Coolant through the spindle 2007 Under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets

Fan / blower from ABB Solyvent-Ventec design 90 degrees m³/min 367 mm Water column 800 Power kw 75 Suction diameter 550 mm Output 480 x 360 mm Good condition, test run carried out

Brand SEW Eurodrive Type R07 DR63L4 TF AND8 Voltage Volt 3 fase 400 volt Force KW 0,25 KW Rotational speed RPM 405 RPM Shaft size mm Units in stock 1 Length 35.00cm Width 18.00cm Height 15.00cm

consisting of: base frame, 2 storage containers, stainless steel, tank container, Fabr. WERIT, osmosis unit, type: SILHORKO, built in 1995, control cabinet system, Fabr. RITTAL, with piping system, filter, pump and valve technology as well as 2 tipper bodies, wheeled

Brand SEW Eurodrive Type RF07 DT56L4/AND8 Voltage Volt 3 fase 400 volt Force KW 0,12 KW Rotational speed RPM 284 RPM Shaft size mm 20 mm Flens pasrand 80 mm Units in stock 1 Length 30.00cm Width 20.00cm Height 10.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...