0 ESSA used machine for sale

Fully Automated Craft Brewery 30hl/brew with Meura Mash Filter This fully automated 30 hl craft brewery, installed in 2015–2017, is in excellent condition and represents high-end European brewing technology. The system is a complete, turnkey solution including all necessary auxiliary equipment. The brewery is still installed and fully operational. The brewhouse has a capacity of 30 hl per brew and is capable of producing approximately 6–8 brews per day. It features a traditional three-vessel configuration equipped with a Meura mash filter for efficient wort separation. The brewery has been used to produce a wide range of both filtered and unfiltered beer styles. The cold block includes 3 × 75 hl fermentation tanks and 2 × bright beer tanks. Additionally, the system is equipped with advanced beer filtration capabilities, including a GEA centrifuge (unitank-compatible), kies ...

Hazardous goods container, REI 90 / F 90 fire protection warehouse type WFP, cantilever racks, interior lighting, drive-on ramp, leakage sensor – used - : Price ex location: 29.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of Make: 2013 Type: BMC-X 600-K-T90-2 Type: REI 90 / F 90 Fire Protection Bearing WFP-X 14; Surface room system Exterior paint RAL 9002 grey-white Interior paint RAL 9002 grey-white Door finish (both sides) RAL 9002 Grey White Dimensions Inside Exterior without extensions Width (mm) 2,560 2,952 Depth (mm) 5,500 5,938 Height (mm) 2,500 2,924 Collection volume Collection volume steel trough 1,560 litres Door arrangement short side Stainless Steel Door Handle with Anti-Panic Version 1 ST Technical ventilation fire protection system 1 ST Exhaust air monitoring 1 pc Door hold-open system  ...

KUKA KR 30 L16-2 robotic welding station was built in 2017 in Germany by KUKA Roboter GmbH. The welding station has been specially designed for the precision welding of structural components with even the most complex geometries. All the necessary equipment and machinery with the best technical specifications were integrated inside a cell with service doors and light curtains. This created a complete, fully-automated system that significantly speeds up production, increases weld repeatability and reduces downtime to a minimum. The machining process is performed by a KUKA 6-axis robot, distinguished by, among others, its clever design and robust arm with an increased range of movement. The arm’s reach of 3102 mm and a payload of 16 kg enable the welding of large and complex structures, while maintaining a highly dynamic and repetitive process. During automated welding, dynamic and ac ...

Key data: 165 kN, 6 mm, 1250 mm

The machine was purchased directly from Trumpf in 2015. It was a demonstration machine from 2012, which had previously been used in the Trumpf training workshop (there only a few operating hours). Later, it was used in single-shift operation in the housing production of welding machines. Therefore, only 15700 operating hours. Exclusively in the sheet metal sector, especially sheet steel 1.25 and 2.0mm, occasionally 3mm. No stronger material. No known defects, machine is currently still in use, available from May 26. Reason for sale: Discontinuation of production. The "Compact Edition" of the TP1000 is optimized for a part size of 1250x1250. Larger formats can be done with the "Reset" function, additional tables are necessary. The outstanding advantage of the "Compact" machine is the small space requirement of only 4.13 x 5.84 m. The machine is equipped with almost all availab ...

NEW | Industrial Refrigeration Unit CF Chiller - 235 kW Cooling Capacity | Year of construction 2023 | Original packaging For sale is a new, unused CF Chiller industrial chiller with 235 kW cooling capacity. The system was ordered in 2023 for an industrial project, but never delivered. It is in its original packaging in manufacturer's foil and unused in our warehouse. Viewing possible at any time by arrangement. Technical data: - Cooling capacity: 235.7 kW - Power consumption compressor: 45.8 kW - Water temperature inlet: 20 °C - Water temperature outlet: 15 °C - Cooling medium: water - Water flow evaporator: 40.55 m³/h - Evaporator pressure loss: 70 kPa - Refrigerant: R410a - Compressor Type: Scroll - Water tank volume: 500 litres Dimensions & Weight: - Length: 3,776 mm - Width: 1,142 mm - Height: 2,293 mm - Weight: 1,250 kg - Gas conne ...

Krones Pressant Universal Year of Make: 2020 Neuglass Pusher Output: Operates at 45,000 bph

Key data: 100 KG, 1000 mm, 2200 mm

Complete storage solution including stage, shelving system and layout – ready for immediate use For sale is a complete storage system of the company ELVEDI (model RX 25) with two levels, ideal for logistics, wholesale or e-commerce. The facility is currently constructed, fully functional and can be taken over and used immediately. Technical data: >Total area: 537.5 m² > levels: 2 (ground floor + mezzanine) > shelves in total: 490 pieces    >Ground floor: 262 shelves    > floor: 228 shelves >approx. 1,200 shelf compartments >additional approx. 200 spare shelf parts > shelf width: approx. 1000 mm > Shelf Height:    >bottom approx. 2200 mm    >top approx. 1770 mm > load capacity per floor: approx. 100 kg Construction & Capacity: >Each level consists of several clearly structured aisles > shelves are arranged on both sides of each aisle >each she ...

We offer this well-preserved Hugong INTECUT-HT plasma cutting machine/CNC portal cutting machine KAI-TEC Smart, incl. marking function, built in 2025, because we are purchasing a larger system. The machine was purchased for one project only and has been in operation since August 2025. The manufacturer's warranty runs until August 2026. The system is fully functional, technically in perfect condition and not worn. There are normal signs of use. It is now too small for our company, but it is very suitable for smaller locksmiths, metal construction companies or workshops. Technical data & equipment CNC gantry cutting machine KAI-TEC Smart Cutting range: approx. 1,500 × 3,000 mm CNC control with cutting database Plasma system NEOCUT 105 with marking function Plasma cutting range: 1–20 mm mild steel (VA & aluminium max. 10mm) Machine burner incl. hose package Automatic ...

Used Krones bottle filling line. New 2018/2020. Product: Beer Capacity: up to 45,000 bottles per hour / 500 ml Available bottle types: 500 ml The line is in very good condition. The offered scope includes equipment ranging from a new glass depalletizer to a labeling machine. The line consists of the following equipment: 1. Depalletiser of new glass Krones Pressant universal, KR74763 2020 2. Pallet transport Krones Palco, KR570AQ 2020 3. Residual liquid control Krones Separate laugekontrol, K069698 2020 4. Rinser Krones Moduljet, K563G22 2020 5. Filler Krones Modulfill, K129D84 2018 6. Pasteurizer + Beer buffer tank Krones Varioflash, KB76179 2020 7. Full bottle inspector Krones Checkmat 731 FM-G, K731CSR 2018 8. Dryer Krones Linadry 890, K890AFC 2018 9. Labeler Krones Topmatic, K071C85 2018 10. Labeled bottle inspector Krones Checkmat 731 EM, K731CSQ 2018 1 ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 22AVV injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ad ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

We offer Peri Pep 30-150 galvanized, used - incl. PERI Gitterbox 80x120-K lacquer. Special offer 60 x Peri ceiling props including PERI lattice box 80x120-K lacquer. = 1.620,00€ 60 pcs PERI Ceiling Prop PEP 30-150, galvanized, used 1 pc. PERI Lattice Box 80x120-K lacquered, used The PERI PEP slab props are particularly characterized by their high load-bearing capacity and low weight. Due to a 100% hot-dip galvanizing, the tubular steel ceiling column has a long service life. The risk of injury is significantly reduced by a built-in crush protection of 10 cm. Due to the large adjustment range of 12 cm, frequent replugging is no longer necessary. The high-quality forged nut with hardened contact surface and two-way thread make loosening under full load much easier. All supports are checked and sorted - immediately ready for use. Only while stocks last. Subject to pri ...

Manufacturer: WEBER Type: MSG 460 Power: 0.18 kW Power supply: 400 V/50 Hz Weight: 120 kg Dimensions: Depth 600 x Width 540 x Height 760 mm A special device for precise sharpening of knives. The MSG 460 type is designed to ensure high sharpening quality and suitable blade geometry, which is necessary when processing meat, cheese and other foods where maximum cutting precision is required. Blade diameter range: 420–460 mm Sharpening angle adjustment: 15°-35° Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Nagy PB-80 Pallet rack attachment panel With a standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high extension field. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Stand height: approx. 10.30 m Stand depth: approx. 1.10 m S ...

7.4 m Nagy PB-80 Pallet Rack At standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high rack. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Shelf length: approx. 7.40 m Stand height: approx. 10.30 m Stand depth: approx. 1.10 ...

Nagy PB-80 Basic field for pallet racks At standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high rack. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Stand height: approx. 10.30 m Stand depth: approx. 1.10 m Stand Type: PB-8 ...

25.80 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 25800 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 7 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 196 Scope of Delivery 08 x Stand 10300 x 1100 mm galvanised 84 x Truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded  ...

18.50 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 18500 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 5 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 140 Scope of Delivery 06 x Stand 10300 x 1100 mm galvanized 60 x truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded  ...

11 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Shelf length: 11000 mm Stand height: approx. 10300 mm Stand depth: approx. 1100 mm Stand Type: PB-80 Profile: 80 x 60 mm Truss: screwed Stand surface: galvanized Clear field width: 3600 mm Truss: 3600 x 120 x 45 mm Truss surface: blue lacquered (RAL 5015) Number of fields: 3 Number of levels: 7 incl. floor parking space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible field load: 12000 kg Pallet spaces: 84 Scope of Delivery 04 x Stand 10300 x 1100 mm galvanised 36 x Truss 3600 x 120 x 45 mm blue Technical Summary Stand: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, truss screwed. Trusses: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded fram ...

Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area)  ...

OVERWRAPPING MACHINE SOLLAS 19 Mobile automatic overwrapping machine, designed for precise single wrapping of folding cartons in the cosmetics sector. SIEMENS, Simatic S7-300 PLC. With linear infeed conveyor, 2 format sets and spare parts. Built in 2004. PRODUCTION - Machine speed: 50 cycles per minute max. (depending on setup, product, feed system, film type) Processable materials: PP, PE, and coated paper Package dimensions - Width (W): min. 40 mm; max. 200 mm - Length (L): min. 45 mm; max. 300 mm - Height (H): min. 16 mm; max. 140 mm Film roll dimensions - Outer diameter: 320 mm - Maximum roll width: min. 50 mm; max. 425 mm - Inner diameter: 45-80 mm - Film cut length: min. 110 mm; max. 590 mm SIZE - Dimensions: 3700 x 1800 x 2000 mm (ca) - Weight: 1200 kg (ca) ENERGY CONSUMPTION - Power supply: 230/400V - 3 phases + neutral 50/60Hz - Con ...

CLOSING MACHINE BAUSCH+STROBEL KS-1025 Fully automatic intermittent-motion closing machine/crimper for vials and cylindrical glass, plastic or metal containers with up to two different types of closure. Includes separate electrical panel (300 kg, 800 x 600 x 2100 mm). Built in 1996. PRODUCTION - Output: up to 4200 units/h - Processable types of closure: rubber stoppers; droppers; screw caps; pilfer-proof caps and crimp caps; special closures with pipettes; pump spray assemblies; child-proof closures DIMENSIONS - Size (mm): 2200 x 1600 x 1800 ca. - Weight (kg): 1500 ca.

An Atlas Copco screw compressor is being sold. Bj 2022 Operating hours and technical data in the picture Plant has always been serviced and is sold due to cessation of operations If required, the pipes for the air supply can be purchased additionally. Machine has to be dismantled by yourself. The system is handed over by us without electricity. Article location Nuremberg All information without guarantee Available from June 2026 Inspection and test run is possible Sale only to tradespeople Price 8000 Euro net plus VAT Loading facilities available

Vertical lathe Hessapp DVH 250 BJ 2004 (already dismantled)

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...

From our current stock we sell 7 cylinder heads with the M.A.N item number / spare part number 51.03101.6923. ( New ). Our item number: 58031001. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how. Draw on  ...

Banding / Banding Machine ATS Tanner Type US 2000 LB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven and universally applicable (see video below). Versatile, infinitely adjustable via two potention meters/rotary controls in terms of belt tension and belt length. Tape can be added later via pressure switches if necessary. Counter currently shows around 740,000 work cycles. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

EXERON DIGMA HSC 600 milling center was built in 2010 in Germany by Exeron GmbH. It is an extremely versatile yet compact machine designed for the production of precision tools and moulds. A number of state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The EXERON DIGMA HSC 600 is distinguished by its extremely rigid gantry structure, made of polymer concrete. The entire workspace has been fully maximised to ensure maximum freedom of operation. It features all the necessary equipment, i.e. a reliable electro-spindle, a 30-position tool magazine and a large work table with a length of 900 mm and a width of 550 mm. The machining process is performed fully automatically in HSM (High Speed Cutting) technology. This technology allows a significant reduction in cycle ti ...

Belt spiral mixer with 1,000 l. gross capacity, equipped with 2 cutter heads (4.0 kW / 2,885 rpm each). Drive belt coil via roller chain. Incl. base frame, without motor and chain (necessary data can be provided). Neat condition.