140,795 used machines on RESALE, but how to find them? Machine Search
Voltage: 3-phase 380V, is in very good condition, ready for operation, the puller roller has been replaced, with various accessories, an on-site inspection is possible.
This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine.
This 5-axis AGIE Progress 3 wire EDM machine was manufactured in 2006. It features travel paths of 500 x 350 x 430 mm and a maximum workpiece weight of 800 kg. The machine is equipped with the AGIE Vision control unit and includes various near-new clamping systems and a wire alignment device. If you are looking to get high-quality erosion capabilities, consider the AGIE Progress 3 wire EDM machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2024. This Arburg Allrounder 270 C 400-70 features a clamping force of 400 kN and a maximum specific injection pressure of 2738 bar. It includes a mould height range of 160 - 475 mm and a distance between tie bars of 280 x 280 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 270 C 400-70 machine we have for sale. Contact us for further details.
ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...
This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.
Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).
COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.
Hydraulic injection moulding machine manufactured in 2009. This SUMITOMO SHI DEMAG Systec 210/580-1450 features a clamping force of 210 t and a screw diameter of 50 mm. It offers a maximum specific injection pressure of 2426 bar and a maximum swept volume of 530 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 210/580-1450 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details.
Electrical injection moulding machine manufactured in 2019. This SUMITOMO SHI DEMAG Intelect 2 50/360-110 features a clamping force of 50 t and a screw diameter of 18 mm. It offers a maximum specific injection pressure of 2800 bar and a maximum dosing volume of 23 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Intelect 2 50/360-110 machine we have for sale. Contact us for further details.
Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
1 Gebr. Tube bending machine Tubomat 42 mm with accessories Technical data: Working range / pipe diameter: 6 to 42 mm as standard Max. wall thickness: approx. 3 mm to 3.25 mm (depending on material and tube diameter) Pipe push-on length (attachment length): Approx. 1,500 mm as standard Drive power: Electro-hydraulic drive with approx. 1.5 kW to 2.4 kW Electrical connection: 400 V / 50 Hz (three-phase current) Machine weight: approx. 600 kg to 1,000 kg (depending on table and fence length) ⚙️ The 4 main integrated functions (complete machining) Bending: Electro-hydraulic bending process with hydraulic pipe clamping, sliding piece adjustment and programmable or pre-selectable bending angle control (with mandrel retraction to prevent pipe kinking). Saws: Integrated pipe cross-cut saw (circular saw) for right-angled, clean cuts incl. coolant device. De ...
Gathering machine Bourg BST-10 2 Towers Stitching Folds Cutting
Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.
1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished
module: Diameter: mm boring diameter: mm Sprocket cutter DIN3968 Parting 65 RO36 R1 EK 20° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type: Parts washing machine Manufacturer: Bio Circle Type: HTW II 1000 IS Year of Make: 2015 Condition: used / very good, as hardly used Offer will only be sent if a complete imprint is provided! Price 6.500 Euro incl. 19% VAT Location Warstein , Germany Reference number M-BIO-0926 DESCRIPTION We offer you a used parts washing machine from the manufacturer BIO-CIRCLE Basket diameter 975mm Payload 250kg Basket drive and heating. Exhaust fan see last picture for more data. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your complete contact details in order to receive an offer with our terms and conditions of payment. Errors in the descriptions and offers are reserved
Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm
Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg
Wire diameter: 0.4-1.5mm, control: MCS SYSTEM V, an on-site inspection is possible.
Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request
Niemeyer shaft base paver for lower parts 1100 mm incl. many accessories such as moulds, base sleeves, rotating device, spare parts, from location, immediately available
Manufacturer: HYUNDAI WIA Model No.: L200SY Year: 2014 Condition: Used Stock number: 4923 Control System: FANUC Series 31i Model A Switch-on hours: 11750 h Maximum turning diameter: 550 mm Max. turning length: 530 mm Maximum length of travel in the X-axis: 220 mm Maximum spindle speed: 4000/6000 1/min Max. turning diameter: 240 mm Grinding diameter: 550 mm Spindle diameter: 65 mm Lathe chuck diameter: 210 mm Maximum length of travel in the ZB axis: 720 mm Maximum length of travel in the Y-axis: +-40 mm Number of all tools: 12 pieces Counter spindle power: 3.7/2.2 kW High pressure cooling: 14.5 bar Spindle drive power: 15/11 kW Length: 3045 mm Width: 1707 mm Weight: 4600 kg Height: 2021 mm 2019: Replacement of chuck and tool probe Equipment: 8 Pieces Tool Holders 4x pieces of powered tools Inner Holder Reduction Sleeves
Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location
Laser marking machine manufactured in 2009. This ELECTROX MaxBox Plus features a power supply of 110/220 V and an apparent power capacity of 1.25 kVA. If you are looking to get high-quality laser marking capabilities, consider the ELECTROX MaxBox Plus machine we have for sale. Contact us for further details.
This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2005. This DEMAG D 650 features a clamping force of 6500 kN and a screw diameter of 80 mm. It offers a shot weight of 1,600 g and includes a handling system by Wittmann. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 650 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2007. This DEMAG D 1300 features a clamping force of 1300 t and an injection weight of 5200 g. It includes a handling system with a Wittmann DR 853 robot, offering impressive Z, Y, and X-axis strokes of 3500 mm, 2500 mm, and 1600 mm respectively. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 1300 machine we have for sale. Contact us for further details.
I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.
Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...
Bearing number: 3694 HONING MACHINE Manufacturer: PLEIGER, Type: B - 290 Year of construction: 2002 Specifications: honing length 10000 mm workpiece size dia. 355 mm Min. Max. Honing Dia. 290 mm Length: 27,000 mm, Høhe: 10,000, Width: 2,000 mm, Weight: 30,000 Kg
Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25
Key data: 1000 , 89 , 30
In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...
Janssen Pastry Moulding Machine Type: FM128 K4 with 1x speculoos roller Extra rollers available at extra cost Band width: 23.5cm with heating Height: 145cm Width: 80cm Depth: 50cm
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
Hydraulic injection moulding machine manufactured in 2015. This DEMAG D 420 features a clamping force of 420 t and an injection weight of 1100 g. It includes a handling system with impressive working strokes of Z=2500 mm, Y=1600 mm, and X=900 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 420 machine we have for sale. Contact us for further details regarding this machine.
Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details.
Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers (speculoos + . ) thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space The machine is in need of overhaul Dimensions: Height: 122cm Width: 170cm Depth: 52cm
A used sinker EDM machine is offered for sale. Equipped with F 100 filtration system. Inspection possible by appointment.
This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2022. This HAAS ST-20 features a maximum cutting diameter of 13.00 in and a maximum cutting length of 22.5 in. It includes a robust spindle power rating of 20.0 hp and a rapid rate of 945 ipm for both axes. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20 machine we have for sale. Contact us for further details.
BENHIL BUTTER PACKER MODEL : 8311 FORMAT : 250grams Capacity : 40pcs/min Hopper Feed Condition : Fully Refurbished
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. Th ...
Vertical turning machine manufactured in 2007. This DOOSAN PUMA V400-2SP features a maximum turning diameter of 400 mm and a turning height of 400 mm. It includes dual 8/12-station turrets and operates with a FANUC Series 18i-TB CNC control. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA V400-2SP machine we have for sale. Contact us for further details regarding this machine.
maximum number of results exceeded
please refine your search
