es verbau used for sale

- Adjustment range: 3 - 225 A - TIG open circuit voltage: 90 V - Total power: 6.5 kW - Machine weight: 84 kg - Space requirements (W x D x H): 0.83 x 0.46 x 0.64 m Details with cooling, additional foot switch Accessories Documentation, ground cables

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Used parallel lathe EST TICINO 400 available and visible at our office. Technical data: - CAM-LOCK connection - ELBO 2-axis dimension viewer - Quick checks on the wagon - Spindle brake - Centre height: 400mm - Distance between the centres: 3000mm - Turning diameter on the wagon: 550mm - Table turning diameter: 820mm - Turning diameter on the recess: 1050mm - Bar clearance: 130mm

Turning diameter: 800 mm Turning length: 1500 mm Spindle bore: 130 mm Motor power: 15 HP/kW Swing over bed Ø:        800mm Swing over cross slide Ø:470mm Swing in the gap Ø:      1400mm DBC Turning Length:      1500mm Gap length:              750mm Spindle bore:            130mm Spindle power:           15kW Bed width:               600mm Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Speeds / ranges:         600Rpm Length:                  4500mm Width:              & ...

Machine type: Fully automatic TIG welding system with turntable Manufacturer: ESS Model: 211 DTG / DT50 / PS 8 Year of construction: 1999 Condition: very good Type of offer: used machine Specifications: Control: Control unit: ESS PS 8, Pulse remote control FSP 100 Table: swivelling turntable Type: DT 50 Diameter: 300 mm Load: 50 kg Speed range: 0.43 – 13.0 rpm. Drive: 3 – 205 Amp. / 230 V, automatic ignition Remark: with three-jaw chuck and various accessories, Complete documentation The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Motor power grinding wheelhead: 15 Cv, Total power: 16.5 Cv, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Weight: 1.900 kg

CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

Amperage range maximum: 300 A Amperage range minimum: 240 A Welding machineESS - SynMag 4000 MACH-ID 7643 Make: ESS Type: SynMag 4000 Year: 2008  Rated power 60 %:300 Rater power 100 %:240 Imput:           400A Length:          900mm Width:           600mm Height:          900mm Weight:          180kg

Used full gate Esterer HDE/S with swing frame and automatic overhang adjustment for complete and efficient cutting of tree trunks including loading and unloading. Consisting of: · Round wood feed 1 · Round wood feed 2 · Clamping carriage + auxiliary carriage · Full gate Esterer HDE/S · Riving knife · Roller conveyor with 2 discharge stations · Control and hydraulics · Approx. 140 gang saw blades Options: RIVO R 200 GA automatic sharpening machine Setting device Volmer P H 4 D The system is in good used condition and can be inspected in operation by arrangement. Output: approx. 80 fm per shift, frame width: 700 mm, headroom: 700 mm, stroke: 500 mm, feed: max. 13 m/min, engine: 75 kW, More technical data: On demand

For sale automatic Flowpack, with automatic feeder for tablets/candies. Used for testing only. 8000 pcs now.

This ESPE CTO 250/4000N Bending machine was manufactured in the year 1995 in Czech Republic. The pression force of this machine is 250 T.

This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.

This ESAB Suprarex SXE-HD 3500 Plasma Cuttting Machine was manufactured in the year 2014 in Germany and has 10 production hours.

ESPE ESPE CTO 125/3125 press brake 1996 serial number 332200/T29-07

Max. electrode force: 12.7kN, nominal power: 3x 80kVA.

Working table dimensions: 1500x3000mm, including filtration system and Plasma Device HYPERTHERM Powermax 1000.

Max. electrode force: 5600N, nominal output: 130kVA, connected load: 324kVA, weight: 630kg.

Portal width: 6500mm, track length: 16,000mm, number of burners: 4, with documentation.

With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible.

Welding rectifier: A10-355K, welding process: MIG/MAG, power connection: 3-phase, 220/380V, 50 Hz or 220V, 60 Hz, output range: 50A/15V to 355A/29V. Duty cycle: 355A/29V at 20%, 315A/30V at 60%, 280A/28V at 80%, 250A/27V at 100%. Open-circuit voltage: 17-39V, current at 220V: 41A at 50%, 34A at 60%. Current at 380V: 24A at 50%, 20A at 60%, weight: 175kg.

Substrate dimensions: 400x300mm.

With computer, Windows XP, tray support, 12x feeder base plate and documentation, over the years the following parts have been replaced: placement head (Z-axis), control board placement head, main board laser, all belts, head cable, PC (already with Windows XP), the placement machine last ran in 2020, since then it has been unused, was maintained regularly.

Description Granulator complete with mill, vacuum cleaner and big bag filling structure. Number of blades: 3 + 2 fixed Rotor diameter 500 mm Knives length 800 mm Cutting chamber dimensions: 800 x 750 Size of the mouth: 700 x 650 Motor power 30 kW

Please note! without bottle

ATTENTION: without lattice boxes and without pallets (pallet exchange is possible)

Max. air volume flow (m³/h): 500; Connection Diameter (mm): 80; Suction nozzle height (mm): 300; Max. negative pressure (Pa): 1,600; Drive power (kW): 0.55; Total depth (V): 670; Sound emission (dB(A)): 65

including various boxes of electrodes, scaler and welding helmet

1a, 230v.

Fermentation interrupter, Esko, Type RM 63

Pretzel oven - continuous oven made of stainless steel, Fabr. ESBACK

Fat baking device, Fabr. Esback, 36 Berliners, turning device

Diesel tank ESE with 2000 l for sale.

max. flow rate: 1500 m³/h max. vacuum: 2500 Pa 1 filter, filter area: 15 m² electr. Connection: 400 V, 2.2 kW 2 intake openings: 140 mm Ø Space requirement of the system: 950 x 750 x 1375 mm Weight: 74 kg 2 moving. Extraction arms: 2 x 1.5 m long

Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Regulating wheel width: 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Motor power grinding wheelhead: 15 Kv, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 Kg, Accessories included: Sliding portarlas, Cymbal grips, Speed ​​variator for the drag wheel, Cooling equipment OPTIONAL: Fairing, Automatic centralized greasing, CNC 1 Year Warranty / Porta enfile rules, Saucers wheel holder, Refrigeration equipment OPTION: Protection,, automatic lubrication system, CNC, 1 year warranty

Center height: 999 mm Center distance: 2000 mm Spindle bore: 130 mm DBC Turning Length:      2000mm Swing over bed Ø:        1040mm Swing over cross slide Ø:710mm Swing in the gap Ø:      1780mm Gap length:              1000mm Spindle bore:            130mm Bed width:               600mm Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Power:                   22kW Speeds / ranges:         600Rpm Feed rate X-Axis:        4000mm/min. Feed rate Z-Axis:        4000mm/min. Length:    ...

Ref. -No.: 10195 Manufacturer: ESAB Storage location: Halberstadt Country of origin: Schweden serial number: 620-703-3544

Center height: 710 mm Center distance: 2000 mm Spindle bore: 130 mm DBC Turning Length:      2000mm Swing over bed Ø:        1040mm Swing over cross slide Ø:710mm Swing in the gap Ø:      1780mm Gap length:              1000mm Spindle bore:            130mm Bed width:               600mm Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Power:                   22kW Speeds / ranges:         600Rpm Feed rate X-Axis:        4000mm/min. Feed rate Z-Axis:        4000mm/min. Length:    ...

Manufacturer: Esta Ventilator, Year: 2006, Diameter intake mm: 150, Engine power kW: 1,1 Kw, rotations rpm: 2800, Direkt drive: yes, Year :2006

grinding diameter max.: 50 mm regulating wheel width: 125 mm max. width of grinding wheel: 125 mm total power requirement: 10.5 kW weight of the machine ca.: 1.8 t dimensions of the machine ca.: 1940x1790x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,