We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
AGIETRON HYPERSPARK 2 HS Sinker 2008 Design with lowerable working container Work table with 50 mm hole grid travel X/Y/Z 350x250x350 mm -Workpiece size: LxWxH=650x580x250 mm or 820x420x250 mm Integrated C axis, for rotation, indexing and erosion Electronic laser measurement of all axes Detection of the electrode and workpiece position 1 set of documentation (CD + manuals) AGIEVISION 5 Control with multitasking DNC interface with transmission protocolXon/Xoff and LSV2 2 serial interfaces RS 232C for DNC and master computer LAN connection for data exchange via in-house network RJ45 3 drives: hard drive, 3 1/2" floppy disks, CD-ROM Without tool changer
used
AGIETRON IMPACT 2, built in 2002 AGIEVISION Control Travel: X = 350 mm, Y = 250 mm, Z = 350 mm Max workpiece dimensions (L x W x H): 650 x 580 x 250 mm x 820 x 420 x 250 mm Max workpiece weight: 400 kg Distance table to pinole: 170-520 mm Pinole with automatic chuck Mecatool Including Astrol electrode and pallet changer Working container can be reslid for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high-performance generator with 72 A Removal rate copper/steel: 450 mm3/min Removal rate graphite/steel: 530 mm3/min Best achievable surface Ra 0.2 microns 10.4" LCD color screen, lifting keyboard and mouse, JOGBOX for the axis process 2r90di Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm
used
Maximum distance between head and table: 525 mm Longitudinal stroke: 300 mm (X) Cross stroke: 150 mm (Z) Container dimensions: 600 x 400 x 225 mm C-axis Spanning system Hirschmann Table dimensions: 400 x 275 mm Max table weight 450 kg disk filter
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0 Tank contents: 0 CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 800 mm Table width: 560 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 450 mm Cross traverse (Y-axis): 320 mm Max. distance from the table and sleeve: 640 mm Working vessel:length inside: 1195 mm Width: 800 mm Height: 410 mm Working head: way rapid feed (Z): 410 mm Dielectric aggregate: Contents: 560 l Height: 870 mm Width: 2110 mm depth: 750 mm net weight: 300 kp Generator: Power: 128 A Height: 2100 mm Width: 650 mm depth: 600 mm Total power required: 7.0 kVA Operating voltage: 380 Volt Machine´s weight about: 320 kg Machine´s weight about: 4100 kg Overall dimensions machine: Length: 3700 mm Width: 2110 mm Height: 2700 mm
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0 Tank contents: 0 CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 750 mm Table width: 600 mm Dimension of the workpice: Length: 1200 mm Width: 850 mm Height: 400 mm Table load max.: 1600 kg Longitudinal traverse (X-axis): 600 mm Cross traverse (Y-axis): 400 mm Height adjustment (Z-axis): 450 mm max. electrode weight: 100 kg Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 4500 kg Overall dimensions machine: Length: 3150 mm Width: 2750 mm Height: 2960 mm
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0 Tank contents: 0 CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 500 mm Table width: 400 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Max. distance from the table and sleeve: 150/450 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Working head: way rapid feed (Z): 300 mm max. electrode weight: 50 kg Dielectric aggregate: Contents: 410 l Generator: Power: 64 A Total power required: 7.5 kVA Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1900 mm Width: 1690 mm Height: 2800 mm
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0 Tank contents: 0 CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 400 mm Number of spline: 3 T-channel width: 12 mm Distance of the T-slots: 125 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Height adjustment (Z-axis): 300 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Dielectric aggregate: Contents: 450 l Total power required: 5 kVA Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3300 mm Width: 2400 mm Height: 2480 mm Various accessories: Loading roboter: Type: QCRi Pallet positions: 8 Holder: 54 Fire extinguishing system (without bottle) Interface serial port RS 232 Lamp
used
This Excetek V650G Erosion machine was made in 2016 in Taiwan. The machine has a wire diameter of 0.15~0.3 mm.
used
This Sodick VL600Q Erosion machine was manufactured in the year 2016 and has 9958 hours. It is equipped with a Sodick LN2W control unit. The machine has a Wire diameter of 0.1-0.3 mm.
used
This EXERON 316 XXL Erosion machine was manufactured in the year 2013.
used
This OPS Ingersoll Gantry 5000 Erosion machine was manufactured in the year 2002 in Germany and has 72500 erosion hours. The machine has an Erowa IMC Robot for changing electrodes and workpieces.
used
This GF FORM 20 Erosion machine was manufactured in the year 2018 in Switzerland. It is equipped with a GF AC FORM HMI control unit.
used
AGIE AGIETRON 100 C Tool Change 16 positions Control on axes + axis C
used
This AGIE AGIEMATIC + AGIEPULS 60 HSF erosion machine was made in the year 2000. It is equipped with an Agie control unit. The machine has a table of 600 x 450 mm.
used
This SODICK VL 400Q Erosion machine was manufactured in 2017 in Hungary. It has a movement range of X400mm, Y300mm, Z220mm. Its tank Size is 860mm x 690mm and its control type is LN2W SODICK. Contact us anytime for further information.
used
This MAKINO EU64 Erosion machines machine was manufactured in 1999 in Japan. It is operated through a MAKINO MGW-N control unit. This 5 axis machine can work with a workpiece weight 1500 kg.
used
This Mitsubishi EX 8 Erosion Machine was built in the year 1996 and has approximately 28000 production hours. It is equipped with a Mitsubishi FP35E control unit. The machine has a table of 500 x 350mm and a max. workpiece weight of 550 kg.
used
This SODICK ALC400P Erosion machine was manufactured in the year 2020 in Thailand and has 3450 operating hours. It is equipped with a Sodick Motion Controller. The machine has a ceramic work surface. Contact us anytime for further questions.
used
AGIE AGIETRON 200 C Dimension table 800 x 630 mm working tank (internal size) 1070 x 740 x H. 420 mm Max size piece 1000 x 700 x H. 320 mm Axis X 500 mm | Y 350 mm | Z 500 mm Rapid speeds 720 mm
used
This SODICK ALC600G Erosion machine was manufactured in the year 2019 in Thailand and has less than 1000 production hours. It is equipped with a SODICK CELADA control unit.
used
Spark Erosion Machine AGIE AGIETRON 250C used machine in excellent condition tool change 24 positions
used
This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.
used
This ONA QX8 B1 L erosion machine was made in the year 2016 in Spain. The machine has a weight allowed on the table of 20000 kg.
used
This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.
used
This MITSUBISHI FA20SM Erosion machine was manufactured in the year 2006. The machine has a wire diameter of 0.1 to 0.3 mm.
used
This Sodick VL600Q Erosion machine was manufactured in the year 2017 in Thailand. It is equipped with a SODICK control unit.
used
Dieburg Pronto 5035 CNC Die-sinking EDM machine
used
This AGIE AGIETRON INTEGRAL 3 EDM Wire Cutting Machine was built in the year 1998. The machine has a table of 800 x 600 mm.
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0 Tank contents: 0 MACH-id 4000 MERK CHarmilles TYPE Roboform 31 YEAR 1996
used
This AgieCharmilles CUT 20 P Erosion machine was made in 2015 in China.
used
This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.
used
Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA
used
This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.
used
This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.
used
Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp
used
This JS EDM Wi-200s Erosion machine was manufactured in the year 2018 in Taiwan. It is equipped with a JS EDM control unit and has 5 axis.
used
This GF Form E600 Erosion machine was manufactured in the year 2018 in China. It is equipped with a GF AC FORM HMI control unit.
used
This SODICK AG40L erosion machine was manufactured in the year 2020 and has 355 production hours. It is equipped with a SODICK LN2 control unit. The machine disposes of a SVC circuit for superfine surfaces and graphite electrode machining. Contact us anytime for further questions.
used
This Zimmer+Kreim Genius 700 erosion machine was made in the year 2004 and includes a Chameleon tool changer type B. The measuring machine Vista Carl-Zeiss was made in the year 2003. All machines are connected.
used
This AGIE CHARMILLES CUT 20 Erosion machine was manufactured in the year 2008. It is equipped with a Charmilles CNC control unit.
used
This Exeron EDM 310 MF 20 Erosion machine was manufactured in the year 2008 in Germany. It is equipped with an Exeron control unit. The machine was fully retrofitted in 2023 with 6 month warranty.
used
This Mitsubishi Electric FA20-VS Erosion Machine from 2006 is a compact machine, operated through a Mitsubishi 64-BIT-CNC Control unit. Aside from its solid condition, the equipment stands out for its 1500-kilogram workpiece weight capacity.
used
This MITSUBISHI FX20K Wire EDM machine was manufactured in 1999 in Japan. The machine has a table of 1500 x 800mm and a max. workpiece weight of 800kg.
used
This Agie Agietron Integral 2 Erosion machine was manufactured in Switzerland in 1994. It operates for a max. workpiece weight of 400 kg and max. electrode weight of 100 kg.
used
This SODICK A 500 Erosion machine was manufactured in 2000 in Portugal. It has an X-axis travel of 600 mm, Y-axis travel of 350 mm, and Z-axis travel of 270 mm. It can support a maximum weight of 700 kg on the table. Contact us anytime for further information.
used
This HITACHI SEIKI 254Y Erosion machine was manufactured in the year 2003 in Japan. The machine has a wire feed rate of 20 to 300 mm/s.
used
This VOLLMER QW72 P Erosion machine was manufactured in the year 1997 and has 91446 operating hours. It is equipped with a VOLLMER PMC-System control unit. The machine has a spindle speed of 4000 rpm.
used
This Penta 650G CNC Erosion machine was manufactured in the year 2015 in Czech republic.
used
This Charmilles HD30CNC Erosion machine was manufactured in the year 2006.
used
This FANUC Robocut ALPHA-0B Erosion machine was manufactured in the year 1995. It is equipped with a Fanuc Series 16-W control unit and has 4 axis. The machine has a wire tension: 0-2500 g.