erosion wire used for sale

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package

wire electrode, welding wire, welding wire -Net weight: 15 kg -Number: 1x packages available -Price: per package -Weight complete: 15.6 kg/package

wire electrode, welding wire, welding wire -Net weight: 5 kg -Number: 1x packages available -Price: per package -Weight complete: 5.9 kg/package

wire electrode, welding wire, welding wire -Net weight: 9 kg -Number: 1x packages available -Price: per package -Weight complete: 9.5 kg/package

wire electrode, welding wire, welding wire -metal powder -cored wire -Net weight: 15 kg -Number: 87x packages available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, SG2 welding wire, welding wire -Small role -Net weight: 5 kg -Number: 16x package available -Price: per package -Weight complete: 5 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 26x package available -Price: per package -Weight complete: 15.6 kg/package

Wireless access point CISCO AIRONET 1200 AIR-AP1230B-E-K9 48 V DC 0.38 A unused ! dimensions (packaging): 440 x 230 x 230 mm

2.5-5 mm wire gauge up to 1200 springs per hour are possible Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not identifiable .

number of stapling heads: 1 serial no.: 8074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

Sodick VL400Q EDM Wire Cutting Machine Like New Machine is like new Number of working hours : 5000 (April 2022) X - Axis Travel 400 mm Y - Axis Travel 300 mm Z - Axis Travel 220 mm U, V Axis Travel 80 x 80 mm Wire Diameter Range (min ~ max) 0.10 ~ 0.30 mm Work Tank Dimensions (W x D) 860 x 690 mm Maximum Workpiece Weight 500 kg Distance From Floor to Table Top 900 mm

Due to the increase in production capacity and the incorporation of new equipment, we offer the following WEDM (wire electroerosion) machine for sale: Sodick AQ400L. Machine in operation: it can be seen and tested. Extras: it has a wire cutter and accessories for cutting with a Taperflex table (high inclinations).

Charmilles Robofil 310 CNC type Year: 1994 X axis Axis shift of 400 mm Axis Y axis shift 250 mm Z-axis travel 400 mm The stroke of the U axis is 400 mm The stroke of the V-axis 250 mm We attach 8 cartons of brass wire 0.25 and all the instructions including one in Polish

Charmilles Robofil 4020 Year 1996 Travel: X-450, Y-320, Z-270, U-100, V-100 Max cutting angle: 30 degrees Max workpiece weight: 500 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detal - 990 x 505 x 270

Agie Charmilles Form E 600 EDM Wire Cutting Machine C axis X, Y, Z axis: 600 x 400 x 400 mm Working table.: 800 x 600 mm Maximum workpiece weight:: 1000 Kg Machine is in like new condition

The machine has been standing still for a couple of years now, so it needs a complete overhaul, it is not possible to see it in operation. - tank dimensions: 1105 x 765 x 435 [mm] - maxi dimensions of the pieces: 1100 x 760 x 360 [mm] - maxi piece weight: 800 [kg] - strokes: X x Y x Z: 450 x 320 x 162 [mm] - U strokes: +/- 50 [mm] - V strokes: +/- 50 [mm] - solution: 1 [µm] - wire unwinding speed: 2 - 15 [m / min] - rake angle: +/- 30 ° - tank dimensions: 1150 x 900 x 2280 [mm] - tank capacity: 1000 [l] - dimensions: 3700 x 2700 x 2300 - weight: 4930 [kg]

Installed in August 2014 Regularly maintained Usually very small pieces are cut https://www.mitsubishi-edm.de/en/mvs-series-specifications.html

Agie Charmilles CUT30P EDM Wire Cutting Machine Axis movement: X, Y, Z : 600 x 400 x 350 mm Maximum workpiece size : X, Y, Z 1050 x 800 x 350 mm

Fanuc Robocut alpha-C600ib EDM Wire Cutting Machine Machine is in very good condition Maximum workpiece dimensions [mm]: 1050 × 820 × 300 Maximum workpiece weight [kg] : 1000

Accutex AU-500iA EDM Wire Cutting Machine Machine is in excellent condition Operating hours: 3000 ( May 2023) - Max. Work Piece 1000x600x295 mm - X, Y axis 560x360 mm - U, V axis 100x100 mm - Z axis 300 mm - Heidenhain digital bars - Transformator 110 V - 220 V - Weight 500 kg - AVS - Avto voltage stabilizator

X 550 Y 400 With 350 U 360 Full feedback - optical scales 0.0001 mm Table dimensions: 750x550 The internal dimensions of the bathtub: 1100x950x500 Max workpiece weight: 1000 kg Max weight of the electrode: 50 kg Machine weight: 6,440 kg IQ option

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 4.0 kg

Wire electrode, welding wire, welding wire, cored wire -Welding wire: MIG welding wire type S-Al Mg 3 -Diameter: 1.2mm -Dimensions: Ø 300/100 mm -Weight roll: 7.4 kg

Wire electrode, welding wire, welding wire -Manufacturer: Elga, protective gas wire electrode cored wire Elgacore DWA 50 Ø1.2 mm -Type: Elgacore DWA 50 Ø1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 5.1 kg

Extruder welding machine, plastic welding machine, extrusion welding machine -Manufacturer: Munsch, extruder welding machine type SKR -Voltage: 230V -Welding wire: 5 rolls of Röchling Polystone P.grau-Cop Ø 3 mm -Price/tax: complete -Transport dimensions: 600/500/H400 mm -Total weight: 22.6 kg

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight roll: 12.0 kg

Built in 1960 Wire stitching machine 1 stitching head electr. Drive Foot switch incl. base frame Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E

Sodick A325 wire EDM end of 1999 Used very little and in perfect working order. Partially revised Currently installed and connected, you can see it and try to work. Working field dimensions X350 x Y300 x Z220 mm Conical cut.

Key data: 8 mm

Wire straightener Mint condition For wire diameters of 9 - 15 mm

Key data: 7 mm

Wire straightener Heavy-duty design for large wire diameters New, unused For wire diameters from 7 - 15 mm Total length 1500 mm Weight: Approx. 250 kg

Control: Makino Generator: MGW-R Max.travel range: X 600 mm Y 400 mm Z 250 mm U x V axis travel +/- 75 mm Work tank dimensions: 920 x 600 mm Dialectric tank capacity: 900l Made in Japan

diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950

diameter range 1,9-2,5 mm nail length 32-57 mm output - pieces/min 1650

diameter range 1,9-2,5 mm nail length 32-57 mm output - pieces/min 1650

diameter range 2.2-3.4 mm nail length 55-90 mm output - pieces/min 1100

diameter range 2,0-3,2 mm nail length 50-88 mm output - pieces/min 1300

wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370

dia. range 0,5-3 mm width of band 40 mm number of slides 2

diameter range 2,0-3,2 mm nail length 50-88 mm output - pieces/min 1300

with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 1100

diameter range 2,0-3,2 mm nail length 50-88 mm output - pieces/min 1300

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 4

wire diameter 0,6-1,1 mm mesh width 3/4 inch working width 2100 mm number of strokes 115-125

wire diameter 0,7-2,2 mm mesh width 1/2 inch working width 2300 mm number of strokes 50-96,5

diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350

capacity / hour ca.: 8000 amount of capping heads: 8 working direction: right-left (CCW) Drive: inverter More then 300 machines new and second hand on our seema .de

Max number of nails per minute: 600 Max wire diameter: 3.15mm Min. wire diameter: 2.2mm Engine: a.) 5.5KW, 380V 50Hz b.) 220 V , 50 Hz Weight: 1970 Machine dimensions: 1995 x 1085 x 1070 mm