erika record used for sale

Accessories: Steel holder Multifix B Tip height 200 mm Top width 1000 mm Spindle speed 5 2520 U/min Turning diameter over bed 405 mm over slide 245 mm Offset bore Ø 500 mm Recording camlock Spindle bore 38 mm Longitudinal feeds 0.029 1.6 mm / Rev Plan feeds 0.022 1.25 mm / Rev Machine weight approx. 1500 kg

Angle welding Manufacturer: Diez Type: WS7050 Year of construction: 2018 Max product size: 500x400x240mm Foil rolls recording using a spiked roller

Cup brush -Type: TB 02 -Outer: Ø 100 mm -Recording: 22.2 mm -Speed: Max. 8500 rpm -Price: per piece -Number: 8x available -Weight: 1 kg/piece

The CEA ATM 18/18 was conceived to be introduced in the modern Pharmaceutical production line. It is placed after the filling and sterilization line, before the labeling and packaging line. The ampoules and/or vials are loaded manually on the loading plane of the ATM machine 18/18 by trays. The output of the rejected and approved ampoules and/or vials are respectively collected in separate trays. Formats: 1-2-5 ml Technical characteristics: • Dimension ampoules and bottles: Diameter Ø from 9 to 18 mm total height up to 100 mm • Mechanical speed: 18,000 vials/hour max. for 1 – 2 ml ampoule • Rotation speed: continuously adjustable from 500 to 3000 rpm • Power supply: 230V ± 10% 50/60 Hz 1Ph • The Client must guarantee a voltage fluctuation of no more than 10% • Absorbed power: 5 Kw • Loading/unloading plane height: 900 mm (adjustable ± 25 mm) • Dimens ...

Vertical machining center Cincinnati Millacron Traverse path x 1270 mm Y: travel 660 mm Z: travel 660 mm CNC control: Acramatic 850SX Table size: 1,370 x 660 mm Table load: 910 kg Rapid traverse x/Y/Z: 15,000 mm / min. Spindle speeds: 60-8,000 rpm. Spindle recording: ISO 40 Distance from spindle - table min/max: 150/880 mm Tool changers: 21 items Equipped with:-cooling device -Hand Council operation -Complete instructions Country of origin: England Spindle motor: 9 kW Machine weight: 8.000 kg Machine WxDxH: 3,600 x 2.900 x 3.000 mm

Tailstock, counter bearing for dividing head, dividing attachment -Height: adjustable -Recording: top -Dimensions: 245/280/H200 mm -Weight: 28 kg

-Digital display -Accessories available. Clamping surface 1100 x 300 mm Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Weight of the machine CA. 2050 kg

Facilities: -Console machine with cantilever -Pneum.. Workpiece stops with double-acting cylinders -Pneum.. Assembly AIDS -additional editing fields front (4-field machining) -Handheld -C axis -Swivel sawing unit to the grooves in the X - and Y-direction -Horizontal milling unit for lock box -Plate tool changer driving with - laser positioning aid for the cleaner -autom. Central lubrication system Technical data: -Traverse path Max X: 3.259 mm -Traverse path Max Y: 1,483 mm -Maximum Z: travel 325 mm -Speed Max x: 75 m / min -Speed Max Y: 75 m / min -Maximum Z: speed 30 m / min -Workpiece thickness max: 100 mm -Spindle motor power: 7,5 kW -Main spindle speed: 1000-18000 RPM -Recording of main spindle: HSK 63F -Recording spindles: M10 with 11 mm fit -Number of vertical spindles: 14 pieces -Number of horizontal twin spindles in the X direction: 1 piece in the Y-d ...

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

We offer you here a stop machine with 40 liters boiler-with attachment (with ruettel function recording for attachment is not rigid)-delivery at an additional cost possible

Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm

Digital display Heidenhain Thread cutting device Automatic pinole feed Electr. adjustable head (height) Coolant pump Table size 600 x 250 mm Recording MK 3 Speed Continuous

FOR SALE... 2 SET COMPLETE MWM D234 V06 ENGINES; HAVE A GDY WE VE 2 SETS COMPLETE MWM D234 V06 ENGINES AT OUR STOCK ENGINE USED AS GEN SET BEFORE.. WE DISMANTLED ALTERNATORS. ENGINES ARE FULL MARINE DESIGN ENGINE. PLS FIND SPEFICATIONS AT BELOW. ENGINES TESTED IN RUNNING CONDATION . WE HAVE VIDEO RECORD. TYPE D234 V06 SERIAL No. 234.06.01442 / 234.06.01440 KW 101 RPM 1500 IF YOU'VE ANY FURTHER QUESTIONS. PLS LET ME KNOW Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Hydraulic pump, oil pump, gear pump -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Mobile excavator TEREX / Atlas Type TW160 Y.O.M. 2010 approx. 6,300 hrs - Hydraulic adjusting boom - Quick-change system for shovel - Gripper piping - Rear-view camera - Clearing sign (unused) available. - With Rototilt (shovel can be rotated and tilted 360 degrees. Additional grippers e.g. for setting telephone poles or lanterns. (last picture) Video can be submitted on request. The clearing sign was dismantled because the excavator was used as a two-way excavator with a rail handle (without DB approval). Mechanically very little stressed excavators. The enclosed clearing shield must be adjusted to the recording. Visually and technically good condition. Bdxbjqofbb Tires bad (can be renewed on request at an extra cost)

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

Why manufacture small parts on large, expensive CNC machining centers when it does a small CNC machine for a fraction of the price as fast and true to size ? Brass, copper , steel, stainless steel and many other materials can be processed . See information and seek non-binding offer or view a demonstration at our premises , personalized with your material and your record !; ready for operation

Hydraulic pump, oil pump, gear pump -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Milling tool holder arbor -Recording: PK50 -Mill: Ø 32 mm -Weight: 7 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Boring/chiselling -SDS Plus: recording -Transport case -Weight: 5 kg

-Three jaw Chuck ø 200 mm -Multi fix steel holder -Fixed bezel -Revolving bezel Centre height 175 mm Top width 1000 mm Speed 40-1800 rpm Spindle bore ø 52 mm Recording camlock 6° machine dimensions 2300 x 1100 x 1400 mm Weight approx. 1400 kg

Siemens Panorama Dental Recording Device Orthopantomograph PALOMEX OP 10 E with tube SR 90/15 FN 0.6 • Before takeover, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "IST" state from the freiberg (EXW), Saxony, Germany, and prepayment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation and configuration of the system or parts must be carried out by a specialist or technician authorized by the manufacturer! • The offer is subject to interim sale.

Ernest Bodmer type: MINIV - 350 (tool measurement) Serial number: 3152 ISO/50 Y2d0vum9 The HSK recording is not included. Measurements L x B x H 1250 x 900 x 1900 Tool measuring machine is fully functional. Tool measuring machine is in perfect condition. We love to hear from you.

Service station - Hoftankstelle - Diesel filling station with 5,000 litres capacity, brand new, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings Equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue.  ...

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

two-armed drill, rotary drill, magnetic drill -Recording: MK2 -Nominal consumption: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg

Used Fachboodenregale (a plug-in system) are available for sale. technical data: -Number of frames: 5 -Frame height: 2500 mm -Frame depth: 500 mm -Number of subjects per compartment: 7 -Tray width: 1400 mm -Specialist load capacity: 40 kg -Length of the offered shelf approximately 5800 mm Additional information: A large number of the offered goods available - is now available from stock. Other configurations of racks possible. Price â?¬290 net plus VAT for offered shelf Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal consumption: 620 W -Boring/chiselling -SDS Plus: recording -Weight: 3.5 kg

Tailstock counter bearing for dividing head, dividing attachment -Tip height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg

for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 320 mm -Recording thread: Ø 60 mm inside -Weight: 30 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 410 mm -Recording: see photos -Through hole: with thread M72x4 -Weight: 38 kg

Scanners Manufacturer: Kodak Type: i820 Technical data Optical resolution 300 dpi Tonal output resolution: 200Â EUR \"400 dpi color / grayscale: 100Â EUR\" 300 dpi MAX DOC size 305 x 768 mm (12 x 30 in.) MIN DOC size 64 x 64 mm (2.5 x 2.5 in.) FEEDER 1,000 sheet QuickSet elevator with a self reset mechanism to record variable batch sizes Daily Scancvolumen: 60000 There are 2 common devices. The price is for 1 unit. All information without guarantee

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock: comes from Heycop 3UN/2000 lathe -Tip height: 312 mm -Recording: MK5 -Dimensions: 800/307/H435 mm -Weight: 144 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 255 mm -Recording: MK4 -Dimensions: see drawing with the pictures -Dimensions: 600/220/H410 mm -Weight: 84 kg

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Through hole: Ø 28 mm -Recording: approx M77 x 6 -Weight: 41 kg

CNC machining tool Morari Swivel unit with recording ISO-30 maximum speed 15000 rpm with test certificate Built in 2000 Excellent condition, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine vise, sturdy vise, drill vise -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm -Dimensions: 460/160/H120 mm -Weight: 36 kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg

Tailstock, counter bearing for dividing head, dividing attachment -Top height: 300 mm -Recording: MK2 -Drawing: in the photos -Dimensions: 450/120/H330 mm -Weight: 21 kg

Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.

Drilling capacity in steel / cast iron 50/65 mm Drilling capacity in steel 70 mm Feed 0.1 - 0.54 mm / Rev Speed 62-1240 RPM Recording MK 5 spindle stroke (drilling depth) 240 mm Usable projection 385 mm Table 800 x 680 mm Spindle head diameter 70 mm Height 2350 mm the machine

New planboard Roehm 600 mm Direct recording Camlock - 8

Tool holder, milling holder, milling tool -Adjustment: SK50 -Recording inside: Ø 28 mm -Weight: 2.9 kg/piece