erika record used for sale

x-travel: 750 mm y-travel: 250 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1270 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 175 - 520 mm rapid traverse: Z Achse 660 mm/min throat: 0 - 550 mm total power requirement: 2,2 kW weight of the machine ca.: 1400 kg range L-W-H: 1715 x 1470 x 1660 mm current new price ~ 13.500 euros Special price on request The universal milling machine UWF 110 is suitable for this purpose of light and medium-heavy milling work. Thanks to their great Versatility and easy conversion, it can be used in workshops for successfully processing small and medium-sized series be used. Furnishing : - Universal milling head, adjustable to all angle positions - Swivel control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustab ...

Set up for ALU/PVC and ALU/ALU operation • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamped • Cover film-Ø max. 240mm, core-Ø 76 mm, pneumatic clamped • Adhesive bonding point detection for sealing and forming film • Product feed by deticated feeder Uhlmann SimTab 2.1 for tablets/capsules • Forward feed after forming and sealing station • Tear and pore control for forme film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC forming film • Heating station with extraction for the use of PVDC film • Mechanical forming station for ALU forming film • Filling control VisioChrom color with separa ...

• Vacuum mixing and kneading system with 2 planetary mixing shafts and 1 wall/floor scraper. • Particularly suitable for the preparation of highly viscous pastes and sealing compounds, consisting of a high-speed (speed 200-2,500 rpm) and a low-speed agitator (speed 20-200 rpm) • Speed planetary disc 7-84 rpm • Mixing tools 2x cross beam and 2x butterfly, possible combinations cross beam on both sides, cross beam and butterfly, butterfly on both sides • High-speed mixing shaft with reversal of direction of rotation • 2 containers each with a total capacity of approx. 18 l, usable capacity 5-15.0 l (depending on product) • Container diam. 270 mm, depth 316 mm, total height 335 mm • Heating/cooling jacket, max. operating temperature 90°C, without heating/cooling device, designed for factory water • Hydraulic container lifting/lowering device • Press-out device, ...

Sold without vice and accessories! Recording set, are not included in the price, but can be sold against bidding! The machines can be inspected by arrangement, be tried out and demonstrated! Shipping by Forwarding possible

Olympus Iplex IV9420RT Videoscope in neat working condition Scope diameter: 4 mm Scope length: 2 m Angle: 130° Illumination: Ultra-high intensity LED illumination Image manipulations 5X digital zoom, 10 step digital brightness control Gain control 3 step adjustable gain control with exclusive WiDER™ brightness level balancing technology. Sharpness control 4 step adjustable sharpness control Saturation control 3 step adjustable control of color saturation Recording media USB flash memory (1GB standard, compatible with recommended USB flash device) Still image recording Resolution -- H768 x V576 (pixels) Recording Format -- Compressed JPEG format Video recording Resolution -- H640 x V480 (pixels) Recording Format -- AVI MPEG-4 format, Can be played on the Windows Media Player. #8062 Net prices plus VAT

Index GFG 450, Built in 1996, Control Index C 200 - 4, Travel X/Z 430/545 mm, Circulation Ø over bed carriage max. 425 mm, Bar passage 100 mm, 2 revolvers 8-speed / 6-speed, turret 1 powered tools, Recording VDI 50 , C axis 0.001°, Conveyor 4-stage transmission up to 2,250 rpm, Three-jaw chuck 315-82, Full-clamping cylinder OVS 150, Accessories

Key data: 3000 mm, 1200 mm, 800 mm

Processing Center Universal Fabriakt: Cheto Type: 9700 H 6 axles Year of construction 2014 Technical details x-axis: 3000 mm y-axes: 1200 mm z-axes: 800 mm Table size 1800x1800 mm Positioning type 360,000 pos. Max. alternating load 30 ton W stroke bore 1700 mm B Table rotation 360.000 pos. A Tilt-Rotation +35º/-25º Max. drilling stroke W+Z 1700+800 mm Drilling capacity ø5-40 mm Spiral Tapping Standard Tapping M34 Milling 500 cm3/min Speed 0-6000 rpm. Recording ISO 50 DIN 69871 Power 24/38 kW Torque 214/338 Nm Total weight 39 Ton Footprint (WxL) 9520x7410 mm Total weight GDATC 52 Ton

Hanwha STL 38 sliding head lathe :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 38mm Headstock stroke (Z1): 320mm - Main spindle speed: 8000 - Number of linear axes: 8 - Number of fixed tool positions on the tool plate: 5 Number of driven tool holder plate tool slots: 4 Rapid feeds for linear axes X Y Z: 32m/min High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 tool-holder-type-first-turret-slide: VDI 30 X-axis-stroke-first-turret-slide: 140mm Y-axis-stroke-first-turret-slide: + - 50mm Sub-spindle: yes Sub-spindle speed: 8000 Power against spindle: 11Kw Bar clearance: 38mm Counter spindle stroke Z : 320mm Number of fixed rear tools: 4 Refrigerant Used: Neat Oil Bar Feed ...

Torque wrench, torque tool -Recording: 1/2 inch -Torque: 4-13 mkp -Dimensions: 630/110/H40 mm -Weight: 1.2 kg

Machine reamers, reamer, reaming tool, fitting knife blade set, rivet reamer, rivet reamer -different manufacturers: TITEX PLUS, UNISTO... -Recordings: MK2/MK3/MK4 -different sizes: 13-40 mm as shown in the photos -Sale: only complete -Weight: 11 kg

Machine reamers, reamer, reaming tool, fitting knife cutter set -Number: 10x reamers -Diameter: 5x Ø 35.5 mm H7 -Diameter: 5x Ø 45 mm H7 -Recording: MK -Sale: only complete -Weight: 24 kg

Reamers, twist drills, drill bits, spiral countersinks, three-edged bits, twist drills -Three-edged -Diameter: 28-40 mm -Recording: MK3 -Type: HSS -Number: 37 pieces -Sale: only complete -Weight: 7.5 kg

Crane grab, hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 695 mm -Shovel length open: 1720 mm -Total height: 750 mm -Recording: 59 x 65 mm -Weight: 293 kg

Tool holder, milling holder, milling tool -Number: 7x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 28 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Fixed point, fixed center point, fixed Morse taper, fixed centering point -barrel tip: shaft-mounted -Recording: see pictures -Weight: 1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 x 40 mm -Recording diameter: 35 mm -Quantity: 2 cutters -Price: complete -Weight: 16kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part from an R&E -Recording output: MK5 -Recording input: gear -completely swiveling -Rezes recording: mm -Pitch circle: mm -Movable stroke: approx. 150 mm -Dimensions: 720/630/H740 mm -Weight: 400 kg

adjustable gear motor, variable speed gear motor, electric motor -Gear case broken see photo -Motor power: 3 kW -Speed range: 8 to 48 rpm -adjustable -Construction: B3 -Drive shaft: mm -Height drive shaft foot: 130 mm -Recording holes: mm -Dimensions: 700/700 / H250 mm -Weight: 119 kg

Hydraulic pump, oil pump, gear pump -Recording wave: -Price: per piece -Number: 2x available -Dimensions: 170/120/110 mm -Weight: 4.3 kg

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: 110 mm -Length: 200 mm -Insertion height: 40 mm -Number: 9 steel holders available -Price: per piece -Weight: 4 kg/piece

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -Recordings: MK -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 68 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod holder: Ø 75 mm -Recording cylinder: Ø 60 mm -Ideal for building a hydraulic press -Applicable: universal -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1100 mm -Recording piston rod: Ø 53 mm -Recording cylinder: Ø 60 mm -Ideal for building a hydraulic press -Applicable: universal -Dimensions: 1650/160/H120 mm -Number: 2x cylinders available -Price: per piece -Weight: 225 kg

Pipe clamping system, clamps for butt welding device, butt welding device, mirror welding device, pipe welding device, assembly device for pipes -Recording from: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg

Pipe clamping system, clamps for butt welding device, butt welding device, mirror welding device, pipe welding device, assembly device for pipes -Recording from: 110-400 mm -Angle: 22.5 °/45 °/90 °/180 ° degrees -Double clamping device: for pipe mounting -Transport box -Dimensions: 830/290/H260 mm -Weight: 50 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 105 mm -Hole circle: Ø 135 mm -Weight: 18 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -exciting: centric -Interchangeable jaws: soft -Weight: 22 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 82 mm -Hole circle: Ø 105 mm -Weight: 14 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Weight: 6 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -different recordings: 4 -Manufacturer: Comet -DIN: 69880 -partly with: internal water cooling -Chisel holders: Ø 63/63/80/100 mm -1x adapter: Ø 50 to Ø 63 mm -Chisel length: 750 mm -Sale: only complete -Price: complete -Weight: 110 kg

Gear cutters, module cutters, gear cutters, module cutters, tooth form cutters -Diameter: 63 mm -Height: 40 mm -Recording: 22 mm -Number: 2x milling cutter fixing disc 650.054.06A SPAN. 5 ° EV4CO -Price: complete -Sale: only complete -Weight: 1.5 kg

Machine reamers, reamer, reaming tool, fitting knife cutter set -various sizes: Ø 13-33 mm -various: recordings -Sale: only complete -Weight: 7.2 kg

Reamers, twist drills, drill bits, spiral countersinks, three-edged bits, twist drills -Three cutter -Diameter: 17.75mm -usable length: 150 mm -Recording: MK2 -Type: HSSE -Number: 19 pieces -Sale: only complete -Weight: 6 kg

Reamers, twist drills, drill bits, spiral countersinks, three-edged bits, twist drills -Three cutter -Diameter: 16.8mm -usable length: 120 mm -Recording: MK2 -Type: HSS -Number: 24 pieces -Sale: only complete -Weight: 7.5 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 43 pieces -with: ring groove -for: SK50 recordings -Thread: M20 -Price: complete -Weight: 13.5 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Number: 24x different recordings -Manufacturer: from Komet and ES -Sale: is only sold as a whole -Price: complete -Weight: 45 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal consumption: 600 W -Drill -SDS Plus: recording -div. drill -Transport case -Price: per piece -Number: 1 piece -Dimensions case: 480/380/H130 mm -Weight: 6 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK2 -Nominal consumption: 1150 W -Connection: 230 volts -Max. Drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK1 -Nominal consumption: 400 W -Connection: 230 volts -Max. Drill diameter: 15 mm -Weight: 7 kg

Tool holder, tool magazine, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg

Tool magazine, tool holder, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200V -Recording diameter: 16 mm -Weight: 5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Recording diameter: 20 mm -Weight: 4 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -1x motor: 0.85 kW 8400 rpm at 150 Hz -Voltage: 400 V -Recording diameter: 14 mm -Weight: 10 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Recording diameter: 16 mm -Motors: some with right or left thread -Number: 9x motors available -Price: per piece -Weight: 3 kg/piece

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Recording diameter: 16 mm -Number: 13x motors available -Price: per piece -Weight: 3 kg/piece

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Recording diameter: 20 mm with feather key -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece