erika record used for sale

Planscheibe ROTO RECORD PL 315x5 ( PL315x5 ) TGL 30-22313 n: max. 7100 rpm outer Ø: 315 mm height with jaws: 125 mm bolt circle Ø (chuck) : 105 mm bore Ø: 78 mm mounting flange: Ø 79 / 81 mm, depth: 13 mm ( conical ) groove width: 14 / 24 mm groove depth: 24 mm with one-piece reversing jaws used, tested ! Dimensions: 315 x 315 x 125 mm

Planscheibe ROTO RECORD PLV 400x8 ( PLV400x8 ) TGL 30-22313 / n: max. 650 rpm outer Ø: 400 mm height with jaws: 135 mm bore Ø: 108 mm bolt circle Ø (chuck) : 172,5 mm 4x threaded hole: M16 x 2.0, depth: 45 mm mounting flange: Ø 135 / 140 mm, depth: 18 mm (conical ) groove width: 14 / 25 mm groove depth: 24 mm with one-piece reversing jaws and 2x lathe chuck wrench used, tested ! Dimensions: 405 x 405 x 135 mm

Circular Dividing Table, Round Dividing Table, Rotary Table RECORD Ø 300 mm Table height: 122 mm Slot size: 16 / 27 mm used, tested ! Dimensions: 500 x 470 x 160 mm

Machine vice WMW, ROTO RECORD SN 160 jaw width: 160 mm jaw height: 55 mm wingspan: 0...100 mm used, tested ! Dimensions: 460 x 165 x 125 mm

3-jaw combination chuck, three-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD Outer Ø: 310 mm bolt circle Ø: 280 mm bore Ø: 98 mm height with jaws: 160 mm used, tested ! Dimensions: 310 x 310 x 160 mm

Machine vice WMW, RECORD SPANNZEUGE ZHD 200-2 Jaw width: 200 mm jaw height: 50 mm wingspan: 0 - 250 mm used, tested ! Dimensions: 540 x 245 x 125 mm

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD outer Ø: 315 mm bolt circle Ø: 234.5 mm bore Ø: 98 mm height with jaws: 155 mm (without screws) with second set of jaws ! used, tested ! Dimensions: 320 x 320 x 230 mm

Faceplate ROTO RECORD PLV 500x8 TGL 30-22313 Outer Ø: 500 mm bolt circle Ø : 170 mm bore Ø: 135 mm n max: 560 rpm Dimensions: 500 x 500 x 165 mm

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD outer Ø: 310 mm bolt circle Ø: 290 mm bore Ø: 98 mm height with jaws: 130 mm used, tested ! Dimensions: 310 x 310 x 130 mm

Face plate ROTO RECORD outer Ø: 500 mm bolt circle Ø : 170 mm bore Ø: 135 mm with screws for groove ! Dimensions: 500 x 500 x 165 mm

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD outer Ø: 375 mm bolt circle Ø: 235 mm bore Ø: 130 mm height with jaws: 192 mm (without screws) used, tested ! Dimensions: 375 x 375 x 267 mm

Webo Gradua 23 Precision Column Drilling Machine Drilling capacity in steel (diameter): 30 mm Projection: 330 mm Drilling stroke: 135 mm Operating voltage: 380 V Recording MK: 3 Speed: 90 - 2000 rpm. Feed rate: 0.1 - 0.3 m/min Workpiece height - max.: 600 mm Clamping surface: 450 x 350 mm Gear stages: 2 Distance spindle nose and table: 30 - 600 mm Column diameter: 200 mm Coolant device: available Weight: 0.8 t Total power requirement: 1.1 kW Right-left rotation, adjustable drill feed (0.1; 0.2; -0.3 mm/rev), height-adjustable, Work table, oil level indicator More items - new and used - can be found in our shop! International shipping costs on request!

Planscheibe WMW, ROTO RECORD P 400x8 ( P400x8 ) TGL 30-22313 Outer Ø: 400 mm bolt circle Ø : 172,5 mm height with jaws: 138 mm bore Ø: 136 mm groove width: 14 / 25 mm groove depth: 24 mm used, tested ! Dimensions: 500 x 500 x 170 mm

Agilent G 1362 A RID Detector Refractive Index Range 1.00-1.75 RIU Measurement Range +/- 600x 10-6 RIU Sample Cell 8 ul Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN

4-jaw combination chuck, four-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD Outer Ø: 310 mm outer Ø (chuck flange): 330 mm bolt circle Ø: 234 mm bore Ø: 105 mm height with jaws: 220 mm (without screws) used, tested ! Dimensions: 330 x 330 x 280 mm

Recording HSK F63 for WEEKE max. drive speed 10,000 rpm Gear ratio 1:1.48 max. output speed 15,000 rpm for collet ER 32

2-jaw chuck, two-jaw chuck with round jaws ROTO RECORD outer Ø: 160 mm bolt circle diameter: Ø 170 mm Tension pulley diameter: Ø 60 mm bore: Ø 42 mm height with jaws: 95 mm used, tested ! Dimensions: 160 x 160 x 95 mm

For sale: Japanese Okuma CNC lathe type LU-300M, equipped with an OSP-E100L controller including IGF dialog programming. This CNC lathe is equipped with an upper and lower turret. The upper turret has 12 positions and driven positions. The lower turret has 8 positions and no driven positions. The recording is a VDI-40 recording. The machines are equipped with a tool presetter and a tailstock. The turning diameter above the bed is 530 mm, the maximum turning diameter is 339/180 mm, with upper and lower turret. The maximum turning length is 570 mm. The Z-axis movement is 640 mm. The maximum speed on the main spindle is 3,800 rpm. Spindle nose mount A2-6, chuck size 250 mm, rod passage 50.8 mm. Main engine power 22 kW. The machine also has a workpiece collecting device and a chip conveyor with right-hand ejection. The machine can still be viewed under power and will be available in Octo ...

Machine vice, rotatable and tiltable WMW, ROTO RECORD SN 100 jaw width: 100 mm jaw height: 32 mm wingspan: 80 mm on table with graduation 2 planes 360° rotatable 90° tiltable used, tested ! Dimensions: 300 x 115 x 165 mm

Clamping drive WMW, ROTO RECORD ESpU 12 R Engine: KMR 71 K 4 E 0,0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: 14 x 14 mm, square profile Flange diameter: Ø 142 mm bolt circle diameter: Ø 142 mm, 4x threaded hole M6 x 1.0 used, tested ! Dimensions: 255 x 195 x 142 mm

Record Panda1000 flow wrapper Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph

Milling head, with clamping drive and coupling device WMW, HECKERT FSS400 Tool holder: SK50 360 ° rotatable inner flange diameter: Ø 250 mm outer flange diameter ( inside / outside ): Ø 429 / 585 mm ring groove diameter ( inside / outside ): Ø 480 / 502 mm Groove width: 22 / 36 mm Hookers: 42 mm Clamping drive: ROTO RECORD EDU I80 HDR coupling: EK IH used, tested ! Dimensions: 1000 x 590 x 450 mm

tilting table, clamping table RECORD clamping area: 290 x 285 mm 90° Tiltable 360° rotatable 3 grooves groove width: 14 / 25 mm groove depth: 21 mm mounting holes in base plate: Ø 17 x 20 mm ( U-shape ) used, checked! Dimensions: 380 x 370 x 175 mm

Sahnezapfer, Fortuna, Type Record

Base plate for lathe chuck ROTO RECORD DHK 315 bottle ( lathe chuck side ): Ø 265 mm bolt circle ( lathe chuck side ): Ø 290 mm, 3x bore: Ø 13.5 mm central bore: Ø 50 mm countersunk holes (machine side): Ø 19 mm, depth: 21 mm mounting holes: Ø 18 x 40 mm ( U-shape ), hole spacing: 330 mm used, tested ! Dimensions: 400 x 320 x 40 mm

Turntable, rotatable base plate for machine vices WMW, ROTO RECORD D 125 outer ring: Ø 115 / 166 mm inner ring: Ø 90 mm bolt holder: Ø 25 mm groove width: 12,5 / 21 mm groove depth: 20 mm groove (bottom): Width. 20 mm, depth: 6 mm with graduation 4x slotted hole: Ø 17 x 47 mm 2x U - hole: Ø 16 x 27 mm New ! Dimensions: 233 x 170 x 28 mm

Tension lock, installation clamping lock, side wall lock RECORD H 206 N Length: 300 mm Width: 120 mm Material: Steel Surface: Galvanized Closure type: Tension lock with load pressure protection New ! Dimensions: 335 x 120 x 30 mm

Planscheibe ROTO RECORD PL 315x6 TGL 30-22313 Outer Ø: 315 mm bolt circle Ø : 133.5 mm bore Ø: 100 mm n max: 710 rpm New ! preserved ! Dimensions: 315 x 315 x 125 mm

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

Semi-automatic, Fabr. Schmidt, Erika 2

3-jaw chuck, three-jaw chuck ROTO RECORD EF 250 Outer Ø: 250 mm bolt circle Ø : 225 mm bore: 80 mm height with jaws: 140 mm Clamping process via rotatable base plate ! with interchangeable jaws ! used, tested ! Dimensions: 250 x 250 x 140 mm

4-jaw chuck, four-jaw chuck, lathe chuck WMW, ROTO RECORD DH 375 x 4-III TGL30-2332 n: max. 1100 rpm < br /> Outer Ø: 375 mm Centering Ø: 320 mm bolt circle Ø (chuck) : 345 mm bore Ø: 140 mm height with jaws: 137 mm with lathe chuck used, tested ! Dimensions ( lathe chuck ): 375 x 375 x 137 mm

Agilent G 1321A Fluorescence Detector Ex Monochromator range 200 – 700 nm Em Monochromator range 280-900 nm Wavelength characteric Repeatability +/- 0.2 nm Accurcacy +/- 3 nm Flow cell 8μl Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN Remote: ready, start, stop and shut down signals

Lock case milling unit 2 outputs Recording HSK F63 for WEEKE Max. drive speed 10,000 rpm Gear ratio 1:1.48 Max. output speed 15,000 rpm Lock case cutter holder for collet ER 32 Faceplate cutter holder for collet ER 16

range L-W-H: 790 x 460 x 960 mm weight: 70 kg : 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4 premium ratchet. 1/4 knee joint 45 mm. 1/4 extension 100mm. 1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8 premium ratchet. 3/8 knee joint 55 mm. 3/8 extension 150mm. 3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2 premium ratchet. 1/2 knee joint 75 mm. 1/2 extension 125mm. 1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22 ...

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

Key data: 1300 mm, 600 mm, 700 mm

Matec 30 L, Year of construction 2010, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,

Key data: 260 mm, 400 mm

Machine Details Stock-No. 1105-03932 Type of machine CNC Lathe - Inclined Bed Type Make TSUGAMI Type MO8 DE Year of manufacture 2017 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time IMMEDIATELY Freight base ex stock HAGUENAU FRANCE Technical details turning diameter 260 mm turning length 400 mm control FANUC Oi TD Spindle Bore: 66 mm turning speed range - spindle 4500 rpm Feed Range - Turret / Stepless 1 - 12000 mm/min Rapid Traverse 24/27 m/min tool taper direct recording total power requirement 30 kW Weight of the machine approx. 5.6 t dimensions of the machine approx. 2500 C 1850 X 1750 mm Additional information CNC FANUC C AXIS AND MOOWING TOOLS VERY NICE tailstol Chip Convoyeur turret 12 positions

Key data: 1300 mm, 600 mm, 700 mm

Matec 30 L, Year of construction 2011, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,

Number of motors: 2 Stück 0: 3000 mm Control: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----------------------------------------------------- For wooden glazing beads, sash bars, profile strips, aluminum strips, etc. Pos. 1.1 article number 942.5103 HECHT Exenso DS350E - Working length 3000 mm - Pivoting range 22.5° (inside) to 135° (outside) - right head moveable - Saw blade holder Ø 350 mm - incl. 1 pc center support. - Pneumatic clamping of the aggregates. - Positioning control Exenso DS3 with touch panel 15 display in the dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of the cutting data by hand - Processing data from a cutting list (data set by default) - Processing of measuring rod data (radio caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - ...

Pusen UTV-100 Imaging System for MDH Ureteroscope The UTV-100 HD quality imaging system for use with the reusable MDH ureteroscope includes a display and video processor with video output for a second HD display (not included). Resolution 1024x768 Display size 12.1" Video Interface RCA, HDMI Memory: 8 GB Recording: Over 500 images, or 30 minutes of video Dimensions 315mm. 308mm. 187mm Weight 4.3 kg  Condition: Used, Kratzer Bilschirm You can find the right PV210 SDI image processing processor in our shop! International shipping costs on request!

Manufacturer: TECNO VIBRAZIONI - Year of construction: 2006 - Type: 28482 - Dimensions: 2100x900x2900mm - Strap width: 200 mm - Recording size: 700x700mm - Output size: 200x130mm - Transport speed: 6.0 m/min - Electrical data: 400V; 0.18 W; 0.7A

Manufacturer: Maffel Erika, Type: Erika 60, kW output per motor: 1800 Watt, FREE TEXT: Maschine läuft ohne Anschläge 220 Euro inkl.Mwst,

Manufacturer: Böhl Wickelmaschine, Type: Meister S 100 +FM, Year: 2005, Control: ESA, Work piece width min-max mm: 300-850, Min.-max. workpiece length in mm: 1500, Min.-max. workpiece height in mm: 50-500, Belt conveyor: 6 Meter vorlegeband, Ausrichtstation: yes, Width:165 to 250 mm: yes, Automatic product recording: yes, Belt tension adjustable: yes, Function repeat: yes, Min. cycle rate: 4, Feeding belt L x W x H mm: 2500, Year :2005

tool adaptor: VDI 30 weight: . kg material: . VDI 30 recordings 65 piecesThe technical. Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of business and sales apply exclusively. About us More than 400 of our own machines in the warehouse Over 12,000 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: VDI 40 weight: . kg material: . VDI 40 recordings24 piecesThe technical. Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of business and sales apply exclusively. About us More than 400 of our own machines in the warehouse Over 12,000 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Böhl, Type: BSB-80-SX , Year: 1997, Control: Siemens, Work piece width min-max mm: ca 50-730, Min.-max. workpiece length in mm: 750, Rollendurchmesser-min-max mm: 800, Max. roller weight kg: 6, Automatic product recording: yes, Sealing unit: yes, Belt width: max.125, Belt tension adjustable: yes, Function repeat: yes, Feeding belt L x W x H mm: ca.4500, Year :1997

tool adaptor: VDI 40 weight: . kg material: . VDI 40 recordings and driven tools21 piecesThe technical. Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of business and sales apply exclusively. About us More than 400 of our own machines in the warehouse Over 12,000 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: VDI 40 weight: . kg material: . VDI 40 recordings and driven tools 18 piecesThe technical. Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of business and sales apply exclusively. About us More than 400 of our own machines in the warehouse Over 12,000 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Böhl Wickelautomat , Type: SV 1500, Year: 1993, Control: Siemens S 5, Work piece width min-max mm: 300-1200 , Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 20-900, Belt conveyor: yes, Aligning station: no, Width:165 to 250 mm: yes, Min-max roller diameter mm: 250, Automatic product recording: yes, Belt inlet control: yes, Function repeat: yes, Feeding belt L x W x H mm: ca 1500, Feed out belt L x W x H mm: ca.1500, Foot switch: Handschalter, Year :1993