136,842 used machines on RESALE, but how to find them? Machine Search
Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A1-51368-88
Equipped with: hydraulic unit, control, foot control and several sets of press jaws. Auction-ID: A1-41281-257
Pressure washer Brand: DeWalt Model: DXPW001M Type: Cold Water Pressure Washer Working pressure: 130 bar Water output: 390 litres/hour (6.5 l/min) motor power: 1800 Watt (1.8 kW) Connection: 230 Volt Pump: HRM. A wobbleplate – aluminum pump head with 3 stainless steel axial pistons Hose: 10 meter high-pressure hose with integrated reel Lance: spray lance (with lance holder on the side) Frame: powder-coated steel frame Hoods: impact-resistant BASF plastic hoods Wheels: Durable rubber wheels Ø185 mm Accessory holder: Firmly built-in holder Total stop: Yes Thermal protection: Yes Self-priming: Yes Max. water temperature: 50 °C Use: Medium Duty – suitable for weekly use / 4 hours per day Weight: 15.9 kg Condition: unused, in the original packaging Auction-ID: A1-51368-268
Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A1-51368-193
incl. \"Nederman\" hose reel and control cabinet; on plastic pallet Auction-ID: A1-50597-165
Petrol pressure washer Brand: Kremer Working pressure: 170 bar High-pressure hose: 10 meters of high-pressure hose Capacity: 540 liters per hour Engine: 4-stroke petrol engine Start: Pull starter Power: 4.8 kW Speed: 3400 rpm Nozzles: 5 nozzles Equipped with: Detergent tank Includes: Suction hose with water filter Features: Large wheels, soap tank, hose reel... Condition: Unused in the original packaging Auction-ID: A1-51368-86
equipped with filter; 12 Volts; mounted on wall board; Auction-ID: A1-50707-31
Stainless steel steam melter, usable capacity from 50 to 300 litres. Equipped with: - Double-jacketed tank - Domed bottom - Central drain with front outlet and 26 mm diameter valve - Leak-proof lid with 4 locks - 1 control window with 140 mm diameter lighting - 1 pressure breaker - 1 pressure supply - 1 safety valve - 1 power tap diameter 26 mm - 2 power outlets with a diameter of 20 mm Steam or hot water heating Mounted on casters Interior dimensions of the tank: - Diameter: 800 mm - Height: 800 mm Capacity: - Maximum pressure: 1 bar - Maximum temperature: 100°C Auction-ID: A1-51318-297
High Pressure Metal Hose Reel Brand: Kremer Length: 15 meters Max. pressure: 280 bar Hose: braided hose with quick couplings Equipped with: auto-stop function Suitable for: Wall mounting Condition: Unused and in the original packaging Auction-ID: A1-51368-84
garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A1-51368-226
Brand: Kremer Type: KR-4510HW Working pressure: 110 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: tank for detergent Boiler: diesel-fired Heat Recovery: 42 kW Capacity: 600 liters per hour Connection: 230 volts Electric power: 3 kW Speed: 2800 rpm Weight: 100 kg Includes: high-pressure gun, high-pressure hose, brass coupling, 4 different spray nozzles and manual Condition: unused, in the original packaging Auction-ID: A1-51368-298
pressure: 220 t chamfer lenght: 4175 mm distance between columns: 3760 mm column arm: 410 mm dayligth: 450 mm stroke: 180 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 75.0 mm/sec table width: 180 mm table height: 960 mm oil volume: 190 l 0: 295 bar controlled axis: 5 Anzahl Number of working hours: ca. 9.400 h total power requirement: 15.0 KW weight of the machine ca.: 16000 kg. range L-W-H: 4810 x 2200 x 2990 mm Very good / well-maintained condition () Only approx. 9.400 operating hours - Verified condition - Machine video - https://www.youtube.com/watch?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA OPERATEUR CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of ...
Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A1-51368-299
Brand: Kremer Type: KR-4510HW Working pressure: 110 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: tank for detergent Boiler: diesel-fired Heat Recovery: 42 kW Capacity: 600 liters per hour Connection: 230 volts Electric power: 3 kW Speed: 2800 rpm Weight: 100 kg Includes: high-pressure gun, high-pressure hose, brass coupling, 4 different spray nozzles and manual Condition: unused, in the original packaging Auction-ID: A1-51368-270
Table dimensions ( x-y/mm) 890 x 458 Slide Dimensions X-Y (mm) 890 x 458 Stroke (mm) 20 - 76 Slide Adjustment (mm) 80 Strokes type adjustable Stroke per minute 70 - 750 Weight ( ton) 7 Revised in 2021
Pressure washer Brand: DeWalt Model: DXPW001M Type: Cold Water Pressure Washer Working pressure: 130 bar Water output: 390 litres/hour (6.5 l/min) motor power: 1800 Watt (1.8 kW) Connection: 230 Volt Pump: HRM. A wobbleplate – aluminum pump head with 3 stainless steel axial pistons Hose: 10 meter high-pressure hose with integrated reel Lance: spray lance (with lance holder on the side) Frame: powder-coated steel frame Hoods: impact-resistant BASF plastic hoods Wheels: Durable rubber wheels Ø185 mm Accessory holder: Firmly built-in holder Total stop: Yes Thermal protection: Yes Self-priming: Yes Max. water temperature: 50 °C Use: Medium Duty – suitable for weekly use / 4 hours per day Weight: 15.9 kg Condition: unused, in the original packaging Auction-ID: A1-51368-189
Brand: Kremer Type: KR-4510HW Working pressure: 110 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: tank for detergent Boiler: diesel-fired Heat Recovery: 42 kW Capacity: 600 liters per hour Connection: 230 volts Electric power: 3 kW Speed: 2800 rpm Weight: 100 kg Includes: high-pressure gun, high-pressure hose, brass coupling, 4 different spray nozzles and manual Condition: unused, in the original packaging Auction-ID: A1-51368-87
Brand: Kremer Type: KR-4510HW Working pressure: 110 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: tank for detergent Boiler: diesel-fired Heat Recovery: 42 kW Capacity: 600 liters per hour Connection: 230 volts Electric power: 3 kW Speed: 2800 rpm Weight: 100 kg Includes: high-pressure gun, high-pressure hose, brass coupling, 4 different spray nozzles and manual Condition: unused, in the original packaging Auction-ID: A3-46110-1318
garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A1-51368-14
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...
Overall dimensions (LxWxH) approx: 700x500x1290 mm Auction-ID: A1-51269-659
Baler Bramidan Model HDX50 Type PEV Year of manufacture 2005 Electric drive 5.5 kW Pressing force 50 t Filling opening 1,090 x 610 mm Bale size 1,200 x 800 x 1,100 mm Stroke 1,210 mm Cycle duration avg. 22 s 4 lacing + lacing ribbon or steel wire Automatic bale ejection Dimensions: Length 1,965 mm x Width 1,365 mm x Height 2,540 mm Weight 2.5 t Sale against bid from location D - BL Thuringia Code No. Q53
For Sale: ORMA NPL-8-160 Hydraulic Hot Press – 160 Tons The machine is used, has undergone a technical inspection, is fully operational, and is ready for use. Before purchase, the machine can be started and thoroughly inspected at our company's premises. The main advantages of this machine include a maximum pressing force of 160 tons, the ability to operate using only the central hydraulic cylinders when gluing shorter workpieces, and an automatic pressure compensation system. The press is equipped with heating platens suitable for water, glycol, or oil heating, as well as a pressing time controller with automatic platen lowering at the end of the cycle. Technical Specifications: • Manufacturer: ORMA • Model: NPL-8-160 • Year of manufacture: 1991 • Platen dimensions: 3500 × 1300 mm • Maximum opening between platens: 480 mm • Flat, clean platens, free from ...
UMT AC770-19 | 19 Liter High Pressure Compressor is a professional, robust high pressure compressor with a capacity of 19 liters, designed for demanding applications in industry, workshop or garage. This compressor offers an excellent balance of power, capacity, and ease of use, making it ideal for applying pressure for paintwork, pneumatic tools, and cleaning operations. Capacity: 19 liter reservoir for continuous and stable pressure delivery. Construction: Strong, durable housing with high-quality materials for long-lasting use. Motor: Powerful motor that comes up to pressure quickly and is suitable for intensive use. Pressure level: Suitable for high-pressure applications, with a maximum working pressure that meets industry standards. Ease of use: Easy operation, with pressure control and safe pressure release valve. Mobility: Compact and portable design, ideal for use in a variety o ...
DiBO JMB-S+ 250/15 T AK (GN) – Professional hot water pressure washer on trailer DiBO mobile professional pressure washer in near-new condition, with very few signs of use. Clean and particularly well-preserved machine. Designed for heavy-duty cleaning work, it has a maximum pressure of 250 bar with a flow rate of 15 l/min and a water temperature of up to 110 °C. Diesel heater with an output of 70 kW and a diesel engine of 12.5 kW. Equipment including: GreenBoiler System Reel with high-pressure hose Cleaning gun Electronic control panel with display Emergency stop Protective cover Maximum pressure: 250 bar Flow rate: 15 l/min Maximum temperature: 110 °C Heating: diesel, 70 kW Engine: diesel, 12.5 kW Power supply: 12 V The set is mounted on a 750 kg single-axle DiBO trailer from MMA, equipped with a jockey wheel and a coupling device. Professional machine close t ...
garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A3-46110-1324
With RO BC 14/36 EU charging station and 1x 18V Li-ion battery. Auction-ID: A1-51276-873
Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46110-1317
Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40333-149
Year: 2014 Manufacturer: KÄRCHER Model: HD 1050 B Serial No.: 011954 Power: 9.5 kW Flow rate: 13 l/min Operating pressure: 230 bar Max. pressure: 250 bar Max. temperature: 60 °C Weight (kg): 74 Equipment: Honda GX390 petrol engine, high-pressure pump with chemical dosing adjustment, high-pressure couplings, movable tubular chassis with wheels. Auction-ID: A1-51439-24
pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...
pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...
pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...
pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden
pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden
pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden
pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary
pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic
pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m
pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250
Pressure:080 t throat:380 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:472 mm table surface area:840 x 610 mm table height over floor:800 mm passage to the back:520 mm ram surface:650 x 400 mm ram adjustment:70 mm power capacity:7,5 kW weight:6,9 t Dimensions (WxDxH):1,1 x 2,15 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical ram counterbalance:pneumatic clutch-/ brake combination:pneumatic
pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary
pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20
pressure:350 t distance between columns:1350 mm stroke:900 mm distance table/ram, max. stroke up, adjustment up:1300 mm table surface area:1300 x 1000 mm pressure of drawing cushion in table:100 t stroke of drawing cushion in table:380 mm die cushion area:350 x 285 mm capacity of ejector in ram:25 t ejector stroke in ram:200 mm table height over floor:750 mm ram surface:1300 x 1000 mm speed down:500 mm/s speed up:160 - 470 mm/s working speed:16 - 44 mm/s drawing speed:57 - 160 mm/s return capacity:32 t oil volume:1700 l power requirement:91,0 kW Dimensions (WxDxH):3,75 x 2,8 x 7,2 m height over floor:5,28 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary
pressure at min. stroke:3 t throat:150 mm stroke:- 39 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 380 mm pressure at min. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:790 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,2 t Dimensions (WxDxH):0,5 x 0,9 x 1,4 m
pressure at min. stroke:3 t throat:150 mm stroke:- 40 mm distance table/ram, max. stroke up, adjustment up:200 mm table surface area:280 x 250 mm pressure at max. stroke:1,5 t no. of strokes with min. stroke:- 80 /min no. of strokes with max. stroke:- 50 /min hole in the table:45 mm table height over floor:810 mm ram surface:115 x 100 mm Required air-pressure:4 bar weight:0,15 t Dimensions (WxDxH):0,7 x 0,8 x 1,4 m
maximum number of results exceeded
please refine your search
400 € 
