erfurt press used for sale

Unused, Led display, 1000W, 2800RPM, 0.3-0.9MPA Auction-ID: A1-40407-47

230V-50Hz; 1PH; Max 60C; 150BAR; 10.0L/min; including spray lance; Auction-ID: A1-51256-1701

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-51256-4055

Test pressure 16 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-91

Tank capacity is 2000 liters; Lot is sold up to 1st flange coupling; equipped with lifting eyes Auction-ID: A1-50864-79

Colin BP-508 – Blood Pressure Monitor Manufacturer: Colin Model: BP-508 Type: Vital Signs/Blood Pressure Monitor Condition: Used, Functional Tested Suitable for Recovery Room, Outpatient Surgery, Endoscopy and Emergency Department. Auction-ID: A1-51275-10

Metal construction with cylindrical hopper, filling valve, . Equipped with a set of taps, All connection fittings and lever valve control included. Functional Auction-ID: A1-51273-36

proof pressure 16.2 bar; equipped with lifting eyes Auction-ID: A1-50864-67

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W Auction-ID: A1-40407-111

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-51256-347

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-51256-526

380V-50Hz; 3PH; Max 60C; 200BAR; 14.0L/min; including spray lance; Auction-ID: A1-51256-95

Tank capacity 5000 liters; proof pressure 15.73 bar; equipped with lifting eyes Auction-ID: A1-50864-82

Additional information Brand: Daewoo Type: DHPW-7300 Condition: unused, in the original packaging Working pressure: 200 bar Temperature: 30°C to 140°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Auction-ID: A1-40407-125

pressure: 60 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Handover: in its current state as seen -Control: not working -Manufacturer: GEV GEBR. EDELHOFF, Single-column eccentric press type EPR 35 -Pressure capacity: 35 tons -Coupling: pneumatic -Drive: 3 kW -Stroke: adjustable 5 - 75 mm - Stroke rate: 120 rpm -Table size: 500 x 380 mm -Table cutout: 220 x 175 mm -Protrusion: 195 mm -Punch holder: Ø 40 mm -Insertion height 310 mm -Dimensions: Press 1520/920/H1960 mm / Control 800/400/H1100 mm -Weight: 1729 kg / 132 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 62500 € : 1181.25 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 65200 € : 1232.28 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

CONTINUOUS STEAMING AND SHRINKING OF YARNS THROUGH WATER VAPOR AT 100°

Key data: 40 t, 1500 mm

1500 x 40 ton Cybelec Cybtouch 12" X & Z Axis

Gebr. Slotted Hole Drilling Machine JAGO Type: B2 exact year not known 1-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Height adjustment by handwheel Height display via counter Table size 300 x 600 mm 2-jaw chuck (up to 20 mm) 2 pcs. eccentr. Workpiece clamp 90° stop Workpiece stop on the side Extraction connection: 80 mm Weight: 230 kg Manufacturer information Good condition! The machine from a 1-man workshop

Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible.

Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.

Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement.

Working width: 3000 mm working depth: 1200 mm Number of pressing surfaces: 3 Stk. range L-W-H: 4500 x 2200 x 2100 mm Weight: 1500 kg TRIMWEX hydraulische 3 - Etagenpresse Typ SLV - HPR3 - 100 Technische Daten - Arbeitslänge 3000 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 100 mm - Anzahl der Ebene: 3 - Verpressung erfolgt mit einseitigem hydraulischen Zylinder - Anzahl der Zylinder pro Ebene 6 - die Druckzylinder sind fest - Zylindertyp Ø 50 x 150 mm - Spezifische Druck 4,5 kg/cm2 - Anzahl der Niederhaltern pro Ebene 4 - jeder Niederhalter hat einen pneumatischen Zylinder - Typ der pneumatische Zylinder Ø 50 x 75 mm - jeder Niederhalter hat eigenes Ventil für Ein/Aus der Luft - Druckregulation mit Regulator - Hydraulisches Aggregat - Pumpendurchfluss 5,5 l - Leistung der Hydromotor 2,20 kW - max. Druck für der Hydromotor 30 - 130 bar - Parkplatz für die Niederhal ...

Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: pa ...

Pneumatic press-fit machine CIP-8P Technical data: Press force 80 kN, approx. 8 tons Force adjustment via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Tool and shank diameter Total length 37 or 76 mm, of which 15 mm in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Offer 26180 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Installation height approx. 1000 mm - Projection to the middle of the ram 520 mm - Pusher clamping surface 350 x 350 mm - Plunger clamping pin 40 mm - Table size 1000 x 1150 mm - Table opening 150 x 780 mm - Table height above floor 720 mm - Drive 400 V / 8 kW - Space requirement approx. W 1150 x H 2900 x D 2150 mm - Weight approx. 4800 kg

garage press Type: Hydraulic Workshop Press Press force: 12 tons Cylinder stroke: 175 mm Working range: 0 – 920 mm Working width: approx. 510 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 75 kg Condition: Unused Auction-ID: A1-51368-16

garage press Type: Hydraulic Workshop Press Press force: 12 tons Cylinder stroke: 175 mm Working range: 0 – 920 mm Working width: approx. 510 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 75 kg Condition: Unused Auction-ID: A1-51368-125

Equipped with foot control. Auction-ID: A1-41281-322

Auction-ID: A1-51025-2

garage press Type: Hydraulic Workshop Press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 98 kg Condition: Unused Auction-ID: A1-51368-15

Equipped with Honda GX160 petrol engine; Auction-ID: A1-50892-46

equipped with extraction Auction-ID: A1-50707-126

motor power 3.0 kW, speed 1,450 rpm, maximum pressure 4 bar, including intake filter and silencer, completely mounted on frame, suitable for air transport and aeration applications, used, operation not tested. Auction-ID: A1-41281-274

Of which 1 Brookhuis fmd in case dimensions approx. 50x24x24 cm And in coffin Auction-ID: A1-50663-1708

Consisting of five 16mm cable press boxes, each box 500 pieces (tot 2500 pieces) And three metal boxes with cable presses of various sizes Auction-ID: A7-51362-48

garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A1-51368-124

Petrol pressure washer Brand: Kremer Working pressure: 170 bar High-pressure hose: 10 meters of high-pressure hose Capacity: 540 liters per hour Engine: 4-stroke petrol engine Start: Pull starter Power: 4.8 kW Speed: 3400 rpm Nozzles: 5 nozzles Equipped with: Detergent tank Includes: Suction hose with water filter Features: Large wheels, soap tank, hose reel... Condition: Unused in the original packaging Auction-ID: A1-51368-269

High Pressure Metal Hose Reel Brand: Kremer Length: 15 meters Max. pressure: 280 bar Hose: braided hose with quick couplings Equipped with: auto-stop function Suitable for: Wall mounting Condition: Unused and in the original packaging Auction-ID: A1-51368-267

Petrol pressure washer Brand: Kremer Working pressure: 170 bar High-pressure hose: 10 meters of high-pressure hose Capacity: 540 liters per hour Engine: 4-stroke petrol engine Start: Pull starter Power: 4.8 kW Speed: 3400 rpm Nozzles: 5 nozzles Equipped with: Detergent tank Includes: Suction hose with water filter Features: Large wheels, soap tank, hose reel... Condition: Unused in the original packaging Auction-ID: A1-51368-190

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-436

Brand: Kremer Type: KR2900-4 Working pressure: 200 bar High-pressure hose: 10 meter hose with quick couplings Capacity: 840 liters per hour Motor: three-phase electric motor Plug: 400 Volt / 16A (CEE 3P+N+E) Power: 4 kW Speed: 1450 rpm Nozzles: 4 nozzles Equipped with: Stainless steel housing Condition: unused, in the original packaging Auction-ID: A1-51368-191

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-435

Combination of lots 45 to 58. This fully automatic line processes material on rolls (carrier material in combination with decorative fabric or carpet) into shaped, trimmed and laminated interior parts. Two unwinding stations are suitable for rollers up to 1500 mm wide and 400 kg and cut the materials to the desired length with a circular saw. The carrier material can first be heated in a hydraulic contact oven. Then a robot places the decoration material on top. The combined material is then fed via a Teflon tape to an oil-fired laminating contact oven. A transfer system then transfers the heated laminate to a 3500 kN hydraulic frame press (table dimensions 2000 × 1500 mm, stroke 1200 mm, suitable for tools up to 16 tons). In the press, the parts are shaped, separated and punched in one movement. The robot then removes both the finished parts and the residual material at the remov ...

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A1-51368-271

High Pressure Metal Hose Reel Brand: Kremer Length: 15 meters Max. pressure: 280 bar Hose: braided hose with quick couplings Equipped with: auto-stop function Suitable for: Wall mounting Condition: Unused and in the original packaging Auction-ID: A1-51368-188

garage press Type: Hydraulic Workshop Press Press force: 12 tons Cylinder stroke: 175 mm Working range: 0 – 920 mm Working width: approx. 510 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 75 kg Condition: Unused Auction-ID: A1-51368-227