ep used for sale

EPT15H, Model 2022 (purchased April 2023), Electric Pallet Truck, Brand: Maximum; Very little used. 1220 mm; Net weight: 123 kg External charger lI-ion battery Attention: Note the dimensions in the pictures (fork width 680mm)

Hand roller spreader with wheel drive, capacity approx. 60 ltr., spreading width approx. 70 cm. scattering way: salt about 5-6 km, Sand 1 km. Condition: Super See more winter maintenance technology from A to Z stock - photos!

Press capacity: max. 60 t Stroke of the punch: 125 mm Filling height: max. 110 mm Motor: 15 kW Approx: 1650x1801x3390 mm Net weight: 5800 kg

tool clamping area: 1 - 32 mm weight: 8 - 12 kg Driven toolholders 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

Scara robot Epson G10-851C Control: EPSON RC180 Number of axes: 4 Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min : ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces ) suitable e.g. for OKUMA box dimensions approx. 500 x 300 x 200 mm weight approx. 50 kg 3 x EPPINGER 4.200.231 drilling and milling head 3 x EPPINGER 4.200.289 drilling/milling head 1 x Drill- Milling head WTO 4 1 06 1 6006 - 40 1 x COROMANT 410 1200 72 - 40 drilling and milling head 1 x 2-jaw chuck KH 1-40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8259 Type: S5-A701S Producer: EPSON Created: 2010 Parameters: Control system: EPSON RC 180 Maximum arm reach: 786 mm Axle number: 6 Machine weight: 36 kg

This EPILOG Laser Fusion Edge 12 30watt fiber was manufactured in 2022. It features a 610x305mm work surface and a maximum Z-depth of 178mm. The machine operates with a 30-watt fiber source and achieves speeds up to 120 IPS (3.05m/s) with 5G acceleration. Weighing 63kg, its designed for precision in fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the EPILOG Laser Fusion Edge 12 machine we have for sale.Contact us for more information.

This 4-axis EPSON LS3-401S robot arm was manufactured in 2018. It features a maximum operating speed of 6000 mm/s for joints #1 and #2, and a payload capacity up to 3 kg. Ideal for tasks requiring high speed and precision, it operates efficiently with a standard cycle time of 0.42 seconds. Consider the opportunity to buy this EPSON LS3-401S robot arm. Contact us for more information about this machine.

This 4-axis EPSON LS6-602S robot arm was manufactured in 2018. It features a 600 mm arm length and can handle payloads up to 8 kg. With speeds reaching 6800 mm/s on joints #1 and #2, and 1100 mm/s on joint #3, it ensures rapid and precise movements. Weighing only 17 kg, its designed for table mounting and includes a 15-pin D-sub electrical connection. Consider the opportunity to buy this EPSON LS6-602S robot arm. Contact us for more information.

EPPENDORF Refrigerated Centrifuge Type 5417R, Maximum speed: 14000 min-1 , Elec: 230/4.0 V/A / 50 Hz / 600 W , Maximum product density: 1.2 kg/dm-3, Link to manufacturer: .eppendorf/fr-fr/Boutique-en-ligne-et-Produits/Pointes-tubes-et-plaque s/Tubes-c-WebPSub-H-44515?q=%3Arelevance&selectedResultType=Product&pa ge=1

Used Used labeller Epackaging 4.500 bph: Year: 2011 Condition: Good Used labeller Epackaging Year: 2011 Speed: 4.500 Bph Direction: Counterclockwise Type of label: adhesive Number of stations: 2 Type of application: Front label Back label Semi-wraparound Thermal transfer batch marker Ironing For Mignon bottles Code: EA 592 More details: https://bottlingscout.com

Manufacturer: Epson Model: SureColor SC-F6300 Print Specifications - Print technology: On-demand inkjet, PrecisionCore TFP printhead - Maximum print width: 1100 mm (44 inches) - Maximum print resolution: 720 x 1440 dpi - Ink type: Epson UltraChrome DS dye sublimation inks - Ink colours: CMYK (Black, Cyan, Magenta, Yellow) - Ink capacity: 1500 ml per colour - Minimum ink droplet size: 4 picolitre with variable droplet technology - Nozzle configuration: 360 nozzles x 2 rows x 4 colours Connectivity - USB: Hi-Speed USB 2.0 - Network: Ethernet 1000Base-T / 100Base-TX / 10Base-T Find more here - / Contact us at -

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

Laboratory Centrifuge from Eppendorf Operational

Eppendorf Mastercycler ep Gradient S PCR/Thermalcycler 96 well-plates or tubes heatable lid Graphically programmable Ramp rate 6C/sec, cooling 4.5 C/sec Temperature range 30C to 99C, lid 37-110C Temperature constant +/- 0.2 C

Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -

Reference Num.: 4149 Brand: EPSON Type: Stylus Pro 7900 Construction year: 2011 Available: directly Status: In production Location: Deutschland Equipment: - SpectroProofer - diverse Toner und Verbrauchsmaterialien

EPOKE sand and grit spreader

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

Line filters, power line filters, three-phase filters, three-phase line filters -Manufacturer: EPCOS -Type: FS.06.3.50 -Voltage: 440/250 V/3 x 16 A/50-60 Hz -Dimensions: 200/155/H80 mm -Weight: 3.6 kg

Manufacturer: Epilog Model: 8000 Laser System Year of Manufacture: 2017 Mass: 80 kg max Laser Classification: Class 2 Laser Product Vacuum pump: GAST DOA-P725-BN Air filter: vacu Air UML 380 (AD Oracle IQ) Find more here - / Contact us at -

Mains filter, power line filter, three-phase filter, three-phase mains filter, filter module -Manufacturer: EPA, line filter three-phase -Type: NF-K-16 -Number: 3x filters available -Price per piece -Dimensions: 250/45/H70 mm -Weight: 0.8 kg/pc.

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: EPA, Contactor -Type: NF-S-412451 -Number: 2x contactors available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece

Guide rail, servo motor, electric motor, DC motor, DC geared motor -Servo drive: with linear guide -Servomotor: EPH elektronik type DO31991373B00/4133 -Voltage: 24 V -Travel distance: 47 mm -Hole spacing: 285 mm -Dimensions: 640/110/H140 mm -Total: 4.9 kg

Seiko Epson Model LS6-B602S Scara Year of construction 10/2019 Weight 17 kg Max. handling weight 6 kg Equipped with Schunk gripper in very good condition Immediately available from stock.

Inv. Num. : 8755 Type: M120Z Producer: Epsilon Generated: Parameters: The hydraulic arm is ready after it has been completely driven off.

Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - / Contact us at -

DTG printing line 1. Epson SureColor SC-F3000 year 2021, printer software 2. Press mobi duo 3. Impregnator Schulze 4. Hot air drying cabinet DIDO PRO In good condition, fully functional Find more here - / Contact us at -

Epson Surecolor S60600 Year: 2018 Printheads 2xPrecisionCore TFP Ink System UltraChrome GS3, dual CMYK (700ml) Max Resolution 1,440 ? 1,440 dpi Top Speed Up to 95 sqm/hr Max Media Width 64inch = 1,62mtr Weight 291kg

Eppendorf Mastercycler Ep Gradient s Realplex 2 Thermal Cycler Thermal cycler model 5345 + 6300 EPgradient S Weight: 20 kg Voltage: 220V Dimensions 60×30×50 cm Without software

Centrifugal concentrator Eppendorf plus 5305 Model: concentrator plus Max speed: 1400 RPM Heating Levels: Ambient, 30°C, 45°C, 60°C Time range: 1 min to 9 h 59 min, continuous Vacuum level:

Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available

M. No.: LNDE002222 Ink Technology: Ultrachrome® Colours: Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum Droplet Size: 3,5 pl Nozzle Configuration: 360 Nozzles Black, 360 Nozzles per Color Printing Resolution: 2.880 x 2.880 DPI Paper Formats: A0, A1, A2 (42.0x59.4cm), A3+, A3 (29.7x42.0 cm), A4 (21.0x29.7 cm), B1 (72.8x102.8 cm), B2 (51.4x72.8 cm), B3, B4, 17", 24", 44" Print Margins Sheet Media: Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Compatible Paper Thickness: 0,08 mm - 1,5 mm Duplex: No Equipment / additional information: with roll holder

COMPOSITION: 01 Motorized roller conveyor/transversal/lifting roller conveyor mm 2,500 x 1,100 for feeding 01 Motorized roller conveyor consisting of mm 18,000x1,100-1,300 for unloading; Packaging dimensions on pallet mm 2,500x1,200; Speed controlled by inverter 01 Automatic wrapper Wraptor Dinamix HS with stretch film H 2.150 mm max. 01 Heating unit for automatic roll cutting 01 Siemens touch monitor and CNC control, hourly output max 40 pallets/h

tool adaptor: VDI 40 weight: . kg material: . Approx. 49 pieces The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIG/MAG hose package extension, intermediate hose package -Length: 11 m -Plug -Water cooled -Weight: 20 kg

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

spindle turning speed range: 750/1500 U/min total power requirement: 2,5 kW turning speeds: 750-1500 U/min thread cutting attachment: tool adaptor: MK4 table surface area: 320x240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max Resolution: 2880 x 1440 dpi Max Printable Width: 44? Print Speed: 16 x 20? from 2:02 PrecisionCore TFP Print Head Technology PrecisionDot Screening Technology 11 UltraChrome HDX Inks with Violet Auto-Switching Black Ink Technology User Scheduled Print Head Maintenance 2.7? Color LCD Screen, Built-In Cutter USB 2.0 and Ethernet Connectivity

Max Resolution: 2880 x 1440 dpi Max Printable Width: 44? Print Speed: 16 x 20? from 2:02 PrecisionCore TFP Print Head Technology PrecisionDot Screening Technology 11 UltraChrome HDX Inks with Violet Auto-Switching Black Ink Technology User Scheduled Print Head Maintenance 2.7? Color LCD Screen, Built-In Cutter USB 2.0 and Ethernet Connectivity

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : China : 1900 € : 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm : 45 / 90 m/min : 225 mm : 180 x 245 mm : rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm : 1.1 kW : 1500 mm : 700 mm : 1400 mm : 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Cores are ejected separately from the mash nominal power up to 1000 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2 014 mm width 770 mm Hoehe 1 615 mm He He Assumption 1 615 mm Weight 220 kg Material 1.4301 / AISI 304 Connection for mash pump DN 65 AG Hoehe mash release 430 mm Hoehe stone ejection 490 mm ; New machine - best condition

capacity 500 kg/h power 3 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 200 mm width 640 mm height 1 250 mm insertion resp. discharge height 1 250 mm weight 115 kg material 1.4301 / AISI 304 mash pump connection DN 65 AG stone discharge height 380 mm mash discharge height 340 mm suitable for stone fruit, berries scope of delivery 5 mm screen ; new machine - top condition

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 11 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 3700x1600x870 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power - used power in work: about 60-65% : 11

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor, Eprom programmer module -Manufacturer: Siemens Simatic S5 Module Eprom Programmer -Type: 6ES5985-2AA11 -Number: 1x module available -Price per piece -Dimensions: 50/45/H140 mm -Weight: 0.1 kg/pc.

EPSON EB-L25000U VPR LASER 25000 LUMENS with ELPLM12 OPTICS r.p. 1.74-2.35:1, EPSON EB-L25000U 3LCD LASER video projector res. WUXGA Video Projection ok SN: Auction-ID: A1-44225-8