engraving machine used for sale

Type: Rolling machine UL 40 Parameters: Manufacturer: Šmeral Year of production / SO / GO: - / - / 2019 Location: Czech Republic Description: Semi-automatic machine for transverse hot wedge rolling UL 35 Šmeral redesigned to UL 40. Starting bar material: diameter 14-35mm, length 2500-4000mm. Diameter of rollers 600mm, width of rollers 400mm, max. Length of material feed 150mm.

General SKU394U1144 LocationBarneveld MakeServolift TypeHF No.13261 Year of construction2014 Main Features MaterialStainless steel Motor1.5 KW Height2775 mm Specified Features - Lifting/tilting machine Lifting + tilting machinecheck Max. weight290 kg Lifting height2775 mm Hydraulic drivecheck Motor1,5 kW, 400Volt. MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Information With switchcheck Weight850 kg CEcheck Floorspace1,86x0,94 m Total height3,6 m ATEX compatiblecheck Extra SpecificationsBarrel lifter,barrel size dia. 603mm,lift height min 440 mm, max 2775 mm,barrel cap. 300 Ltr.Swing angle 180°Lifting/tilting machinesServoliftConveying systems > Lifting/tilting machinesBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...

Fully automatic 4 line stick pack packaging machine for liquids from Turpack. - In very good condition, hasnt been used a lot Dont sell in Bulgaria. Filling weight range Up to 60 cc- seller products were 5, 10 and 15 ml. Stick width- 30 mm - Fixed Stick Length (55 – 165 ) mm width of the foil roll - 280mm. Viscosity- The seller has produced a variety of products from water-like to thick as honey. From liquids like- water to gels like- mayonnaise. depending on the product, the machine reaches 100-120 sticks per minute The machine has two types of dosing, Dosing needles and electromagnetic valves The seller worked with PET12/AL08/PE45-50 – 280mm Currently dismantled in a warehouse

Matteuzzi RAS 90 Buffing Machine Computer controlled Buffing machine for retreading DIMS: 12ft long x 7ft wide x 8ft high Weight: 2500kgs

Trotec Speedy 300 Co2 Laser 120 Watt water-cooled This system has always been maintained by Trotec. • Immediately ready for use • Fully functional • Top condition • + Extended dust protection in the laser interior Advantages of Speedy Laser Engraving Machine Intuitive Software Speedy laser engraving machines are supplied with JobControl® software. This is easy to learn – a 15min tutorial is enough to start your engraving job. Equipped with a variety of options, the software is ideal for both beginners and established engravers. Speedy Laser Engraving Machine Speedy is the perfect choice for your laser engraving machine – whether you're just starting your business or looking to increase your production capacity. First-class components ensure minimal maintenance. The patented InPack TechnologyTM ensures maximum runtime. The Speedy laser engraver is 100% dev ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the indus ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Specifications / Technical Data S-400 CNC Router / CNC milling machine / Engraver With the High-Z CNC-router / engraver you purchase an allround talent (optional WIN PCNC Economy, USB or professional). If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling / engraving machines are equipped with an emergency stop button. An additional  ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...

Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...

Special price Trotec Speedy 100 Co2 Laser 30 Watt air-cooled Year of construction: 2014 Laser is immediately ready for use 4194 Hours of operation Immediately ready for use • Extraction has new filters Scope of delivery: • Trotec Laser Speedy 100 • Trotec extraction Atmos Compact year 2018 •Connecting cable • JobControl 11.4 software incl. license key •Manuals • Lens set • Lens cleaner • Lentil cloths • Allen key set On request: • Training and commissioning • Unwinding device for round engraving • Honeycomb table •Delivery Properties: Machining area: 610 x 305 mm Max. workpiece height: 132 mm Advantages of Speedy Laser Engraving Machine Fastest laser engraving machine on the market Built for productivity Time is money - the time per laser job is crucial for your business success. Original price of the system appro ...

Trotec Speedy 400 Co2 Laser 80 Watt air-cooled Year of construction: June 2015 • Immediately ready for use • 6 months warranty on all machines Working area: 1,016 x 610 mm Max. workpiece height: 305 mm • Only 2853 operating hours Scope of delivery: • Trotec Laser Speedy 400 year 2015 • Software JobControl 11.4 / Ruby incl. license key •Connecting cable • Aluminum lattice table • Lens cleaner • Lentil cloths • Allen key set • Lens set •Manuals On request: • Unwinding device • Trotec extraction • Slat table • Engraving table • Honeycomb grid table • Training and commissioning • Delivery by transport company Dimensions: width/depth/height (approx.) 1400 x 950 x 1070 mm Air support: By using an air compressor heat and gases are removed from the cutting surface blown away, resulting in a better cutting result can ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

SYNGOOD SG1218 laser was manufactured in 2015 in China. The machine has worked on the production of polygraphic die-cuts, and its versatility also allows cutting and engraving in materials made of among others sheet metal, wood, plywood and plexi. The elements are processed with a high-performance CO₂ laser with a power of 400 W, on a work table with a length of 1200 mm and a width of 800 mm. The laser is compatible with the most popular graphics programs such as CORELDRAW or PHOTOSHOP and also supports the most important graphics formats such as DXF and BMP. The machine is equipped with LASERCUT software, an optical system U.S.A. Lens II IV and a CW6000 chiller. The biggest advantage of the laser is its low number of working hours – the laser was used for only 10 hours. The total weight of the device is 1300 kg. Technical data of the SYNGOOD SG1218 laser engraving machine - l ...

CO2 laser cutting and engraving machine brand Birio model Vision Cut 10. Year of construction 2019 Perfect state of use, certified and guaranteed as new directly by the manufacturer. Working hours: 2880 Working area 1000x800 mm Cutting material thicknesses up to 20mm. workable material: wood, plexiglass, acrylic in general, fabric, paper, cardboard, anodized aluminum, cork, leather, leather and various others. The operator panel allows you to work even without a connected PC. The machine is equipped with a dry compressor, generator cooling unit, adjustable optics. The machine is equipped with CE conformity certification, use and maintenance manual. Vision Cut complies with the requirements of the national Industry 4.0 plan Included is the Birio Suite. Available for viewing and testing.

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

R25532/08W Cosmos Vega Folding Carton Gluing Machine Model: 145 Built: 2003 refurbished 2010 for corrugated board Available: immediately

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

R25591/08V KECK Folding Carton Adhesive Machine Model: SF 80 Built: 1990 Availability: instantly Unused: 800 mm Fasson glue work from the cliché Longitudinal cross-gluing, selective - Striped glue for 1 x longitudinal bonding, cliché glue for cross-gluing Still in operation: Yes Available: immediately

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

We can offer the following paper bag machine for Block bottom / SOS bags: Block bottom / SOS bag machines Producer : Windmoeller & Hoelscher Type : Triumph 3 Year app. 1968 Bag width 120 - 260 mm. Tube length 240 - 900 mm. Bottom width 70 - 150 mm. Max. web width 860 mm. Max. mechanical speed 200 m/min. W&H QMS 992 - 4 colour tail end printer 2 unwinds and glue units for 2 ply bags Still in operation: No Available: Now

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

We can offer: Windmoeller & Hoelscher Type : Triumph 2 Year: 1974 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. Max. mechanical speed 250 m/min. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels With: Bottom patch unit Still in operation: Yes Available: Now

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

Tensile testing machine for plastics, textiles, etc., type Z 653, built 1974, measuring range: 0 - 50 kp / 0 - 500 N. Pulling speed: 25 - 500 mm /min.

4 + 4 bags Sniffer Output Available: Immediately

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

folder Creaser adhesive machine Double fold head, 1 for perforation use as an option 3 Foldable Pockets + Gate Folds Adhesive system Format 50x100cm up to 480 grams Machine very suitable for covers with flaps, heavy bearing gate folding brothel etc. optional bag foldable possible MHGraphics is a Fidia dealer. We organize installation and instruction of trained mechanic Verf Gbar: immediately / Instant

CAP.: 10 000 BTLS/H OF 1.5 L,

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

in 2005 refurbished Still in operation: Yes Available: immediately

Type: MST, Y.O.M. 1989, strapping machine with 6 new replacement belt rollers, 0.9 kW.

BOTTLES & JARS!