engine lathe used for sale

Mounting bracket adapter, cross table, for mounting three-jaw chucks, three-jaw lathe chucks -Manufacturer: Scheelen, clamping bracket for lathe -Photo: Short cone 6 -Groove: 70 x 13 mm -Dimensions: see photos -Dimensions: 300/185/H180 mm -Weight: 26.3 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25/H25 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 170/30/H40 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 155/19/H16 mm -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 155/19/H16 mm -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 180/25/H20 mm -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Turning tool inclination: 107.5° -Dimensions: 150/30/H25 mm -Weight: 0.7 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 125/20/H35 mm -Weight: 1 kg

Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 235/55/H50 mm -Weight: 3.5 kg

Turning tool holder, CNC internal turning tool holder -Various sizes -Outer diameter: Ø 63 mm -Sale: as a package -Weight: 9.5 kg

Turning tool holder, CNC internal turning tool holder -Outer diameter: Ø 60 mm -Sale: as a package -Weight: 2 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25 mm Price: per piece -Quantity: 1 available -Weight: 1 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 2x available -with: 20x Widia plates each -Weight: 1 kg

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 4000mm. Spindle nose: 51mm. Motor power: 12,5cv. Equipped with universal chuck of 250mm and steady rest. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

Mazak Quick Turn Smart 250M L Turning-Milling Center CNC Model Hersteller [manufacturer]: Mazak Germany Type [ type]: Quick Turn Smart 250M L Control unit: Mazatrol smart Incl. handwheel Baujahr[construction year]: 10/2016 Weight [weight]: 6500kg Approx. (L x D x H): 3.4m x 2.0m x 2.0m Full documentation is available. Various accessories after consultation. Top Zustand / condition From first hand, from Germany. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you.

Cazeneuve HB500 rebuilt lathe. Distance between centers: 2000mm. Swing over bed: 500mm. Swing over carriage: 220mm. Motor power: 10cv. Spindle nose: 40,5mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with universal chuck of 250mm and steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 750mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

Key data: 630 mm, 2000 mm, 400 mm

Sell a well-preserved lathe from WMW model DLZ 630 x 2000. The machine is in good condition. The dimensions of the machine are LxWxH 4200mm x 1600mm x 1400mm. Spindle passage is 62mm. The machine was completely cleaned. Incl. guideline and sitting skirt. If you have any further questions, please contact us. The machine can be inspected and tested under power by prior appointment. On-site loading is no problem and free of charge. Furthermore, the machine can be delivered in the immediate vicinity and against assumption of costs, with its own truck. A suitable unloading facility must be available for this purpose. The sale is without guarantee and warranty. All information without guarantee.

Stop for lathe support, longitudinal stop, lathe, support stop -Recording dimensions: see photos -Clamping height: 22 mm -Support length: 100 mm -Quantity: 1x holder available -Dimensions: 150/50/H95 mm -Weight: 2.6 kg

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm turning dia. in gap: 690 mm spindle bore: 58 mm spindle turning speed range: 25-2000 U/min feeds - longitudinal: 0,031-1,7 mm/U voltage: 400 V / 50 Hz total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L & Z lathe WEILER CONDOR B incl. three-axis digital display -CE - Identifier -Machine from educational institution / very well maintained -Tip height 165mm -Circumferential diameter over bed 330mm -Circumferential diameter over face slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm - Automatic / longitudinal & face feeds -Thread/Metric/Inch etc. -Rod passage 40mm -Tailstock / quill holder MK 3 -Multifix base holder & inserts -Three-jaw end-ender 200mm -Electric lining protection -Spindle protection cover - 2x Emergency / Off -Coolant device -Swarf back wall -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 1200Kg

turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well maintained original condition from educational institution -CE - Identifier -Year of construction 2008 -Three axis digital display -Turning diameter 420mm -Circumferential diameter over bed slide 250mm -Turning diameter in the offset 580mm -Turning length 1000mm -Speed range (transmission) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock cone MK 4 / quill travel 130mm -Röhm three-jaw chuck 250mm & interchangeable jaws -Fixed bezel -Multifix base holder & 3x inserts -Coolant device -Foldable protective device for steel holders -Electric lining protection -Foot brake -Swivel machine light -Running tip (Röhm) -Machine feet -Bed stop -Swarf back wall -Emergency / Off -Operating tool Dimensions: LxWxH 2.1x0.8x1.7 meters / Weight 1600Kg

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.

A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2006 ROMI 33×80 Oilfield Hollow-Spindle CNC Lathe Manufacturer: ROMI Model: 33×80 Year: 2006 CNC Control: FANUC 21iT Application: Oilfield / Heavy-Duty Machining Main Specifications Swing over bed: 33” Swing over cross slide: 23” Chuck size: 24” Spindle bore / bar capacity: 10.5” Maximum turning diameter: 23” Maximum turning length: 90” Maximum spindle speed: 750 rpm Main motor: 60 HP Tailstock: Yes CNC control: FANUC 21iT Electrical: 480 V / 75 A FLA Approx. machine weight: 30,000 lbs Included Equipment 2 × chip pans — approx. 5’ × 11’ × 4’ — 1,000 lbs each Chip conveyor — approx. 4’ × 12’ × 6’ — 2,000 lbs Chiller — approx. 2’ × 2’ × 5’ — 1,200 lbs Hydraulic pump — approx. 2’ × 3’ × 5’ — 1,500 lbs Shipping Dimensions Main machine: 17’ × 8’ × 7’ — approx. 30,00 ...

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 mm, 900 mm, 310 mm

Paulimot PM4000 lathe with measuring system and base cabinet For sale is a Paulimot PM4000 precision lathe including a digital measuring system (3-axis digital display) and matching base cabinet. The machine is ideal for use in workshops, model making, prototype production, training or for demanding hobby users. The integrated measuring system allows work to be carried out precisely and comfortably. Equipment: Paulimot PM4000 Lathe Digital measuring system / digital display Sturdy base cabinet Lead and pull spindle Forward and backward running Various feed and thread settings Ready to use Technical data: Center width: 900 mm Circumferential diameter over bed: 310 mm Spindle bore: 38 mm Clamping range inner jaws: 4-200 mm Clamping range outer jaws: 65-200 mm Motor power: 1.5 kW Power supply: 400 V Condition: The machine is in used and functional condition  ...

Speed: 12.5-2000/min, with documentation. An on-site inspection is possible.