engine grinding used for sale

Sell Flame Flashback Arrester for Jenbacher BR 6

Iveco AIFO Marine Diesel Engine with ZF Marine Transmission Used marine diesel engine assembly equipped with a ZF marine transmission. The engine includes twin MANN W 1170/7 oil filters, a Bosch 24 V electronic control module, turbocharger, intake and exhaust system, hoses and associated pipework. Manufacturer: Iveco AIFO Engine type: Marine diesel engine Oil filters: 2 x MANN W 1170/7 Control system: Bosch 24 V electronic control module Transmission manufacturer: ZF Transmission part list number: 3215004655 Transmission ratio: 2.07 Transmission oil: SAE 30, approximately 7.0 l Clutch oil pressure: 20 Approximate dimensions: 1,800 x 1,100 x 1,300 mm Approximate weight: 1,200 kg The engine and transmission are offered in used condition with visible surface corrosion, weathering, paint deterioration and wear on hoses and pipework. The engine, gearbox, control ...

MWM Inline Six-Cylinder Turbocharged Diesel Engine Large MWM marine/industrial diesel engine with mechanically governed fuel injection, liquid cooling and charge-air intercooling. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Induction: Turbocharged with charge-air cooler Fuel system: Mechanical injection with six high-pressure injection lines Equipment: Injection pump, turbocharger, charge-air cooler, starter, alternator, filters, cooling system, pipework and flywheel/coupling assembly Charge-air cooler: Ladeluftkühler by Motorenfabrik Langenstein & Reichert GmbH & Co. KG Condition: Used, stored outdoors Approximate dimensions: 2,200 × 1,100 × 1,450 mm Approximate weight: 2,500 kg The engine appears substantially complete but shows surface corrosion, oxidized fittings, deteriorated paint and weathering from prolonged storage. So ...

MWM Six-Cylinder Diesel Generator Set Open-frame stationary diesel generator set comprising an MWM inline six-cylinder diesel engine directly coupled to an AC alternator. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Fuel system: Individual mechanical fuel-injection elements and lines Cooling: Liquid-cooled Equipment: Dry-type air cleaner, dual fuel filters, starter, charging equipment, cooling system and separate control panel Monitoring: Carlo Gavazzi Mini TOL 122B alarm and monitoring unit Hour counter: Approximately 3,168 hours, photo-indicated Condition: Used, stored outdoors Approximate dimensions: 2,600 × 1,050 × 1,500 mm Approximate weight: 2,200 kg The generator set appears substantially complete but shows widespread corrosion, oxidation, dirt, biological debris, aged hoses and weathered wiring. Portions are wrapped for storage ...

turning diameter over bed: 280 mm turning dia. over face-slide: 150 mm centre height: 140 mm turning length: 500 mm main drive stepless adjustable: 0 - 6.000 U/min spindle speed: 30 - 5.000 U/min max. workpiece weight between centers: 100 kg quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1430 x 950 x 1550 mm Bed Slide (Z-Axis): - Guide length of the bed slide: 350 mm - Bed width: 205 mm - Slide travel: 500 mm - Max. feed force: 3500 N Flat slide (X-axis): - Slide travel: 150 mm - Slide width: 140 mm - Max. feed force: 2500 N Upper slide (Z-axis): - Slide travel: 100 mm - Slide width: 92 mm - Swivel range of the cross slide: 75 ° The data for this ad was created with ModulMWS - the soft ...

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hydraulic system for hammer, with 200mm bucket and 800mm bucket never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-1

HT25 model crawler mini excavator, equipped with 360 degree rotation fifth wheel, swing arm, control joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50801-7

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hydraulic system for hammer, complete with demolition hammer and 400mm digging bucket never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-10

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hammer hydraulics, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-15

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hammer hydraulics, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-25

HT25 model mini crawler excavator, equipped with 360 degree rotation fifth wheel, swing arm, joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50801-20

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hydraulic system for hammer, equipped with auger and 400mm digging bucket, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-5

HT25 model crawler mini excavator, equipped with 360 degree rotation fifth wheel, swing arm, joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines, with 250mm bucket and 1000mm bucket never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50801-12

Mini crawler excavator model HT25, equipped with 360 degree rotation fifth wheel, swing arm, control joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines with 250mm bucket and 1000mm bucket, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50801-3

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 1/min, 1500

Jenbacher JMS 612 | Engine and generator with control cabinets | 2,000 kW el. | Year of manufacture 2016 For sale: Jenbacher JMS 612 gas engine with generator (genset), 2,000 kW electrical power, built in 2016. Condition All maintenance was carried out by 2G according to the Jenbacher maintenance plan. The engine is still in its original condition. Scope of Delivery Engine and generator (genset) Control XT4 Control cabinets A1 and M1 with Diane XT4 Control cabinet with higher-level control Documentation, circuit diagrams Viewing on request. The price is on a negotiation basis.

Conventional turning machine GRAZIANO SAG 14 - 180 x1000 mm, The Graziano SAG 14 is an Italian-made centre lathe, renowned for its high rigidity, precision, and long-term reliability; it features a natural gap, allowing for the machining of large-diameter workpieces near the headstock., Height centres: 180 mm, Distance between centres: 1000 mm, Bed width: 280 mm, Swing over crosslide: 220 mm, Spindle nose cam-lock din55029: 5 , Spindle speed: 40-1500 giri/1, Number of spindle speeds: 12, Spindle bore: 51 mm, Taper of quill mt: 4, Tailstock quill diameter: 4 Kw, Spindle motor power: 50 mm, Approx net weight: 1.400 Kg, Accessories: Self centering chuck, quick change tools turret

turning diameter: Ø 2000 mm turning length: 3500 mm turning dia. over face-slide: 1500 mm total power requirement: 28 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 10 x 3 x 3 m No. 4944 RAVENSBURG K 66 - 3500 (4350) Working range: Sph.1050x Spw.3500 (4350) Drive: 28 kW Faceplate Ø 1500 mm Tailstock Bed extension 700 mm Roller support Ø 150 - 1400 mm steady rest Lathe Ø 2000 / 1500 Spindle bore 90 mm Speed range 0.6 - 250 min-1 Space requirement approx. 10 x 3 x 3 m Weight approx. 22 tons 20 % discount for ex-works delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning length: max. approx. 1000 mm, centre height: approx. 250 mm, with coolant device, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm

engine lathe, year 2008. Used machine. More info & price on IndustrialBuyer.

Degree of protection: IP 54 (dust and splash proof) Rated voltage: 400 / 230 V (50 Hz) Battery type: 2x 12 V / 42 Ah (10EP) Battery voltage / capacity: 24 V / 42 Ah Included: 6 cylinder Doosan diesel engine Engine.Number: Edipa 218182 Year of Make: 2012 294 kW 1 x 400 litre diesel tank 1 x KSB sprinkler pump, type: MX 150-200 Auction-ID: A1-51285-330

Recently received maintenance and knives have been sharpened. Ready to use without papers. Auction-ID: A3-46111-17006

3.6-litre 4-cylinder turbodiesel with intercooling Auction-ID: A1-51321-6

Of which 2x generator and 1x pump unit Auction-ID: A1-50889-99

Conveyor belt system mobile, SID - TBS - 300KN-1, year of construction 2019, load capacity 300 KN, connected load 32A, mains voltage 400V / 50 Hz Auction-ID: A1-51285-340

Consisting of, among other things, hand augers, bump bars, brooms, shovels, compactor, TopCon fiber tripod, etcetera Auction-ID: A1-50889-131

Formwork vibrating motor, for. formwork or moulds, in crate pallet Auction-ID: A1-50663-1536

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C, with motor EMF 0.37 kW Auction-ID: A1-51321-64

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C, with motor EMF 0.37 kW Auction-ID: A1-51321-61

3.6-liter 4-cylinder turbodiesel with intercooling. Included: Accessories Auction-ID: A1-51321-5

3.6-liter 4-cylinder turbodiesel with intercooling. Included: Accessories Auction-ID: A1-51321-7

Degree of protection: IP 54 (dust and splash proof) Rated voltage: 400 / 230 V (50 Hz) Battery type: 2x 12 V / 42 Ah (10EP) Battery voltage / capacity: 24 V / 42 Ah Included: 6 cylinder Doosan diesel engine Engine.Number: Edipa 218385 Year of Make: 2012 294 kW 1 x 400 litre diesel tank 1 x KSB sprinkler pump, type: MX 150-200 Auction-ID: A1-51285-331

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C, with motor EMF 0.37 kW Auction-ID: A1-51321-65

Yamaha Rivage PM5 – Digital Mixing System: CS-R5 Control Surface + DSP-RX Motor with HY144-D Dante Board Manufacturer: Yamaha Model: Rivage PM5 (CS-R5 Surface + DSP-RX Engine) Purchase: Purchased new on 24/06/2021, first hand Use: 2 to 3 times per year Firmware: V6.71 (console and DSP) DSP-RX engine 120 input channels 48 mix buses + 24 dies HY144-D Dante board installed Mounted in a 19\" wheeled rack flight case with power distribution (Samson PowerBrite PB11 conditioner + power strip), lock drawer and wiring CS-R5 control surface 3 touch screens 8 mic/line inputs and 8 local outputs Supplied in its own wheeled flight caseComposition of the lot: CS-R5 surface, DSP-RX motor with HY144-D board, 2 wheeled flight cases, electrical distribution and wiring. Sold as shown in the photos. Disassembly and loading are to be arranged by the buyer, who provides suitable transport and  ...

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compost turner Willibald TBU AM Compost pile turner/ compost turner for restacking trapezoidal compost heaps up to 3 m high Perkins own diesel engine 128 kW Working speed approx. 0.5 - 1 km/h Working height up to 3 m  Working capacity approx. 650 - 1,000 m³/h Mounts for Volvo L70-90 (120) Weight approx. 2,700 kg Good, ready for use Net price from location 21,500,-- € + VAT Sale from Saxony location Q32

Incl. mounting frame, rollable Overall dimensions (LxWxH) approx: 620x700x1700 mm Auction-ID: A1-51269-383

For testing and tuning engines Working CO Analysis Cabinet fully functional Auction-ID: A3-46110-9425

Kubota engine 2 cylinder diesel engine Type z482 Engine does not run due to too little compression Total operating hours 60 Incl starter motor and then alternator and v belt Auction-ID: A1-40333-51

Only 1.6 operating hours Auction-ID: A3-46111-18646

Equipped with: Deutz AG, F4L 2011, code: CE47,8, serial number: 10421006, power: 47,8 kW (≈ 64 HP), speed: 2800 rpm, displacement: 3,109 litres, injection rate (Fuel Rate): 42,5 mm³/stroke, valve position: Inlet 0,30 mm, Exhaust 0,50 mm, country of production: Germany, Dimensions: 75 × 60 × 80 cm (L × W × H) Auction-ID: A1-47396-2281

Equipped with: Deutz, type: F3L 1011F, engine power: 32.0 kW (approx. 43 HP) @ 2100 rpm, engine number: 00349723 Auction-ID: A1-47396-2282

1999 Hyster H4.00XL6 LPG Lift Truck – 3,200kg – Duplex 4,750mm – Fork Positioner/Side Shift – Engine Loose Heavy duty Hyster H4.00XL6 LPG forklift, built in 1999, equipped with high duplex mast and Little Giant hydraulic double fork positioner with integrated sideshift. The motor has been disassembled and is supplied separately. Specifications: Brand: Hyster Type: H4.00XL6 Year of construction: 1999 Serial Number: G005A11904W Fuel: LPG / gas Hours: approx. 5,800 hours, read, not guaranteed Engine according to model specification: GM V6 4.3 litre LPG Engine power according to model specification: approx. 65.2 kW / 89 hp Nominal capacity base model: 4,000 kg at 500 mm load center Lifting capacity in current version: approx. 3,200 kg at 600 mm load centre Mast: duplex Maximum lifting height: approx. 4,750 mm Minimum drive-through/mast height: approx. 3,260 mm Fo ...

Thickness measuring system under different pressures THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-206

Mantis Elite VISION Engineering Stereoscopic Microscope LOD'AIR Auction-ID: A1-51527-154

Auction-ID: A1-51527-126

Prvomajska Raša D480 Conventional Engine Lathe Manufacturer: Prvomajska Raša Model: D480 Equipment type: Conventional Engine Lathe Year: 1983 Serial number: P1925.0765-06 Reference number: 319086 Heavy-duty conventional metalworking lathe designed for turning, facing, boring, threading and related machining operations on cylindrical workpieces. Technical specifications: Working length: 2,000 mm Electrical supply: 380 V, 3-phase, 50 Hz Rated current: 26 A Fuse rating: 35 A Equipment / features: Tailstock Longitudinal carriage Cross slide Tool post Manual operating controls Important: Machine is supplied without chuck. Approx. dimensions (L × W × H): 3,800 × 1,200 × 1,500 mm Approx. weight: 3,000 kg Condition: Used. Main machine structure, carriage, cross slide, tool post and tailstock are present. Spindle, gearbox, feeds, bearings, electric ...

VISION Engineering EVO Cam EVO CAM II High Definition Digital Microscope THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-43

L & Z lathe / WEILER CONDOR AC / Stepless speed regulation / FROM A TRAINING FACILITY - CE - Marking -Year of manufacture 2000 -Turning diameter over face slide 180mm -Tip height 165mm -Max. turning diameter 330mm -Turning length approx. 800mm -Speed (infinitely variable) max. 2800 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch etc. -Three-jaw chuck -Tailstock -Swarf back wall -Machine light -Multifix base holder & 6x inserts -Various interchangeable wheels -Coolant device -Miscellaneous operating tools -Documentation Dimensions: LxWxH 1.8x1x1.8 meters / Weight 1300Kg