engine grinding used for sale

1500L Mixing Vessel with Mixer Vertical stainless steel tank 1500L Gross Volume Manufacture: Unitstaal A/S Denmark Year of Manufacture: 2000 Diameter Approx 1350mm Height Approx 2300mm (Including Motor) Bottom Outlet DIN Butterfly Valve Top Manway Double Walled with Insulation Pressure Gauge on Top Sight Level Sight Tube Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

11800L Square Vessel - Atmospheric Vertical stainless steel tank 11800L Gross Volume Manufacture: STB Engineering / 2014 Height Approx 2700mm Width Approx 2550mm Depth Approx 2550mm Insulated Stainless Steel Clad sides Cooling Jackets 1.5" RJT Pipework & Fittings Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

enlargement: 10-100x diameter: 200 x 150 mm weight of the machine ca.: 0.15 t dimensions of the machine ca.: 0.4 x 0.5 x 0.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU223S097 MakeK.F. Alliance Eng. Limited (UK) TypeSH No.8868 Year of construction2002 Mounted on framecheck Main Features MaterialStainless steel Length2300 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width400mm Feeder length2300mm Feeder height130mm Closedcheck Inletdia. 240mm (3x) dia. 200mm (1x) Outletdia. 240mm With motor1.5 kW 230/400 Volt MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld Floorspace3,1x0,8 M Total height1,8 M Weight1200 Kg CEcheckVibro feedersKF Alliance Engineering Ltd.Conveying systems > Vibro feedersBrand > KF Alliance Engineering Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

Our state-of-the-art Automatic Tube Filling Machine is a versatile all-rounder and has been developed to optimally support companies with the highest quality standards. Thanks to its high-quality workmanship and wide range of applications, it offers intuitive operation that optimizes your tube filling processes efficiently and reliably. The powerful drives and the user-friendly color touchscreen control system allow maximum flexibility for format and product changeovers and greatly simplify your tube filling. The machine has memory locations for quick and reproducible setting of all relevant machine parameters. If you would like to optimize your tube filling processes through a strong production output with high quality at the same time, we at Impuls Packaging are your ideal partner. Overview of the overall system Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 ...

Stainless steel tank 80 litres, NEP cleaning ball, 5 taps, - 1 tapping of 22 mm, - 1 tapping of ca 38 mm, - 1 tapping of ca 44 mm, - 1 tapping of 72 mm, - 1 tapping of 72 mm, Volume: 80 litres , Cover diameter: 400 mm, Tank bottom outlet: Yes, Tank bottom diameter: 35 mm, Event: 1, Mobile tank: Yes, Weight (kg): 85 , Calculation temperature (°C): 143, Calculated pressure : -1 / 3.3 bar , Test pressure: 5,3 bar , Operating pressure: -1 / 3 bar , Lid: 1, Design pressure : -1 / 3.3 bar , Pressures test: 5.3 bar , Porthole: 1, Maximum allowable pressure: 3.3 bar

Double-walled stainless steel tank, Manufacturer GOAVEC, Capacity 105 litres, CIP ball, Volume: 105 litres , Hustle: Bottom of tank, Elec: 400V, Engine: DR drives type TS71A4, Engine power: 0,25 kW, Cover diameter: 500 mm, Tank bottom outlet: Yes, Tank bottom diameter: 22, Event: 1, Mobile tank: No , Double envelope: Yes, Double envelope volume: 8 litres , Calculation pressure (double envelope) : 2.2 bar , Maximum admissible temperature (double envelope): 95 °C , Test pressure (double envelope): 3.5 bar , Operating pressure (double envelope) : 2 bar , Double envelope fluid: Water , Operating pressure: -1/3 bar, Pressure calculation: -1 / 3.3 bar, Operating temperature: 0 / 143 °C , Calculation temperature: 143 °C , Test pressure: 5,3 bar, Top tapping: 1, Side tapping: 1, Lid: 1, Design pressure (double jacket) : 2.2 bar , Proof pressure (double jacket): 3.5 bar , Operating pressure (d ...

3-Stage In-Line High Shear Mixer 18,5 kw, max 3000 rpm, inlet DN80 / outlet DN65, three stage multishare in-line mixer, with Eagle Burgmann Thermosiphon TS2000

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

The Engineering Services Northland Ltd. Casein Mincer is an industrial-grade processing machine designed for use in the dairy and broader food industries. It is primarily used to reduce curd or other soft solids to a uniform particle size, facilitating downstream operations such as washing, drying, whey separation, and preparation for cheese or casein production. The machine is constructed entirely from food-grade stainless steel and features robust bearing housings and mechanical seals suitable for continuous industrial operation. Particle size can be accurately controlled through interchangeable and adjustable mincing plates. The unit is fully compatible with CIP (clean-in-place) systems, ensuring efficient and hygienic cleaning. The mincer was previously operated in a casein production facility and offers an estimated processing capacity of approximately 8.000 kg/h of wet casein curd. ...

Gough Engineering GV1 Vibratory sieve Stainless, 450mm mesh diameter, mobile, 3Ph

Input : 30AC 380-480V+10%/-10% 47-63Hz 8.0A Motor : 1.5kW 2HP Brand : Siemens For any inquiries, please contact: 1. email: warisaratopglove.co.th and supaluktopglove.co.th 2. Contact Number: i. Ms.Warisara S. F7andF8A: +661 2911580

AVIAN Engineering Grinder G46/ 60, refurbished 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)

Used 6-stage evaporation station made by B&P Engineering. New 2006. In addition, concentrate cooling station by Ciat. New 2005. Capacity 24.000 liters/hour.

Heavy duty distribution pannels in very good shape,turbine control pannnels etc.

A continuous cabinet press Pritelli is available. Press length: approx. 2500mm, press height: approx. 1300mm, press depth: approx. 680mm, pressure shoes vertical horizontal: 2/3, rated power: 7kW. Machine dimensions X/Y/Z: approx. 7000mm/2400mm/2950mm, weight: approx. 2800kg. An on-site inspection is possible.

I am pleased to offer the following Grinder:-, Used Avian Engineering Model G46/ 86 Grinder, Main Motor 30 kW, Blower Motor 4 kW, Rotor Blades 6pcs, Stator Blades 4pcs, Rated Through-put +500 KG/ H, Cutting Chamber 460 x 850 mm, Hopper Opening 850 x 500 mm, Film infeed width: 800 mm, CUTTING CHAMBER, The cutting chambers are made entirely of high quality steel. CNC machined and ground before assembly. Long life is ensured by the use of heavy wall sections and high grade material that will not contaminate the material being ground. The design allows for easy disassembly, repair and maintenance., ROTOR, The rotors are manufactured from high tensile steel and are balanced for stable running. The rotors are manufactured with scissor cut action. The Rotor design allows for easy removal and set-up of the blades and gives a consistent particle size. Transmission system: Belt and pulley driven,  ...

Spares in stock for frame 5 turbines

Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible.

Caterpillar C15 - Unused - 475 HP - MCW

Caterpillar C13 - Unused - 440 HP - RRA

A Poltech blast chamber system with manual blasting media application is available. Blast chamber dimensions X/Y/Z: approx. 6000mm/4000mm/3000mm, external dimensions X/Y/Z: approx. 14000mm/6500mm/5000mm. Documentation available. An on-site inspection is possible.

diameter range max 18 mm feeding speed max 15 m/m capstan diameter 900 mm output 20 HP

General SKU416X1286 MakeQVF Engineering GmbH LocationBarneveld TypeDN 400/ 50 L Pressure Working pressure1.5 Bar Main Features MaterialStainless steel/Glass Volume50 Ltr. Motor0.65 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity50 l. Vessel sizesø 410 x 810 mm Dished bottomcheck Dished top sidecheck Top connectionsDN 40, 3x DN 50, DN80 OutletDN 40 With propellor stirrercheck Motor0,65 kW 230/400 V (Ex) Speed mixing shaft10—340 rpm MaterialGlass, Stainless steel 1.4301 (304) With jacketcheck General No.GT 66520 Year of construction2005 Floorspace0,6 x 0,6 m Total height2,5 m Weight350 kgStirring vesselsNew arrivalsQVF Engineering GmbHStirring vessels > Stirring vesselsNew arrivalsBrand > QVF Engineering GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...

General SKU416X1284 MakeQVF Engineering GmbH LocationBarneveld TypeDN600/ 300 L Pressure Working pressure1.5 Bar Main Features MaterialStainless steel/Glass Volume360 Ltr. Motor1.35 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity300 l. (± 360 l.) Vessel sizesø 620 x 1430 mm Dished bottomcheck Dished top sidecheck Top connectionsDN 10, 2x DN 40, 2x DN 50 OutletDN 40 Max. temperature20 °C With paddle stirrercheck Motor1,35 kW 230/400 V Speed mixing shaft0—240 rpm MaterialGlass, Stainless steel 1.4571 (316Ti) With jacketcheck General No.GT 66509 Year of construction2005 Floorspace1 x 1 m Total height3 m Weight500 kgStirring vesselsNew arrivalsQVF Engineering GmbHStirring vessels > Stirring vesselsNew arrivalsBrand > QVF Engineering GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price co ...

For sale: B100-S2 Dry Self-Priming High-Pressure Diesel Engine Pump, The powerful, compact and versatile solution for all your pumping work., , ✓ Ready for immediate use | ✓ Robust & reliable | ✓ High capacity & delivery head, , Are you looking for a powerful, self-priming diesel engine pump that effortlessly moves large quantities of water and is also suitable for a wide range of applications? The B100-S2 is exactly what you need., , Technical specifications, Type: B100-S2, , Pump type: Dry self-priming high-pressure diesel pump, , Capacity: Up to 120 m³/hour (see pump curve), , Delivery head: Max. 70 meters (see pump curve), , Engine: Hatz diesel engine, 39 kW at 2900 rpm, , Fuel tank: 300 liters (max. 30 hours at full load), , Fuel consumption: Approx. 10 litres/hour, , Connections: 4” flange (pressure & suction), , Dirt passage: 29 mm, , Dimensions (LxWxH): 2520 x 1200 x 181 ...

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

Impulse Pumps proudly presents the SIP 200-8HP, an exceptional addition to our esteemed SIP-series range. This pumpset is meticulously engineered to provide unparalleled pumping capabilities, especially when it comes to handling higher discharge heads. With the SIP 200-8HP, you can experience enhanced performance and conquer even the most challenging pumping tasks with ease., , Equipped with a robust JCB 448 diesel engine, the SIP 200-8HP delivers outstanding power and reliability. This engine, combined with Impulse’s cutting-edge technology, ensures optimal performance even under demanding conditions. You can trust our pumpset to meet the highest emission regulations while prioritizing safety, empowering you to operate efficiently and confidently., , Navigating complex equipment is a thing of the past. The user-friendly Ecomizer-Pro pump controller by Impulse provides real-time insigh ...

This Gorman-Rupp S-Line VPA3-70-L is a diesel-powered, dry self-priming centrifugal pump (vacuum pump assisted), with a maximum capacity of 70 m³/h and a delivery head up to 20 mWc. This 3-inch pump is suitable for clean and wastewater, with a maximum solids passage of approximately 29 mm., , Key Specifications, Chassis Dimensions: Fully enclosed, sound-dampened., Fuel Tank: 100 liters, suitable for HVO fuel up to 100%., Engine: Kohler diesel engine, , The pump performs optimally when pumping clean or contaminated water, with a robust steel frame for continuous use., , Throughput capacity: 70 m3/h, Max dirt passage: 29 mm, Motor brand: Kohler, Max. head: 20 MWK, Max dirt passage: 3000 rpm, Weight: 600 kg, , = More information =, , Year of manufacture: 2021, Applicable material: Water, Empty weight: 600 kg, Connector size: 4 Inch, Technical condition: good, Visual appearance: good, Price ...

This diesel-powered GEHO ZD 300 double-acting piston pump in a soundproofed casing has the great advantage, compared to its big brothers, of its light weight and compactness. The great efficiency of the ZD 300 ensures an enormous capacity., Feel free to call or email us for the possibilities., , Throughput capacity: 35 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 895 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 895 kg, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you ...

This Eisele Waterpump BSD442, Can be used for the emptying and cleaning of pits, ponds, mine shafts and similar tasks,, for reducing ground water, pumping out water ballast from ships, on building sites, in, stone and gravel quarries and building material works., For municipalities and industrial concerns., , Throughput capacity: 100 m3/h, Max dirt passage: 19 mm, Max. head: 6 MWK, Max dirt passage: 1750 rpm, Weight: 1600 kg, , = More information =, , Year of manufacture: 1999, Applicable material: Water, Empty weight: 1.400 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.n ...

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

CNC cylindrical grinding machine, STUDER S31 CNC LeanPro, with Pictogramming, Distance between centers: 1000mm, Center heigh 175mm, Grinding Wheel head rotation (B) 360° (1°), 2 ext Grinding Wheels, 1 int Grinding Wheel, Ext Grinding wheel, 400 mm x 40 mm x 127 mm, overhauled spindle > see photos, Workhead, CM 4, 0-1000 RPM, CNC Fanuc, Programming: Pictogramming, Heidenhain linear encoders, This machine can be inspected under power in our warehouse in Gussago BS Italy

Vertical Grinding Machine, Surface Grinding Machine DORMAC / DORIA Type PerseoCup Grinding MachineFabr. No. 786 Year of construction 1987Grinding area 500 x 250 mmMagnet 400 x 150 mmGrinding height Grinding wheel - magnet approx. 190 mmGrinding height Grinding wheel - clamping surface Table approx. 235 mmGrinding wheel diameter 175 mmTable longitudinal movement approx. 600 mmGrinding wheel speed approx. 2800 rpm. Motor power approx. 2.2 kWNerg connection 380 volts, 50 Hz manual depth delivery via handwheel, travel per

grinding diameter: 360 mm grinding length: 1600 mm centre height: 180 mm internal diameter: 0 mm grinding depth: 0 mm swing diameter: 0 mm total power requirement: 40 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m K A R S T E N S (Germany) Universal CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3  ...