140,790 used machines on RESALE, but how to find them? Machine Search
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Perkins ISM Shibaura E 673 L, 3-cylinder water-cooled diesel engine, displacement 761 cm³, power 11.5 kw/15.4 hp / 3,600 rpm., unused, from stock, incl. starter, and alternator. Other 3-cylinder Perkis diesel engines available, also Isuzu, ISM, Iseki, Komatsu, Kubota, Lombardini, Yanmar.
Newly arrived new turbocharger Caterpillar 3512 B Cat part number 509-1017 Perfect machinery international bv info @perfectmachinery.nl +31 78 6158040 Whatsapp the Netherlands+31 653549259 Spain. +34 682511830
Key data: 650 mm, 1300 mm, 1 U/min
Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump
greates pass round over bed: 480 mm swing diameter over bed slide: 300 mm turning length: 1500 mm centre height: 240 mm centre distance: 1500 mm spindle bore: 42 mm spindle turning speed range: 14 - 1400 U/min total power requirement: kW weight of the machine ca.: 2,4 t dimensions of machine L x W x H: 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LISTING ID 22696 BRAND: CATERPILLAR MODEL: 3508 B POWER: 746 kW 1600 RPM COMPLETE WITH PANELS AND ACCESSORIES
LISTING ID: 22630 BRAND:IVECO MODEL: 8210 M22 POWER: 162 kW (220 hp) CD RPM: 2200 DISCPLACEMENT: 13.8 L BORE x STROKE (mm) 137 x 156 COMPRESSION RATIO: 16:1 HS CODE 84081019 NET WEIGHT 1130 kg (Dry)
2 X ENGINES FOR SALE Brand: MITSUBISHI Model: S12A2 C2 MPTK (FW) Power: 634 kW (850 hp) 1940 rpm Specification: Flywheel housing: SAE-0, Flyvheel: 18 Inch, Starter: 2x 24V, Governor Cooling system: Keel cooled Remarks: R41E3022300 HS CODE 84081019 Dimensions (cm): 230 x 165 x 160 Dry weight (kg) : 3800
Brand: YANMAR Model: 6AYM-WET Power: 555 kW 1840 rpm Condition: Brand New Country of Origin: Japan Serial Number: 9501 HS CODE 84081079 Weight (kg) :2365 (without marine gear) Dimensions (cm) 200×130×143
LISTING ID 22518 Brand: YANMAR Model: 6HYM-WET Condition: Brand New Specification - Model : 6HYM-WET - Number of cylinders: 6 in-line - Bore × stroke (mm) : 132.9 × 165 - Displacement (lit): 13.733 - Rated output (kW(hp)/rpm):M : 441(600)/2100 - Combustion system: Direct injection - Aspiration: Turbocharger + intercooler - Starting system: Electric starting motor (24V 6.0kW) - Cooling system: Heat exchanger - Size of flywheel housing and flywheel: SAE #1 and 14 in.
BRAND: CUMMINS MODEL: KTA19 M3 POWER: 447,42 kW (600 hp) 1800 rpm Condition: New Features:, Flywheel housing ,Flywheel ,Governor ,Exhaust system, ,Cooling system ,Starter/Panel ,Water Pump ,Oil Filters ,Turbocharger Weight (kg) Engine: 2200 Dimensions (cm) 210 x110 x170
LISTING ID 22412 BRAND: CATERPILLAR MODEL: 3412 POWER: 537 kW - 720 hp 1800 rpm RPM: 1800 CONDITION: Used Running Take Out Features Flywheel housing Governor Exhaust system Cooling system Starter / Panel Engine Mounts Weight (dry): 2459
maximum number of results exceeded
please refine your search
