137,480 used machines on RESALE, but how to find them? Machine Search
Due to new motorization in the rotating state Removed The engine was installed by us at that time and from 0 to 53,000 turning hours with us very well fought
Engine A1050024 Motor for BOFA suction systems: Type: AD 500 IQ, AD 1000 IQ , AD 1500 IQ Engine A1050024 MA-201067 New original engine
On and including 1x pallet Auction-ID: A1-50889-114
Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards
ELECTRIC BOARDS GIFAS 63 Amp. 80 Amps And 32 Amp. (90% are 63 Amp.) All in compliance with C.E. In addition, about 20 pieces of West Electric 40 Amp panels, recent, without C.E.
Dear's Sale, used 2 diesel engine Ulstein Bergen BVM-12 Brgds Hakan KUSCU +905323642509
Dear's Sale, used 4 diesel engine WARTSILA 12 ZAV 40 S Brgds Hakan KUSCU +905323642509
Dear's Sale, used 2 complete engine WARTSILA 6R32D Brgds Hakan KUSCU +905323642509
used
Dear's Sale, used engine MITSUBISHI UEC 45 piston, main bearing, conrod bearing, etc. Brgds Hakan KUSCU +905323642509
Incl. accessories and pallet Auction-ID: A1-51519-1052
Diesel engine brand Caterpillar Type 3306T, Location: Brown Lenox K114 crusher, year of construction 1992, Accessories: Starter, Generator, Turbo, Engine is serviced and ready for use
Incl. accessories and pallet Auction-ID: A1-51519-1029
Engine Deutz 4-cylinder 75kw Identifier : - for scope of delivery and condition: See picture gallery The part is technically in good condition, nevertheless, this is a used items, which shows signs of wear. comes from: Extec Screens&Crushers 06 / 2007 Mileage: approx. 20 . tkm Internal number : 565 725
Incl. accessories and pallet Auction-ID: A1-51519-1028
Incl. accessories and pallet Auction-ID: A1-51519-1033
Incl. accessories and pallet Auction-ID: A1-51519-1035
Hello all We have 8 X Wartsila 12V32 LN engines available Year of build is 2007 In very good condition Also all major parts are available such as: Pistons, Liners, Cylinder heads, Con rods, Crank shaft Please contact us at : info@fin-marine for more info
MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine
Incl. accessories and pallet Auction-ID: A1-51519-1032
Incl. accessories and pallet Auction-ID: A1-51519-1050
Incl. accessories and pallet Auction-ID: A1-51519-1036
Incl. accessories and pallet Auction-ID: A1-51519-1054
Incl. accessories and pallet Auction-ID: A1-51519-1055
Incl. accessories and pallet Auction-ID: A1-51519-1051
Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg
Incl. accessories and pallet Auction-ID: A1-51519-1053
Incl. accessories and pallet Auction-ID: A1-51519-1034
Incl. accessories and pallet Auction-ID: A1-51519-1030
MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.
Incl. accessories and pallet Auction-ID: A1-51519-1091
Incl. accessories and pallet Auction-ID: A1-51519-1049
Incl. accessories and pallet Auction-ID: A1-51519-1031
We have available in our stock 2 units Wartsila Nohab WN 12V25 complete diesel engines 2760 Kw at 900 RPM Please contact us at: infofin-marine.com
Stamford Auction-ID: A1-47397-3504
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
maximum number of results exceeded
please refine your search
10 € 
