engine grinding used for sale

Grinding length max. 70 mm, clamping diameter max. in the hood 165 mm, headstock bore 28 mm, speed of the headstock spindle 500-750-1000 rpm

Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5)

I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same.

With flexible shaft, including spare parts

Nominal current 15 A, supply line fuse 25 A, control voltage 220 V, grinding length 500 mm, grinding width 200 mm, table longitudinal movement infinitely variable 1-24 m/min, table transverse movement infinitely variable 0.2-8.0 mm

Stone and belt grinding machine Motor power 900 watts. Speed 2950 rpm. Dimensions whetstone 200 x 32 x 30mm. Dimensions sanding belt 100 x 915 mm. Package sizes 62 x 54 x 30 cm. Weight 35 kg. Condition: never used / new (5)

Drill Bit Grinding Machine Grinding range 2 - 20 mm Acute angle min./max. 90 - 135 degrees Connected load 230 V Machine weight approx. 8.6 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5)

Washing screw stainless steel, sieve basket wash screw used, Manufacturer: unknown Diameter approx. 550 mm, Drive 1.1 kW Total dimensions approx. 6.5 x 1.3 x 1.7 m. The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

X-axis 457mm Y-axis 150 mm Z-axis 400 mm Grindstone: ± 200 × 20 × 31.75 mm Speed: ± 2640 rpm Power: ± 1.5 kW machine ready for transport and to be assessed on viewing day

Belt width 100 mm Strap length 915 mm Grinding wheel dimension 200 mm Work table: 170x125 / 265x15 mm Total power requirement 0.5 kW Machine weight approx. 26 kg Space requirement approx. 0.6 x 0.5 x 0.3 m Condition: never used / new (5)

Centerless grinding machine manufactured in 2008. This DANOBAT 327 MDA features a maximum wheel width for plunge grinding of 500 mm and a peripheral wheel speed of 50 m/s. It has a grinding wheel motor power of 55 kW and a regulating wheel speed that is infinitely variable from 10 to 225 min⁻¹. If you are looking to get high-quality grinding capabilities, consider the DANOBAT 327 MDA machine we have for sale. Contact us for further details.

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis JUNG J 630 E surface grinding machine was manufactured in 1999. It features a travel of 660 mm in the X-axis, 360 mm in the Y-axis, and 280 mm in the Z-axis. With a robust machine weight of 3000 kg, this machine is designed for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the JUNG J 630 E machine we have for sale. Contact us for further details.

This 3-axis JUNG JF 525 N surface grinding machine was manufactured in 2007. It features an X-axis travel of approximately 630 mm and has a machine weight of 2200 kg. If you are looking to get high-quality grinding capabilities, consider the JUNG JF 525 N machine we have for sale. Contact us for further details.

This 3-axis BLOHM JUNG JE 525 P surface grinding machine was manufactured in 2009. It features an X-axis stroke of approximately 600 mm and has a machine weight of 2200 kg. If you are looking to get high-quality grinding capabilities, consider the BLOHM JUNG JE 525 P machine we have for sale. Contact us for further details.

This 3-axis HEINZ STÖCKEL FD 1560 NC-T was manufactured in 2015. It features a maximum grinding area of 1200 × 600 mm and a maximum grinding height of 500 mm. The machine is equipped with a grinding spindle speed of 1400 min⁻¹ and can accommodate a grinding wheel diameter of up to 400 mm. If you are looking to get high-quality surface grinding capabilities, consider the HEINZ STÖCKEL FD 1560 NC-T machine we have for sale. Contact us for further details.

This 3-axis Tacchella Macchine Elektra 513 MPC was manufactured in 2000. It features a grinding diameter of 406 mm and a tips height of 130 mm, with a distance to points of 750 mm. The machine is designed for precision and durability, with a protection class of IP 54. If you are looking to get high-quality cylindrical grinding capabilities, consider the Tacchella Macchine Elektra 513 MPC machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2004. This STUDER S33 CNC features a Z-axis travel of 1000 mm and an X-axis travel of 285 mm. It is equipped with a grinding spindle diameter of 73 mm and can handle a maximum workpiece length of 1000 mm, with a weight capacity of 120 kg. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details.

grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...

MAKSYMALNA ŚREDNICA 320 MAKSYMALNY MODUŁ 6

MAX DIAMETER 320 MAX MODUL 8

Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Prior sale reserved - errors possible Internal Reference Number: D-1143-2

Prior sale reserved - errors possible Internal Reference Number: D-1143-3

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

May SS80 U Machine can be visited by arrangement under power

Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.

New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Surface grinding machine Make: LECHLER Model: 500 x 150

Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

Center height: 180 mm Grinding diameter: Ø 290 mm Distance between centers: 1000 mm Lots of equipment

grinding diameter: 250 mm grinding length: 600 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the s ...

New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.

Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels

Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm

Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad

MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm