engine cat type used for sale

Lauber Wood dryer longitudinal ventilation, type 4 K-7, Chamber with stacking trolley Contents of the wood dryer: The wood dryer holds 1 parcel with a width of 1.40 m 1 parcel in height of 1.25 m 1 parcel in length of 6.40 m The wood dryer has a total gross volume of 11.2 m³. The wood dryer holds 7.2 m3 of wood net, based on a wood thickness of 50 mm, a stacking strip thickness of 20 mm and 90% width utilization with edged wood. External dimensions of the wood dryer excl. control cabinet: Width: approx. 1.60 m Height: approx. 1.90 m Length: approx. 7.50 m Heating capacity 24.0 kW More info on request

We are selling here a cooking system from the manufacturer Schröter, type HR1 Wg in a very good used and functional condition. Runs on 400 volts, 45 kW, built in 1999, completely stainless steel, Reich digital control, incl. 2 cars, workshop checked, immediately ready for use, dimensions W/D/H 140/130/265 cm, others on request.

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

completely stainless steel Track width 800 mm 2 engines "JVM GmbH & Co.KG", type JV 156-250 Opening grille: dia. 14-22 mm Power: 2 x 0.95 kW Dimensions : ± 2,700 x 1,600 x 1,000 mm

Used Chain Conveyor Belt Manufacturer: BOA Type: 1500 HG 29°HTK 11770 Year of Make: 1997 Technical data of the chain belt conveyor belt: Drive power 3 kW Length of feed belt 650 mm Length of climbing strap 10770 mm Inclination: 29° Usable width 1400 mm Height of drive axle above ground 4,260 mm Height of sidewall riser strap, inside 800 mm

ID3425 MRS type 2-5 year/Baujahr 2019 6.4 t Motorized clamshell bucket with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, dredged approx. 200,000 cbm), inclusive identical bucket (built in 2008) as spare parts carrier (the predecessor of the new bucket) Motorized clamshell grab with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, excavated approx. 200,000 cbm), including identical grab (built in 2008) as spare parts carrier (the predecessor of the new grapple)

Screw Capper Dr. Datz with 4 capping heads, with electric height adjustment, Capacity: 8,000 bph, running direction: left-right, 28 mm closure

Edelmann Computer Print V38 Web - Web Offset Printing Machine - - Type: RF. RB 8"81 / 3" . 12″ - Year of construction: 11/1989 - Number of printing units: 3 -Colour - Paper web width: 380 mm - Print width: 38 mm - Speed: 170 u/h - Movement: Alcolor - Current: V380 / A-30 / 15KW / Hz:50 - With accessories - Location of the machine: Germany Well maintained machine Machine is technically and visually in good condition

We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.

turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inkjet Printer Videojet 1520/1560/1630 Different types Type 1520 Type 1560 Type 1630 Various consumables available (1 pallet) A total of 25 pieces Very good condition, straight from the production

Used cutter manufactured by Nowicki model KS B110 type 276 MM. New 2008. Zinastalled power 18.5 kW. Power supply 3x400V/50Hz. Max current 45A. Weight 500kg. Material - stainless steel.

SNACH PL01 Type 15213 Print Card

Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667

Mitsubishi Heavy Industries Ltd Type - SC1F ( Single Cylinder Single Flow ), Condensing Steam Turbine Power : 205.440MW HP Steam : 85 ata, 538 C LP Steam : 5.5 ata 193 C Steam Turbine Generator Model : MB-H Power - 241, 680 KVA Voltage - 16.5KV, 50 Hz

heavy 40s Gillardon with cross table

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight

13900 kg net weight List available on request

A-05. Gas Separation System (F-608) Partial system, 1 tank type OKFA 900.140.1.10°/900.MZ.C, Built: 2017 Complete system (control, etc.), functional, cleaned Manufacturer: Otto Klein Filtertechnik Apparatebau/Engineering GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.2m; Length approx. 5.0m; Mass 7.7t; Volume 2400 l; 140 bar; Maximum filling mass: 2377 kg Find more here - / Contact us at -

Sinel Systems Type A tube labeling machine suitable for conical products with a diameter of 16 - 40 mm and a length of 152.5 - 173.5 mm, label width 15 - 160 mm, label length 10 - 400 mm, with infeed roller conveyor for manual feeding of the tubes, label dispenser HERMA Type H400 R IDEA, label roll core diameter 76mm, label roll outer diameter max. 300mm, label dispensing speed 3 - 20 m/min., product presence control and stopper color control, Omron HMI operator control panel, Siemens S-7-1200 PLC, electrical connection 220V/ 500W, machine floor space 1650 x 780 mm (L x W), machine height approx. 1980 mm, Machine nett weight aprox. 210kg.

7 axes Max. spindle passage: Ø 16 mm Max. headstock stroke: 205 mm MAIN SPINDLE Spindle speed: 10000 1/min Spindle drive power: 3.7 kW Minimum C-axis resolution : 0.001 [degrees] SUB-SPINDLE - Max. rod end Ø: 16 mm - Spindle speed : 9000 1/min - Minimum resolution C-axis : 0.001 [degrees] TOOLS 5x Turning tool holder on linear slide 4x drilling unit incl. drilling holders (front/rear) 3x driven tools for transverse machining on linear slides 4x tools incl. drill holders for reverse side machining Driven Tools Speed : 7500 1/min Conveyor Bar Feeder FMB minimag 18/3200

dishwasher for dishes, Electrolux ELE 506065 type EPPWEASMS, 400 V, 13.5 kW BJ 2018, basket size 50×50 cm, automatic lowering and raising of the hood, 3 washing programs and 1 x continuous washing, self-cleaning cycle, digital display, electrical preparation for automatic washing Washing-up liquid – rinse aid dispenser, original price €17286.00 Dimensions 83x89x176 cm, minus 35% discount

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

for overhauling all types of shoes, tools incl.

Aluminium profile, 44m, only € 25/m, 90x90 L B Typ Nut 10 leicht, , used Top Special price ! For the purchase of the complete package of 44m we give you here an absolute best price. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition: The profiles were removed from a new machine that has never been in operation. Scope of delivery: 2 pieces 90x90x2900mm 4 pieces 90x90x2300mm 12 pieces 90x90x1160mm 14 pieces 90x90x1000mm

Bausch Advanced Type 529 IV bag filling & sealing machine with Telstar aseptic isolator system, sequence of operation: VHP Chamber (Decontamination) - Debagging/Bag loading table - IV bag infeed conveyor - Laser engraving - Robot loading - Starwheel transport - Gas purging – Filling (product tank/buffer vessel with 20 litre capacity, mass flow measuring system with 2 flow meters, filling accuracy +/-1.0%, CIP/SIP) - Stoppering - Discharge/Reject Robot - Discharge Chute - Reject Chute - Weigh station/discharge conveyor, Mettler Toledo IPC (in process check weighing) system is capable of performing 100% weight verification of each bag. Fully processed bags exit the discharge conveyor and are transferred to the MettlerToledo scale, where they are weighed. Allen-Bradley ControlLogix PLC with Caitron CR17 touchscreen, machine floor space 4590 x 2649 mm (LxW), machine working height 900+/-30 ...

Pinomatic cross conveyor for a planing and sawing line Year of construction 2001 Manufacturer Pinomtatic OY Type POS 9+10 S/N P1033 motorised cross conveyor with 7 chain hoists length of the arms: : 6000mm Width of the cross conveyor up to 4000mm ( variable adjustable ) Height: 900mm 6 chain hoists fixed mounted 1 chain hoist can be variably adjusted Voltage 230/ 400VAC

fully functional diesel emergency generator. We tested the functionality 2 times a year.

1 A+F butter carton packaging machine for 10 to 30 g parcels Capacity: 30,000 parcels/h packed in outer cartons Masch. Item No. 98097-A but without butter molding machine, is defective

2 almost identical, mobile loading bridges from 1.45 m to 0 Manufacturer Fa Butt, Factory No, 80110001281 A Year of construction 2010 Load capacity 7,000 kg

spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible.

Düperthal Safety Cabinet Type 90 W x D x H 120 x 60 x 206 cm Price incl. VAT You will receive an invoice with VAT. Shipping possible !

STORK PEGASUS ROTARY SCREEN PRINTER STORK PEGASUS ROTARY SCREEN PRINTER. TYPE 3200/24/20 .Year 2001 20 colours installed on a 24 position print block. Max printing width 3200mm Repeat sizes 640/914mm . Magnet System print paste application. Comprising : High entry with fabric guide rollers E+L KF 2020 edge guiders ,dust extraction unit. Reconditioned and upgraded January, 2024 Fabric passage onto a Curved Plate with Thermoplast , Wet Gluing.Belt Washing. STORK APOLLO Dryer ,Type 3200. 2 compartments ,Gas heated with support conveyor. Ext with fabric take off rollers and plaiter. Find more here - / Contact us at -

3M-Matic 800a-E Type 29600 (5799) Carton sealing machine for lid and bottom closure with adhesive tape, side belt belt drive system, carton format range in mm length 150 - ~, width 115 – 550, height 120 – 625, manual carton size adjustment, maximum carton weight approx. 38 kg, roll discharge with a length of approx. 1200 mm, drive laterally, electrical connection 380V/50Hz/3PH/1.4A, 260W, machine in mobile version on rollers, output up to 40 cartons per minute

Mixing tank type D 63 F Properties: Total height 1020 mm Width 400 mm Overall length 620 mm Installed motor power 0.18 kW from Mischtechnik GmbH, Ottobrunn Type V 1

Rotary valve 1.1 kW, as good as new

Mobile 150L vessel with passiv-doubleflap. In M4V steel.

22,000 l/h Homogenizer GAULIN Properties: Length 2300 mm Width 2000 mm Total height 1800 mm Weight 10000 kg Volume 22000 l Technical Documentation Yes Serial No.: 82L 31784 Max. pressure 190 bar Capacity 22,000 l/h

22,000 l/h Homogenizer GAULIN Properties: Length 2300 mm Width 2000 mm Total height 1800 mm Weight 10000 kg Volume 22000 l Technical Documentation Yes Description: TYPE 5812 MC 45- 2.5 TPS Serial No.: 82L 31785 Max. pressure 190 bar Capacity 22,000 l/h Engine power: 130 kW Gear ratio: 5.35 Crankshaft speed: 66-184 rpm Piston Diameter: 3" Number of packs per flask: 2 NO.: 504764 Connection suction side: DN 65 DIN 11851 Connection outlet side: DN 65 DIN 11851

Compressor Type Q52 - 8.0 W Properties: Type Q52 - 8.0W Identification number 052-000103 Order no. 14988/ 14989 Compression medium AIR/LUFT Length 2500 mm Width 1800 mm Total height 2000 mm Weight 2600 kg Volume flow 51.6 m³/min Suction pressure 1 bar Full load current 525 A Step pressures 8 bar g Speed 60600 min ̄¹ Installed motor power 300 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz

Dryer Type SD 085W Type 419 Properties: Type SD 085W Type 419 Machines Serial No. 003 / 14279 / 07 Overall length 900 mm Width 900 mm Total height 1900 mm Engine power 1.36 kW Description: Refrigerant: R 134a / 1.50 kg P SHP 20 bar P SLP 16 bar t o +2/ +50°C Compressed air: p s 16 bar t s 60 °C t o +2/ +50°C 220-230V1N ͂/50Hz 1.36 kW 16A / IP 20 RWTÜV Reg. No. 2541/98

WEIGHING COFFEE BEANS OR GROUND COFFEE FROM 100 G TO 2000 G - REVISION MACHINE

Counting scale Fabr. TOLEDO Type 4652 Specifications: Kns Ujikbg Herhyxksb Maximum load 20 kg Counting function 1:9 / 1:99 External dimensions approx. 650 x 350 x 600 mm

Key data: 3000 , 702 , 60

Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg

Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3

Control: Siemens 840 D weight of the machine ca.: 13,5 t dimensions of the machine ca.: 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rumed Type 3300 Refrigerated Incubator • Manufacturer: Rubarth Apparate GmbH, Laatzen (Germany) • Type: 3300 • Serial number: 72258.4 • Year of construction: 1996 • Power: 1.0 kW • Operating voltage: 230 V / 50 Hz • Current consumption: 4.4 A • Refrigerant: R134a • Filling weight: 0.99 kg •Ab. Operating overpressure: 18 bar • Made in Europe, CE marked Description & Areas of Application: The RUMED Type 3300 is a professional cooled incubator for laboratory applications. Ideal for: • Microbiological cultivations • Long-term storage of samples • Air-conditioned stability tests • Research and development Dimensions inside: W/D/H: 575/550/510 mm Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and u ...