127,294 used machines on RESALE, but how to find them? Machine Search
Alup Kompressoren GmbH screw compressor, type: SCK60, serial number: TRU127843, year of construction: 01/2017, 380 V, 50 Hz, 45 kW, capacity: 6.1 m³ per minute, 10 bar, dimensions: 1300 mm x 1000 mm x 1770 mm.
Sepamatic separator, type: SEPA 2000 T, machine number: 196904/1, year of construction: 10/2020, 400 V, 50 Hz, 15 A, 7.5 kW, weight: 1400 kg, drum diameter: 300 mm, perforations: 1.3 mm, total dimensions: 1300 mm x 1300 mm x 1700 mm.
Scanvaegt / Norfo portion cutter, type: 3898.80.0392, number: D.80.224, year of construction: 2008, 400 V, 3 Ph, 50/60 Hz, 14/32 A, 6 kW, plastic belts, belt width: 300 mm, clearance: 350 mm x 110 mm, total dimensions: 3000 mm x 1900 mm x 1470 mm.
Multivac top and bottom labelling machine, type: L310, machine number: 260232, year of construction: 2018, 230 V, 50 Hz, type labelling units: (2x) LD200, plastic belt, belt width: 290 mm, total dimensions: 1800 mm x 1100 mm x 1880 mm.
Webomatic thermoformer, type: APS ML-7100, machine number: B 6513ML285, 400 V, 3 Ph, 50 Hz, 32.0 A, 21.0 kW, dye: (2x) 380 mm x 290 mm, plastic belts, belt width: (2x) 270 mm, plastic outfeed belt, belt width: 560 mm, 2 Busch vacuum pumps, type: (1x) WV 0500 B 0ZI KAGG, (1x) 100-132, total dimensions: 7650 mm x 1280 mm x 2100 mm.
Cabinplant 24 heads multihead weigher, type: MHW 40-24, year of construction: 2016, weight: 1100 kg, dimensions: 2300 mm x 2400 mm x 2500 mm. Without display.
CES Group nitrogen freezing tunnel, type: CES-LT-LIN-8mx0.66-PODB, year of construction: 2-12-1998, 380 V, 3 Ph, s/s mesh belt, belt width: 1570 mm, clearance: 1500 mm x 140 mm, total dimensions: 13750 mm x 2300 mm x 1700 mm. Including s/s switch cabinet, dimensions switch cabinet: 2250 mm x 310 mm x 850 mm and Danfoss frequency convertor, dimensions frequency convertor: 250 mm x 200 mm x 500 mm.
Multivac traysealer, type: T700, serial number: 169932, year of construction: 2013, 400/230 V, 3 Ph, 50 Hz, 18/32 A, 4.2 kW, film width: 280 mm, plastic mesh infeed belt, belt width: 200 mm, dye: (4x) 230 mm x 160 mm, plastic outfeed belt, belt width: 250 mm, total dimensions: 4850 mm x 850 mm x 2050 mm, Eurovacuum vacuum pump, type: EV-O175F, capacity: 175 m³ per hour, dimensions: 900 mm x 750 mm x 400 mm, s/s trolley for dye sets, dimensions: 1500 mm x 750 mm x 1350 mm, s/s frame with additional dye set, dimensions dye: (4x) 230 mm x 160 mm, dimensions frame: 2100 mm x 500 mm x 1250 mm, pallet with parts, 14 pallets with plastic trays, dimensions each tray: 230 mm x 140 mm x 35 mm.
CES Group liquid nitrogen freezing tunnel, type: CES-LT-LIN-8mx0.66-PODB, serial number: CES 238, year of construction: December 1998, 400 V, 3 Ph, 9 kW, weight: 3500 kg, plastic mesh belt, belt width: 680 mm, clearance: 640 mm x 50 mm, total dimensions: 5850 mm x 1450 mm x 2880 mm.
Hitec BV pasteurizer, type: Steamer 450/4000E, serial number: 20212536, year of construction: 2021, 74 kW, s/s mesh belt, belt width: 440 mm, with switch cabinet, dimensions: 1400 mm x 800 mm x 400 mm, total dimensions: 5300 mm x 1100 mm x 1400 mm.
The Gierth ATOMSCOPE 903 is a portable X-ray machine that is mainly used in veterinary medicine, especially for mobile applications such as horses or in small animal practices. Unchecked from practice Closure Auction-ID: A7-46327-8
Good condition Auction-ID: A7-46327-66
This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information.
TNW Super Condor type 40 pillar drilling machine ; automatic version suitable for precise drilling work ; Voltage: 380 volts ; Speed: 60–1350 rpm ; Recording: MK-4 ; Extension: 350 mm ; Table size: 480 x 410 mm Auction-ID: A1-45170-24
Batch of industrial printed circuit boards / plug-in cards (PCB modules), various types Auction-ID: A1-46070-120
Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!
Key data: 130 mm
Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.
\" Sheet metal testing device type 214 – built in 1988 – Made in GDR – with base frame Mechanical sheet metal testing device for material testing of sheet metal. Manufacturer: (Logo Klingenthal, GDR) Type: 214 Colour no.: 169 Year of manufacture: 1983 Origin: Made in GDR • Mechanical testing device with large handwheel • Adjustment scale on the handwheel (fine adjustment) • Analogue dial gauge display • Solid industrial design • Mounted on a stable steel base • Power supply is not used, typically used for testing sheet metal specimens (e.g. forming/bending testing). \" Auction-ID: A7-46417-304
CONTROLS CNC controls NUM 1060 M WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 2 X-axis travel: 3000 mm Y-axis travel: 2010 mm Z-axis travel: 2000 mm rotating range A-axis from: 92.5 ° rotating range C-axis up to: 360 ° TABLE table surface (left-right): 1450 mm table surface (front-back): 1600 mm FLOOR PLATE total weight approx.: 12000 kg SPINDLE / HEAD spindle revolutions (max): 3000 /min tool fixture: ISO SK 50 drive power: 37 kW AXIS DRIVES traverse velocity X (max): 25000 mm/min traverse velocity Y (max): 25000 mm/min traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz ATTACHMENTS chip conveyor: yes through spindle coolant attachment: yes
Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up oper ...
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-30
x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach
x-travel:2000 mm y-travel:800 mm z-travel:800 mm table-size:2.000 x 700 mm workpiece weight:3500 kg drive capacity - spindle motor:17 kW spindle cone:50 ISO spindle turning speed range:3000 U/min dimensions of the machine ca.:5265 x 3250 x 2730 m weight of the machine ca.:9 t CNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ...
LOT 2 Type: Industrial metal hall Year of construction: 2026 Material: Steel construction Total area: 420 sq m Overall dimension (1): L 14000 mm Overall dimension (2): L 30000 mm Height: 5000 mm Ridge height: 7000 mm Additional information: Roof slope: 20 degrees; Painted RAI 5023; The structure consists of 2 beams (trusses) at the ends made of IPE 160 profile; 5 intermediate beams (trusses) from IPE 220 profile; 4 end posts from IPE 160 profile; 10 intermediate posts from IPE 220 profile; 4 door posts from square pipe 100x100x4; 6 pressure uprights from pipe 76x4; wind bracing for beams and columns made of galvanized steel with 16 mm tensioner; The whole structure is assembled with bolts (removable); Condition: unused; The structure includes a certificate of conformity for materials, construction draft, and foundation plan; An 8-ton forklift is available at th ...
x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table
spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling
spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm Speed of boring spindles:1,25 - 1250 U/min. ram stroke:700 mm dimension of the ram:340 x 340 mm mm spindle taper ISO:50 rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m CNC control Siemens 840 Dsl completely modernized 2010 FIBRO CNC drilling work table 2500 x 2500 mm 50 to. workpiece weight Longitudinal travel 2500 mm Angular milling head 4 x 90° Universal angular milling head Panel area approx. 10000 x 5000 mm Chip conveyor and coolant device Aerostatic guides
x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m Machine is in nearly new condition and was completely modernized in 2020! With CNC SIEMENS 840 D Automatic tool magazine for 153 tool positions Automatic milling head magazine for 6 milling heads Machining module ? straight ? straight long ? Machining module ? angle standard ? 4000 rpm, 144 x 2.5°, ISO 50 Machining module ? narrow angle extended ? 40 kW, 4000 rpm, 1800 ...
bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel
spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg
x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 Lifting operator platform External tool cooling Spindle clamping support
spindle diameter:150 mm x-travel:3.000 mm y-travel:2.000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 mm column travel:1.500 mm high speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/min table surface area:2.000 x 2.500 mm max. table load:25.000 kg rapid traverse speed:5/10 m/min feed speeds:1 - 1.500 mm/min faceplate speeds from - to:3,2 - 140 U/min dimensions of the machine ca.:8,4 x 6,8 x 5,9 m weight of the machine ca.:57 t total power requirement:100 kW Full B-axis Aerostatic guides Coolant system with IKZ
spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.
spindle diameter:150 mm x-travel:10000 mm y-travel:2500 mm bore spindle stroke:700 mm ram stroke:700 dimension of the ram:340 x 340 mm spindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min. feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:5 m/min total power requirement:120 kW weight of the machine ca.:115 t dimensions of the machine ca.:15,1 x 10 x 6,4 m with CNC SIEMENS 840 Dsl complete retrofit in 2010 FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity, longitudinal movement 2500 mm, angular milling head 4 x 90° universal milling head floor plate area ca. 12000 x 6000 mm ( 72 m²) chip conveyor and coolant attachment aerostatic guideways
spindle diameter:150 mm x-travel:3000 mm y-travel:2000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 column travel:1500 mm spindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/min table surface area:2000 x 2500 mm max. table load:25000 kg rapid speed:5 / 10 m/min feed speeds:1 - 5000 mm/min total power requirement:100 kW weight of the machine ca.:57 t dimensions of the machine ca.:8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply
spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-axis:1520 mm w-axis:1000 mm table surface area:2000 x 1800 mm workpiece weight:8 t spindle motor:18 kW spindle taper ISO:50 spindle turning speed range:4,5 - 900 U/min faceplate diameter:785 mm rapid traverse:5 m/min total power requirement:40 kW dimensions of the machine ca.:5,5 x 6,9 x 5,2 m weight of the machine ca.:35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster
spindle diameter:120 mm x-travel:1250 mm y-travel:1250 mm z-travel:800 mm W-axis (spindle longitudinal):600 mm Speed of boring spindles:1- 2000 U/min. spindle taper ISO:50 table surface area:1000 x 1000 mm total power requirement:55 kW weight of the machine ca.:18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment
x-travel:2000 mm y-travel:1500 mm z-travel:1460 mm milling spindle motor:35/30 kW spindle taper ISO:50 spindle turning speed range:24 - 3000 U/min table surface area:1350 x 1550 mm table load:6 t feed speeds:10 - 3000 mm/min rapid speed:10 m/min total power requirement:48 kW weight of the machine ca.:24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head
x-travel:6500/13150 mm y-travel:4000 mm z-travel:1250 mm w-axis:2250 mm table surface area:5500/12150 x 3000 mm max. workpiece weight:70.000/105.000 kg ram head dimension:480 x 510 mm milling spindle motor:63 kW max. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/min feed speeds:1 - 24000 mm/min w-axis:1 - 6000 mm/min. distance between columns:3500 mm passage:3000 mm total power requirement:120 kW weight of the machine ca.:245 t dimensions of the machine ca.:29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, ...
spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment
This 7-axis Citizen Cincom A320-VII mod. A20-3F7 was manufactured in 2019. It features a maximum workable diameter of 20 mm, with an option for 25 mm, and a maximum workable length of 200 mm. The machine is equipped with a Fanuc 32i CNC control and includes a bar feeder, high-pressure coolant system, and a chiller. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom A320-VII machine we have for sale. Contact us for further details.
Crawler axle, crawler chassis, mini excavator, tracked excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -tensioning cylinder
grass catcher, collection container, mower deck, lawnmower, cutter bar, disc mower -without a fan -for side ejection -Dimensions: 1500/800/H1400 mm -Weight: 100 kg
maximum number of results exceeded
please refine your search
600 € 
