engine cat type used for sale

High Speed Bench Drill, Made in Germany -Clamping table: 290 x 225 mm -Travel distance: 150 mm with hand crank -Spindle mount: Drill chuck included -Drilling capacity in steel D 1 - 6 mm -Projection: 180 mm -Speeds: 900 - 10,000 rpm 8 steps -Column: Diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Voltage: 380 V -Dimensions: 640/330/H740 mm -Weight: 92 kg

Column drilling machine ALZMETALL ALZSTAR 30/S Year of Make: 2012 Drilling capacity in steel 30 mm Threading in ST 60 M16 Clamping surface table 514 mm x 360 mm Guard Drilling depth 140 mm Spindle mount MK 3 Spindle speeds 225 rpm – 4300 rpm infinitely variable with digital display Drill Table Lighting 1 drill chuck up to 13 mm Machine vise

CONTROLS   CNC controls TRAUB TX8I-S BASIC FUNCTIONS   number of spindles: 2   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   turning diameter (max): 20 mm   bar diameter (max): 20 mm MAIN SPINDLE   spindle revolutions (max): 10000 /min   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 10000 /min   c-axis: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (TURNING)   chip conveyor: yes   through spindle coolant attachment: yes   hydraulic system: yes   European CE standards: yes - Interchangeable operation: Can be used as a short- or long-turning lathe Equipment: Number of axes: 12 (15) - Main spindle C - Sub-spindle D20 with X/Z/C axes - Upper tool gantry with X/Y/Z/H/B axes and 8 tool holders - Lower tool gantry with X/Y/Z/H axes and 8 tool holders - Coolant system with 20 to 80 ba ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Cross420 mmLongitudinal700 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmDrive power (40% DC) 8,5 kWToolchangertoolchangerType of magazine WheelNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40b ...

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

FLOTT SB 25 STV column drill press was built in 1991 in Germany by Arnz Flott GmbH Werkzeugmaschinen. This extremely efficient machine enables the drilling of precise holes with a maximum diameter of 25 mm in steel and a maximum diameter of 30 mm in cast iron. The machining process is performed by a work head with a reliable spindle, rotating at a maximum speed of 2000 rpm. As many as 6 spindle speed adjustment stages enable precise adjustment of the parameters to the type of workpiece. The work table, in turn, has height adjustment and can be fully rotated around the column. All this makes the FLOTT SB 25 pillar drill the perfect solution for production plants and workshops. The total weight of the machine is approximately 300 kg. Technical specifications of FLOTT SB 25 STV drilling machine - maximum drilling diameter (cast iron): 30 mm - maximum drilling diameter (steel): 25 mm - ...

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

Key data: 35 mm, 280 mm, 180 mm

Column drilling machine ALZMETALL AB 3 ES – Powerful & immediately ready for use For sale is a high-quality column drill from the renowned manufacturer Alzmetall, model AB 3 ES. The machine impresses with its robust design, precise operation and reliable performance. Ideally suited for workshop, metalworking and industrial applications. General information: Machine Type: Column Drilling Machine Manufacturer: Alzmetall Model: AB 3 ES Condition: Used, good general condition, fully functional Shipping time: Immediately available Technical data: Drilling capacity in steel: approx. 35 mm Projection: approx. 280 mm Drilling stroke: approx. 180 mm Recording: MK 3 Speed: Infinitely variable Table size: approx. 600 × 470 mm Equipment: • Drilling depth stop • Drill chuck Machine data: Dimensions (L × W × H): approx. 1200 × 800 × 2100 mm Weight:  ...

Mobile storage rack with 90 storage bins Dimensions of the red storage bins 9.5 x 16 x 9.5 cm. Dimensions of the blue storage bins 9.5 x 16 x 9.5 cm. Dimensions of the yellow storage bins 12 x 22 x 11.5 cm. Dimensions of the wheels 75 x 20 mm. Total dimensions 67 x 52 x 133 cm Condition: never used / new (5) Auction-ID: A1-45681-800

Machine vise with turntable. Jaw width 100 mm Clamping range 100 mm Clamping height 38 mm Weight 12 kg Dimensions L x W x H 260 x 140 x 120 mm Condition: never used / new (5) Auction-ID: A1-45681-865

Universal tool trolley with 6 storage locations. Overall dimensions 99 x 40 x 87 cm. Container dimensions. 26 x 40 x 16 cm. Inner dimensions container 23 x 35 x 15.5 cm. PP material (polypropylene) Equipped with four wheels, two castors with brakes. Condition: never used / new (5) Auction-ID: A1-45681-888

Shelf with 60 storage boxes. External dimensions of the boxes 100 x 295 x 105mm. Packaging dimensions 420 x 340 x 930mm. Weight approx. 30 kg. Storage spaces 60 boxes Weight 30 kg Dimensions L x D x H 780 x 320 x 1670mm Condition: never used / new (5) Auction-ID: A1-45681-729

Dimensions of the containers 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. Thickness of the MDF top board 10 mm. PP material (polypropylene) Storage locations 12 boxes Condition: never used / new (5) Auction-ID: A1-45681-721

Dimensions of the containers 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. Thickness of the MDF top board 10 mm. PP material (polypropylene) Storage locations 12 boxes Condition: never used / new (5) Auction-ID: A1-45681-762

Air Nailer BEA W15 Type 358, max. 8 bar

Pneumatic Stapler BEA B15 Type 358, max. 8 bar

Pneumatic Stapler BEA B15 Type 358, max. 8 bar

Wet stone cutting table CEDIMA or type designation

Wet stone cutting table CEDIMA or type designation, crack in the lowering arm

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Bottle washing machine MAG Type Sirio 8 with 10 bottles per row capacity: 3.000 – 11.000 bph Year of manufacturing: 1990 suitable for 0,2 ltr. – 1,0 ltr. bottles The machine is available from December 2026.

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-45761-892

Stock Laminating machine, Type: 134R5-1500 P, Year 2001, Max.Size: 1420x1620 mm, Min.Size: 500 x 500 mm, Printers sheet:, Paper from about 180 g/m², Carton from about 400 g/m², Carrier sheet:, corrugated cardboard up to about 7.0 mm thickness, Cardboard/Chipboard from 0.6 mm

Drill Grinder KAINDL Schleiftechnik Typ BSG20/2 Bj. 2021-012, S/N 22104, Benchtop Tool

Mobil-Leeb hardness tester SAUTER HMM Type D 2013, S/N HMM120000087, case

WITTMANN Tempro 2 Type TN2A3A1B00000100, S/N 100 temperature control unit

Temperature control unit HB-THERM Series 4 type HB-100U1 built in 2008, S/N 810-5700, max. 30 kW

Temperature Control Unit HB-THERM Series 4 Type HB-100U1 Year 2007, S/N 712-2053

Heavy Duty Column Drill Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable - Stage 1. 130 - 480 rpm - Stage 2. 480 - 1750 rpm - 3 feeds 0.1; 0,2; 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Height adjustable via rack with hand crank - Separate coolant device - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg

This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details.

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/-Z5ryHlumUY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 24/11/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45450-309

This 5-axis SACHMAN TS10 bed type milling machine was manufactured in 2025. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details.

This 3-axis TIGER TFA6 Bed Type Milling Machine was manufactured in 1998. It features a longitudinal travel of 2000 mm, transversal travel of 1000 mm, and vertical travel of 1000 mm. The machine is equipped with a Heidenhain TNC 426 CNC, a manual bi-rotary head, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the TIGER TFA6 machine we have for sale. Contact us for further details.

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/Qg1_SYz7g8Y - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 30/10/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45450-305

This 3-axis DEBER BTM 5A was manufactured in 2000. It features a continuous rotary table with a size of 1,500 x 1,000 mm and a maximum spindle speed of 3,000 rpm. The machine is equipped with a twin-spindle head and an automatic tool changer, enhancing its operational efficiency. If you are looking to get high-quality honing capabilities, consider the DEBER BTM 5A horizontal honing machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-20 bed type milling machine was manufactured in 2005. It features a substantial table size of 2,000 x 800 mm with a maximum table load of 4,000 kg. The machine offers impressive X-axis travel of 2,000 mm and rapid traverse speeds of 25,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-20 machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-A20 bed type milling machine was manufactured in 2005. It features a longitudinal traverse of 2,000 mm, a cross traverse of 1,000 mm, and a vertical traverse of 800 mm. The machine is equipped with an automatic indexing head and a spindle speed range of 20 to 4,000 rpm. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-A20 machine we have for sale. Contact us for further details.

This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis Eumach LBM-2000 was manufactured in 2013. It features a generous table dimension of 2100 x 1600 mm and impressive axes strokes of 2200 x 1750 x 650 mm. The machine is equipped with a HEIDENHAIN controller and offers a maximum rotation speed of 18000 rpm. If you are looking to get high-quality milling capabilities, consider the Eumach LBM-2000 bed type milling machine we have for sale. Contact us for further details.

Stake pallets FEIL Mobibloc type EE payload 1,500 kg built in 2021, stacking factor 4 times 1 + 3 = tube length 1,200 mm, 12 pcs., without contents

This 3-axis Eumach LBM-1500 bed type milling machine was manufactured in 2012. It features a generous table dimension of 1600 x 1000 mm and impressive axes strokes of 1750 x 1000 x 650 mm. With a rotation speed of 18000 rpm and a forward speed of 10000 mm/min, this machine is designed for high-performance milling applications. If you are looking to get high-quality milling capabilities, consider the Eumach LBM-1500 machine we have for sale. Contact us for further details.

Temperature control unit E. BRAUN Control type BT9W, 400 V/50 Hz, 6/9 kW heating, year 1998, S/N possibly 2471 (difficult to read), internal No. 056

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

PROTEIN MACHINE TYPE MICROPLATE READER BIO-TEK 800 TS Absorbance Reader with Gen5RC 1 Unit Detection modes: Absorbance Microplate types:6- to 384-well plates Temperature control: To 50 °C (I” configuration) Read speed:11 secs /96 wells (sweep mode) Brand: BioTek With Computer UPS 1.0KVA CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove.com

Temperature control unit HB-THERM Series 4 type HB-100U1, S/N 810-5699, max. 30 kW

Temperature control unit HB-THERM Series 4 type HB-100U1, year 2007

This compact and high-performance machine stands out for its optimised dimensions of 1100 x 1270 x 650 mm and a weight of 255 kg, offering both robustness and manoeuvrability. It has a cutting width of 800 mm and an adjustable height between 20 and 150 mm, allowing precise adaptation to different types of terrain and vegetation. With a travel speed of up to 5 km/h, it ensures high working efficiency with a mowing capacity of up to 3,800 m² per hour. Its 24 V and 40 A power supply system, combined with self-generated energy, ensures long-lasting and autonomous operation. The machine is equipped with a Loncin 608 engine that complies with EPA/Euro 5 standards, developing a power of 23 HP. Its 7.1-litre fuel tank and 1.2-litre oil capacity ensure a good range of use. Designed for comfort and safety, it offers remote blade adjustment as well as a remote-controlled blade lift. It can oper ...

WITTMANN TP-BA:90 Type TP1A3A1L00000300, YOC 2006, S/N 0000093138