We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,303 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Mix tank Volume : 3000 L Mixing : High Shear Motor : 14 HP Mnufacture date : 2012 Condition : Never Used Heated : Hot water 90c Cooled : Cold water
used
Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm
new
Electrically heated box furnace, make VEI-Engineering type: LU temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t
used
V2 Engineering Cadence 15 cases per min Cash box format: Opening width from 150 to 550 mm Insertion length from 110 to 350 mm Height from 100 to 350 mm Product format: Width from 25 to 540 mm Insertion length from 70 to 220 mm Height from 10 to 150 mm
used
Description Volumetric dispenser production: 1,0 - 15,0 Kg/h hopper capacity: 25 L auger diameter: 30 mm pitch 25 mm power supply: 230 V - 50 Hz power: 0.18 Kw
used
Description Volumetric dispenser production: 1,0 - 15,0 Kg/h hopper capacity: 25 L auger diameter: 30 mm pitch 25 mm power supply: 230 V - 50 Hz power: 0.18 Kw
used
Description volumetric dispenser production: 1-15 Kg/h hopper capacity: 25 Lt Auger : diameter 30 mm step 25 mm (1") 220V power supply Power 0.18 Kw
used
Description volumetric dispenser ENGINE PLAST DPM 15/30 production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw
used
Description volumetric dispenser ENGINE PLAST DPM 15/30 production: 1-15 KG / H hopper capacity: 25 LT auger diameter 29 mm pitch 22 mm power supply 220 V power: 0,18 Kw
used
Description volumetric dispenser ENGINE PLAST DPM 15/30 production: 1-15 KG / H hopper capacity: 25 LT auger diameter 30 mm pitch 25 mm power supply 220 V power: 0,18 Kw
used
Description Inlet size: 480 mm x 600 mm Cutting Chamber Size: 410 mm x 600 mm Engine power: 18.5 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 10 mm Material extraction: collection drawer with hole for suction. Electrical panel with soft start, new blades.
used
Description Regranulation Line complete of granulator Extruder Diameter 60 L/D 35 Silos for forced feeding of film Granulator 35/45 Vent Screen changer Centrifuge
used
Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation.
used
There are two pipe pasteurisers available, including storage tank, capacity: 7000l.
used
There are two identical vibrating screens available.
used
Max. working width: 650mm, working height: 910mm, running direction: right to left, feed rate: 0.2-4m/min, connected load: 22kW, length: 4720mm, width: 1510mm, height: 1300mm, with documentation.
used
Working width: 650mm, working height: 910mm+/- 30mm, capacity: 50 circuit boards, connected load: 0.2kW, length: 640mm, width: 760mm, height: 1000mm, with documentation.
used
Maximum cutting capacity : ø 6mm (18 pieces) - ø 40mm (1x) at 850N/mm2; equipped with 1 feed magazine with overflow platform, supply roller conveyor, maximum length: 14,000mm; discharge roller conveyor with hook row ( 1A and 2A); length measuring system with BECKHOFF touch screen and PLC control box; The entire body must be professionally dismantled by the buyer
used
Ultrafiltration Membrane filter device for the clarification of all kinds of fruit juices. manufacturer: Mabex Engineering GmbH type: UF412 dynamic cross-flow filtering. Mabex tubular membranes in bundles A-19. filtering capacity 12,000 l / h electric power 26 kW water supply capacity 80m3 / h compressed air 6 bar The device is complete and functional. Technical Documentation Software We send photos at the customer's request.
used
KEMWALL ENGINEERING POWDER PRESS Year: 2002 CE Marked: YES Model: KC 21/12 Voltage: 415V Frequency: 50 Hz Serial No: P6-5/4864
new
Coffee-tech FZ94 Manufactured in 2020, delivered in 2021 In perfect condition. 230V 50/60 Hz Electricity 3 independent heating elements for a total of 3600W Adjustable airflow and drum rotation speed Fast cooling Low electricity consumption Possibilities with Artisan and Cropster softwares : - Roasting curves logging (3 probes) - Airflow and drum rotation speed control - Automatic heating shutdown at the set temperature - Semi-automatic curve replication Shipping possible with extra-cost. Also available for sale: various Coffee-Tech Solar and Avirnaki
used
42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling
used
Piston Bergen B Gudgeon pin Ø145 mm RR No. 702513
used
Hot runner control unit - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling Price: On request
used
Available in stock 3 x NEVER USED Capstone Pressure Transducers. 1 x Omega Engineering model PX309-100GV + 2 x Omega Engineering model PX319-100GV Most commonly used for Microturbines C30. The equipment was NEVER USED and is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Manufacturer: SM Engineering Type: KMB Year of construction: 1998 Working width: 495 mm Max. roll diameter: 500 mm Dimensions: 1600 x 2000 x 1800 mm
used
Manufacturer: SM Engineering AG Type: KBM Year of construction: 1998 Working width 495 mm Overall size: 1600 x 2000 x 1800 mm Electrical data: 3x400 V; 50 Hertz Operating pressure: 6 bar The machine is suitable for cutting off various films and other materials.
used
5369 – HYDRAULIC SHEET METAL PUNCHING DEVICE With space for 9 hydraulic tools Manufacturer: ENDI Engineering Kft Type: LBS-20 Year of construction: 2004 Operating pressure: 200 bar Voltage: 380V Electrical power: 1.5 kW Weight: 378 kg
used
DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...
used
Other Info: 1 MHG - SMG 25 Shotblasting MACH-ID 7660 Make: MHG Type: SMG 25 Shotblasting
used
Blackrow Engineering Mobile drum breader Type: Drum coating conveyor Serial number: 5074-129034 Year of construction: 2016 S/S mesh belt Belt width: 400 mm Total dimensions: 3100 mm x 1370 mm x 1750 mm. Please message for more details
used
Sell BGAA used amine scrubbing from the manufacturer DGE with a capacity of 500cbm raw gas. Built in 2009. Plant is out of order and conserved. System is complete incl. dryer. If you have any questions, please contact us by phone
used
Cutting power / Schnittkraft: 55 ton. Hole punch / Lochstanze: 200 x 15 mm steel sheet metal / Flachstahl. Flat steel shears / Flachstahlschere: 230 x 20 mm â 375 x 10 mm. Angular cutting / Winkelschneiden: 90° 125 x 13 mm â 45° 70 x 10 mm. Overall dimensions / Abmessungen: 1.600 x 710 x 1.700 mm.
used
Main specifications production line: Method: Hotmelt on top of material by coating rolls Machine is designed for coating on rubber and foam materials Coating 20-400 gr/m2 on materials of 2-100 mm Corona treatment included Reinforcement web possible Covering with siliconized liner possible Trimming sides by cutting units possible Material width max 1440 mm Controls: PLC / touchscreen Condition of the machine is like new, barely used (61 hours total production time) The equipment can be powered for test and inspection, all the parts of the equipment are positioned and aligned. Max and Min coating width is 1440 mm, the minimum is not limited.
used
Pre-stretch is the process that allows stretch film to be stretched before being applied to a load. It is only 5 µm - 8 µm thick, it is very strong and tear resistant. In case of the pre-stretch, less film is required to wrap a pallet than in case of any standard products. As much lower quantities of the product are used to wrap the load, this provides for substantial financial savings. The main advantage of the machine is pre-stretch effect while winding. According to technical tasks film tension may reach 400%. The machine enables stable work and average output of 50 tons pre-stretch film per month. It is the best choice for getting hand and machine pre-stretch film rolls. Thickness of the film 5â¦30 mm Mechanical speed 1200 m/min Rewinding inaccuracy regardless of the rewinding length 1.0 m Maximum pre-stretch 400% (1m=5m) Finished roll diameter, at most 250 mm ...
used
This advanced packaging machine is designed to efficiently and precisely fill plastic or glass jars with bulk products. Made in the USA, this machine automates the entire packaging process, including jar retrieval, product dosing, membrane sealing, and cap tightening. With a production capacity of approximately 1500-2000 jars per hour, it is ideal for high-volume production. Heres a detailed overview of its functions: 1. Jar Retrieval: The machine features an automated system for handling both plastic and glass jars. Jars are picked from the supply and positioned for the filling process. 2. Product Dosing: Equipped with a highly accurate dosing system, this machine ensures precise filling of the jars with bulk products such as spices, coffee, tea, grains, or sugar. The dosing system can be adjusted to meet specific product weight or volume requirements. 3. Membrane Sealing: A ...
used
Glass Bottle Filler-Capper 400 bph for Beer, Fully Automatic - 2016 This very good condition filler-capper was built by Norwegian HH Engineering in year 2016 and it has been filling beer in 330ml and 500ml glass bottles. The line is very compact in size and it has wheels for easy moving. It has four vertically moving filling nozzles which are built as counter-pressure fillers and which then allow the customer to fill both carbonated and non-carbonated beer with the same machine. Filling nozzles have inbuilt air pre-evacuation system with CO2. Machine is also compatible with several bottle sizes as well as standard longneck 0.5l and 0.33 bottles. It has a single head crowner for 29 mm caps. Operation is controlled with a Allen-Bradley PLC. Manufacturer HH Engineering AS Manufacturing year 2016 Current status Dismantled Capacity 400 bph Bottle sizes 330ml and 500ml longneck ...
used
General SKU305U616 LocationBarneveld MakeSTC Engineering TypeStapelbehälter No.6003 Year of construction2005 Pressure Working pressure0.14 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6500 Ltr. Motor5.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity6500 Ltr Vessel sizesDia. 2200x2000 mm Conical bottomcheck Flat top sidecheck ManholeDia. 500 mm Top connectionsDN50 (4x) OutletDN50 Max. temperature+50ºC With paddle stirrercheck Motor5,5kW, 400/690Volt, 1445rpm Speed mixing shaft52 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Mounted on legscheck Weight1100 kg Floorspace2,5x2,5 m Total height3,3 mStirring vesselsSTC EngineeringStirring vessels > Stirring vesselsBrand > STC Engineering What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...
used
General SKU305U615 LocationBarneveld MakeSTC Engineering GmbH TypeReaktor 6500LTR No.6004 Year of construction2005 Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information Total height3,7 m Weight2100 kg CEcheck Floorspace2,3x2,3 m ATEX compatiblecheckStainless Steel ReactorsSTC E ...
used
General SKU384T1155 LocationBarneveld MakeQuinn Engineers TypeV4408/C No.01-474-0026316 Year of construction1980 Pressure Working pressure0 Bar Working pressure jacket3.04 Bar Main Features MaterialStainless steel Volume1460 Ltr. Motor1.55 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity±1400 Ltr. Vessel sizesDia. 1300x1100 mm Dished bottomcheck Flat top sidecheck With covercheck Top connections45 mm, 35 mm (2x) Outlet45 mm Max. temperature93 °C. With paddle stirrercheck Motor1,55 kW, 415 Volt, 1400 rpm MaterialStainless steel 1.4401 (316) Information Mounted on legscheck Weight900 kg Floorspace1,4x1,4 m Total height2.4 m Extra Specificationsjacket connection diameter: 24 mm (2x) jacket capacity: ±190 Ltr. Stirring vesselsQuinn EngineersStirring vessels > Stirring vesselsBrand > Quinn Engineers What you can expect from Foeth ...
used
General SKU223S097 LocationBarneveld MakeK.F. Alliance Eng. Limited (UK) TypeSH No.8868 Year of construction2002 Main Features MaterialStainless steel Length2300 mm Width400 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder width400mm Feeder length2300mm Feeder height130mm Closedcheck Inletdia. 240mm (3x) dia. 200mm (1x) Outletdia. 240mm With motor1.5 kW 230/400 Volt Information Mounted on framecheck Total height1,8 M Weight1200 Kg CEcheck Floorspace3,1x0,8 MVibro feedersKF Alliance Engineering Ltd.Conveying systems > Vibro feedersBrand > KF Alliance Engineering Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...
used
Inv. Num. : 6597 Type: AS275 Producer: AOSIF ENGINEERING LTD Created: 2022 Parameters: Throughput speed: 1500 1/min Frequency: 50 Hz Voltage: 380 V Machine dimensions: 1578x778x1290 mm Weight: 2800 kg
used
Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass
used
Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,700 mm, weight approx.: 350 kg
used
Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...
used
Apple Engineering Ltd transport belt with s/s frame and plastic belt, belt width: 300 mm, serial number: SP1787B1291, total dimensions: 7700 mm x 600 mm x 800 mm.
used
Apple Engineering Ltd transport belt with s/s frame and plastic belt, belt width: 300 mm, serial number: SP1787A1291, total dimensions: 15000 mm x 700 mm x 810 mm.
used
A.E.W. Engineering bandsaw, model: 400, type: MK.11, serial number: LHS229791, 380 V, 4-7 A, dimensions: 1150 mm x 1000 mm x 1900 mm. Without saw blade.
used
A.E.W. Engineering bandsaw, model: 400, type: MK-11, serial number: LH-164 188, 415 V, 3 Ph, 6.2 A, dimensions table: 1040 mm x 900 mm, total dimensions: 1040 mm x 1070 mm x 1900 mm.
used
Description: • 3 Roller feeder for spindle moulder • Motor 0.75 KW • 2 feed speeds: 11 - 22 m/min Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 100 kg