engel 500 used for sale

Oil-free & Brushless Ring Saw - Rated power: 5000w - constant RPM: 1800 rpm - Voltage AC220V - Max cutting size: 39 cm - Blade Diameter: 500 mm - nw: 11.5 kg Auction-ID: A1-40324-86

new and unused charger in orig. for batteries with 300-500Ah capacity. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-2451

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3655

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug and 160A Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-50765-4851

Professional 3-cylinder piston compressor Brand: Stahlfest buffer tank: 500 liter buffer tank Airflow: 900 liters per minute Capacity: 14 bar / 200 psi Engine power: 10 hp Connection: 400 volts Drive: V-belt driven Included: spare gaskets, compressor oil and extra V-belts Manual: Manual included Condition: Unused Auction-ID: A3-46133-1220

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/sMyLTTNgSwY - Former Linde full-service device - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Windshield with windshield wiper - Roof pane - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-50765-82

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/K0tt0OWS4hw - Former Linde full-service device - Service valid until 05/2027 - UVV valid until 05/2027 - Battery: 0V 5PzS 625Ah, voltage measured at 82.6V in idle mode - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-50765-116

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/2czXIBFJlfE - Former Linde full-service device - Battery: 19/09/2018 80V 575AH, voltage at rest measured at 82.8V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; fork adjuster 60-193 cm with sideshift - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat - Attention: drives slowly Auction-ID: A1-50765-126

new and unused charger in orig. for batteries with 500-700Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-8010

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/WjPy7b2WMAQ - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: Year of construction 09/2023 48 V 500Ah , voltage measured at rest with 49.66V - Triplex mast with full free lift - 3rd valve, sideshift + forks new 10/2026 - Load protection grille (can be easily dismantled) - Semi-cab with windscreen with windscreen wiper - Side fall-out protection (very easy to dismantle) - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-50765-214

new and unused charger in orig. for batteries with 500-700Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-8011

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/AgRs-qQ27z0 - Former Linde full-service device - Next service due in 1000 operating hours - Battery: 02/2018 80V 775Ah, voltage measured at rest with 83.7V - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; fork adjuster with side shift - Semi-cab with windshield wipers - Semi-cab with windshield wipers - white non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-50765-85

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/pqAR83AgqUY - Former Linde full-service device - Next service due in 561 operating hours - UVV valid until 05/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Multiple fork adjuster + sideshift (simple fork adjuster possible on request) - Full cabin with radio, heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light on the side - Comfort seat with lumbar support and seat heating - LPG gas exchange bottle (quick to exchange, available everywhere) Auction-ID: A1-50765-177

Equipped with automatic transmission; central door locking; sliding tilting roof; alloy wheels (original); road tax free! Auction-ID: A1-47420-173

Self-propelled lawn mower, tracked, remote controlled 500m, suitable for rough terrain. Can be used on a slope of 70% drive electric, mow petrol Includes trickle charger. Electrically powered Direct solution in agricultural landscaping, in orchards, vineyards, slopes, embankments, farms, solar power plants, etc. Remote mowing is safe and efficient. Unused Auction-ID: A1-40324-110

Ifor Williams GD126GM machine transporter – 3,500 kg – ramp – 2003 Ifor Williams GD126GM twin-axle machine transporter, built in 2003, with a maximum total weight of 3,500 kg and a payload of 2,575 kg. Equipped with hardwood loading floor, large folding ramp and galvanized steel superstructure. Suitable for the transport of mini excavators, vibratory plates, aerial work platforms and other machines. Specifications: Brand: Ifor Williams Type: GD126GM Version: machine transporter Year of construction: 2003 Chassis number: SCK60000030385637 Number of axles: 2 Maximum total weight: 3,500 kg Tare weight: 925 kg Payload: 2,575 kg Maximum axle load: 1,750 kg per axle Cargo space: approx. 3.67 x 1.70 m Suspension: leaf spring Braking system: drum brakes Floor: Hardwood Tyre size: 185/60 R20 Tyre profile 1st axle left: approx. 7 mm Tyre profile 1st axle right: approx ...

Linde H25T-03 LPG forklift – 2,500 kg – 5,697 hours – 1999 Specifications: Brand: Linde Type: H25T-03 Series: 351-03 Year of construction: 1999 Serial Number: H2X351K03862 Hours: 5,697 hours, read Fuel: LPG Lifting capacity: 2,500 kg Load center of gravity: 500 mm Own weight: 4,500 kg according to type plate Transmission: Linde hydrostatic Spoon length: approx. 1,000 mm Total length: approx. 3,500 mm Total width: approx. 1,350 mm Total height: approx. 2,350 mm Tires: full rubber / super elastic Features: Duplex Lifting Mast Hydraulic mast inclination Closed cab Cabin doors Front and rear window Windshield wiper Linde hydrostatic drive Solid rubber tires front and rear Spoons of approx. 1,000 mm LPG installation LPG tank included CE marking Particularities: Hour reading read from the hour meter. Auction-ID: A1-47393-190

Complete Victron Energy 3-phase ESS home battery and energy storage system with 64kWh LFP (LiFePO4) and 3x Victron MultiPlus-II 5000. Suitable for residential and business applications and can be integrated with an existing or new solar panel/PV installation. System configuration: • 64kWh LFP battery storage • 3x Victron MultiPlus-II 5000 • Inverter power: 15 kVA total / approx. 12 kW continuous at 25 C • 3-phase Victron ESS • Suitable for integration with solar panels / solar PV • Battery Management System (BMS) • Professional pre-assembled system • Year of construction: 2026 Applications: Home battery and business energy storage, solar energy storage, increase in self-consumption/self-consumption, peak shaving, load shifting, dynamic energy tariffs and - with a suitable system configuration - emergency power/backup. Victron Energy ESS combines battery storage, invert ...

Z&B Starline 500 CNC Profile Surface Grinding Machine Manufacturer: Z&B Model: Starline 500 Year: 2000 Machine type: CNC Profile Surface Grinding Machine CNC profile surface grinding machine equipped with Siemens 840 CNC control. The machine has been generally overhauled and is reported to be in very good condition. Currently under power. Technical specifications: CNC control: Siemens 840 Magnetic clamping surface: 500 × 200 mm Grinding wheel accessories: Approx. 30 flange holders for grinding wheels Operating status: Under power Approx. dimensions (L × W × H): 2,500 × 1,800 × 2,000 mm Approx. weight: 2,500 kg Condition: Used, generally overhauled, very good condition. All descriptions, technical specifications, dimensions, weights and other information are indicative only. Auction-ID: A7-50842-1

JCB TLT 35-26D 4WD IndustryPro Telescopic Forklift – 3,500 kg – 2022 Specifications: Brand: JCB Model: TLT 35-26D Type: 35-26D-4WD Version: IndustryPro Year of construction: 2022 Model year: 2022 Chassis number: JCBTD031KN3125663 Operating hours: 2,330.5 hours, read Engine: Kohler KDI 2504, 4-cylinder diesel Displacement: 2,504 cm³ Engine output: 46 kW / approx. 63 hp at 2,600 rpm Drive: 4WD Transmission: hydrostatic Operating weight: 6,000 kg according to type plate Maximum lifting capacity: 3,500 kg Maximum lifting height: approx. 4,350 mm Maximum forward reach: approx. 2,390 mm Width: approx. 1,410 mm Height: approx. 2,320 mm Wheelbase: approx. 2,060 mm Features: Telescopic Extendable Boom 4-wheel drive Hydrostatic drive Enclosed safety cabin Ergonomic driver's seat Suspension driver's seat with armrests Joystick control Digital Multifunction ...

# Groenewegen 1-axle curtain-sided semi-trailer – ex NL army – 1978 – 10,500 kg load capacity Robustly designed Groenewegen 1-axle semi-trailer, built in 1978, from the Dutch army. Equipped with a canopy body, fixed roof, aluminum side boards and hardwood cargo floor. Equipped with BPW axle, leaf spring suspension and drum brakes. Original Groenewegen factory plate available. Specifications: Brand Groenewegen Type according to type plate presumably DPO 7-9 Year of construction 1978 Chassis number 7818 Version 1-axle curtain-sided semi-trailer Origin ex Dutch army Load capacity according to type plate 10,500 kg Number of axles 1 Axle mark BPW Suspension leaf spring Drum brake system Floor hardwood Aluminum side boards Fixed roof Tarpaulin Tire size 10 R 22.5 Tyre tread left approx. 10 mm Tyre tread right approx. 9 mm Dimensions of cargo space: Length appro ...

Pressing line consisting of: CATTANEO PRM 320-500-3000 mechanical press from 1976, SARONNI 600 coil unwinder from 1958, driver Auction-ID: A7-50851-5

Thanks to the Swedish quality design, this table guarantees a stable and safe vertical positioning of your goods - Brand: Marco AB (VPG), Type: M1 005090-D1, Year of construction: June 2020, Lifting capacity: 500 kg (maximum distributed load), Lifting height (Stroke): 900 mm, Platform dimensions: 1350 x 800 mm, Construction height (Lowest position): Only 180 mm, Lifting time: Approx. 20 seconds, Connection: 3x400V AC (Power current), Protection class: IP55 (dust and splash water resistant), Operation: Includes ergonomic hand control with emergency stop, Standard: Fully CE certified. (Functional) Auction-ID: A3-46133-10851

Equipped with cruise control, air conditioning, parking heater, leather upholstery, heated seats, electric seats, This is a limited edition, edition of 500! Auction-ID: A1-47420-6

7x new gasoline power generators Erdmann ER9500 & Bauer G-3000-1 – 2,300/2,500 W Batch consisting of 7 new old petrol power generators: 4x Erdmann ER9500 and 3x Bauer G-3000-1. Specifications: Erdmann ER9500: Quantity: 4 pieces Brand: Erdmann Tools / Huahz Type: ER9500 Engine: 4-stroke petrol engine Engine power: 6.5 hp Rated voltage: AC 230/400 V, 3P/N/PE Frequency: 50 Hz Rated power: 2,500 W Maximum power: 2,700 W Noise level: 96 dB(A), according to rating plate Weight: 39 kg each, according to nameplate Year of manufacture: 2022 on nameplate Bauer G-3000-1: Quantity: 3 pieces Brand: Bauer Type: G-3000-1 Engine: 4-stroke petrol engine Engine power: 7 hp Power: 2,300 W Voltage: 230 V Fuel tank: approx. 15 litres Features: Erdmann ER9500: 3x 230 V socket 1x 400 V CEE socket Voltmeter Circuit breaker / protection 12 V DC charging socket CE m ...

unused in transport crate; 3824 Auction-ID: A1-50865-1707

Max. input voltage: 145 VDC MPPT voltage range: 60 - 115 VDC Rated output apparent power: 5000 VA Ingress protection: IP20 Weight: 11.4 kg Type: Off-grid Inverter (PV Off-grid Inverter) Rated Power: 5000 W Number of input strings: 1 Max. charging current (solar charger): 80 A AC input: 230 VAC, 50/60 Hz, 40 A, 1-phase Max. AC charging current: 60 A AC Output: 230 VAC, 50/60 Hz, 22 A, 1-Phase Battery input: 48 VDC, 117 A Battery Type: Lead-Acid / Lithium Working temperature: 0 to +55 °C Max. altitude: < 2000 m Protection class: I Display: LCD + LED Connections: BMS, RS485, USB, parallel connection, potential-free contact Article number: SKSL00.0011900 Country of origin: China Included: manual, communication cable and connection cables Auction-ID: A1-46380-827

Control: Grundig Numerik NC Pilot Table dimensions: 800x360 mm The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-3

unused in transport crate; 3824 Auction-ID: A1-50865-1708

Content: 0.5 cbm Net weight: 117 kg Load capacity: 1000 kg Stackable: 4-fold Auction-ID: A7-50868-25

Allimex cable clamp Allin 5 boxes with 1000 pieces Total: 5000x bolt + 5000x knurled nut M8 Stainless steel Auction-ID: A1-46380-92

Allimex cable clamp Allin 5 boxes with 1000 pieces Total: 5000x bolt + 5000x knurled nut M8 Stainless steel Auction-ID: A1-46379-473

PLASMATREAT FG 5001 – Industrial Plasma Generator PLASMATREAT FG 5001 industrial plasma generator, designed for surface treatment applications using Openair-Plasma technology. This equipment is intended for cleaning, activation and surface preparation operations in order to improve their adhesion before various industrial processes. Its compact design makes it easy to integrate into a production line or an automated installation. Features: Brand: PLASMATREAT Model: FG 5001 Type: Industrial Plasma Generator Technology: Openair-Plasma Applications: cleaning, activation and surface treatment Use: industrial and professional Dimensions (L x W x H): 60 x 80 x 35 cm Weight: 55 kg Equipment sold as is. Auction-ID: A1-50714-4062

CNC control: MSX-850 III Number of axes: 2 Strokes: X = 260 mm, Z = 590 mm Spindle speed: 50 – 5000 rpm Power: 15 kW Bar capacity: Ø 65 mm Spindle bore: 73 mm Turret : 12 stations (BMT) Max turning diameter: 356 mm Max turning length: 510 mm Chip conveyor: yes 235L high-pressure pump: yes Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4004

- FIAC NS15-20 compressed air dryer (integrated): power 0.642 KW, refrigerant R134A. - CSC 5H500 compressed air tank: capacity 500 liters. - Operating conditions of this machine: unchecked. - Dimensions for transport: 2100 x 1200 x 1600 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-10

- Dimensions approx. 900 x 900 x 2000 mm. - Approximate weight 250 kg. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-37

- FIAC NS15-20 compressed air dryer (integrated): power 0.642 KW, refrigerant R513A. - Compressed air tank: capacity 500 liters. - Operating conditions of this machine: unchecked. - Dimensions for transport: 2000 x 1200 x 1750 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-47

- Usable working area approx. 5000 x 1400 mm. - Axis C. - Tool magazine with 18 positions. - Electrospindle: power 7.50 KW, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 11. - Vertical holes in the y-axis direction: 11. - Horizontal holes in the x-axis direction: 1 + 1. - Horizontal holes in the y-axis direction: 1 + 1. - Edging unit with edge loader for 2 coils. - IMA numerical control. - 8 benches. - Lifting modules for heavy parts. - SIEMENS 2BL1100-2NC00-1S-Z vacuum pump, 2.35 KW motor. - Tools (10) and add-ons (3) that appear in the photographs are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-18

Voltage converters are designed to transform direct current from batteries with a voltage of 12 V into alternating current with a voltage of 230 V. The device is equipped with a USB socket to power and charge mobile devices. Auction-ID: A7-50796-498

0-500 mm vernier depth gauge for metrology, dimensional control, CNC machining, general mechanics, industrial maintenance and quality control. This instrument enables the precise measurement of large depths, bores, grooves and technical housings on mechanical parts. Suitable for mechanical workshops, industrial companies, quality departments, technical schools and metrology laboratories. Auction-ID: A1-50541-1020

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50796-302

Interior vernier caliber for metrology, dimensional control, general mechanics, industrial maintenance and precision machining operations. This instrument allows the measurement of internal diameters, bores, technical housings and large openings with direct reading on vernier. Suitable for mechanical workshops, quality departments, machine manufacturers and industrial companies looking for robust and reliable measuring instruments. Auction-ID: A1-50541-1026

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50796-402

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50799-492

TESA outdoor micrometer for metrology, dimensional control, precision mechanics, CNC machining, toolmaking and quality control operations. This professional instrument allows the precise measurement of external diameters, thicknesses and dimensions of mechanical parts. TESA's Swiss-made quality makes it a sought-after equipment for mechanical workshops, quality departments and industrial companies. Auction-ID: A1-50541-1044

Voltage converters are designed to transform direct current from batteries with a voltage of 12 V into alternating current with a voltage of 230 V. The device is equipped with a USB socket to power and charge mobile devices. Auction-ID: A7-50796-308

Voltage converters are designed to transform direct current from batteries with a voltage of 12 V into alternating current with a voltage of 230 V. The device is equipped with a USB socket to power and charge mobile devices. Auction-ID: A7-50799-498

Voltage converters are designed to transform direct current from batteries with a voltage of 12 V into alternating current with a voltage of 230 V. The device is equipped with a USB socket to power and charge mobile devices. Auction-ID: A7-50796-408

Voltage converters are designed to transform direct current from batteries with a voltage of 12 V into alternating current with a voltage of 230 V. The device is equipped with a USB socket to power and charge mobile devices. Auction-ID: A7-50799-308

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50799-302