engel 500 used for sale

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

VERTICAL MIXER, 5.000 lt.capacity Total height approx 5.000 mm Max diam. 1,850 mm. Constructed in painted electro- welded carbon steel. Inner auger diam.280 mm. Loading hopper with safety grid and sampling shutter, 600 x 500 mm. Pulley and belt transmission, protected by carters Inspection door with safety limits, Cleaning hinged door on bottom of cone for complete discharging, with safety opening Side discharging pipe to big bag with valve at 1.000 mm from ground Bottom discharging pipe propeller type max level indicator automatic greasing kit 7,5 kw electric motor Complete with control panel. Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V CE compliance and instruction manual, installed power - used power in work: about 60-65% : 7.5, capacity: 5.000 lt.

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

Centrifugal pump FRISTAM Capacity: 2,500 l/h Flow rate: 2,500 l/h Operating pressure test 2.3 bar Motor: 2.2 kW Connections: suction side and discharge side: DN 80 - With chassis mobile with 2 swivel and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 850 mm Width: 500 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost.

Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Schaltgr. Dyn 5 Code: 9129 IP:23 Primary: 500 V 12A Secondary: 399/231 V 380/220V 361/209V 15.15A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg More items - new and used - can be found in our shop! International shipping costs on request!

Consisting of 8 air cushions 69 x 69 cm Control panel 9 Hoses The system has only been used a few times and is in mint condition.

Complete line for carbonated soft drinks and carbonated mineral water capacity: 5.300 bph by 500 ml PET bottles neck size: PCO1881 working hours: approx. 28,000 hrs. consisting of: 1. Kosme KSB 4R PET stretch blow moulding machine year of manufacturing 2018 includes: preform hopper/elevator, preform unscrambler and ATS mould chiller. 2. Air conveyor 3. Caronation Techniques E0526 mixer year of manufacturing 2016 4. Filler Kosme Barifill with 16 filling heads year of manufacturing: 2017 with AVE capper year of manufacturing 1999 5. Heuft Basic inspection unit 6. Kosme labeller year of manufacturing 2018 7. Conveyors (mixed) 8. SMI LSK 30T shrink packer and tunnel packing format: 3x2 year of manufacturing 2005 9. Videojet 1530 date coder 10. Logopak case labeller year of manufacturing 2012 11. Robopac Roto ...

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T

Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitter for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK

Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250  ...

Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T, availability: about 8 weeks time from confirmation

Guillotine, reel slitters for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK

Diagonal Fan, 230V, D350mm, 5000m³/h, EDR 36-0080.0658, MAICO, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, have never been used and are completely new. Diagonal fan, 230V, 960 watt, D350mm, 5000m³/h, Type EDR 36-0080.0658, MAICO, new Overall length 397mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and cour ...

Column-mounted jib crane, Vetter, 1,500kg, 6m boom, 6m high – unused - : Price from location: only 13.950.-€ (net)! Manufacturer: Vetter Type Master M Year of Make: 2022 Load capacity P: 1500kg M15-6.0 Column-mounted jib crane designed in accordance with the EC Machinery Directive, EN 13001 and VDE regulations, for outdoor use 4 Beaufort (20 – 28 km/h; moderate breeze). Identification number: 50010400 EN 13001 HC2 S3 HD2 Swivel range SB: 360° ∞ Max. permissible Hoist weight Gk 180kg Max. permissible Hoist speed VH 16m/min Projection A 6000mm Bottom edge boom UK 6000mm Overall height B 6470mm Bolt circle diameter DL 630mm Flange Outer Diameter DF 710mm Beam flange width F 180mm Approach dimension Aa 250mm Approach dimension Ai 915mm Pressure Column Length B1 1540mm max. vertical force Vk max. 32kN max. moment Mk max. 11575kNcm Weight 1756kg Operating ...

Manufacturer: Siemens Model: SGT 500 Year: 2007 Condition: New Wattage: 18,47 MW Hours: Zero Frequency: 50/60 Hz Fuel Type: Dual – Gas & Liquid New turbines from a canceled project (2007). covered by an 18-month Siemens warranty from the date of purchase.

Spur gear pulley, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, hand trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley, under-flange trolley -Load capacity: 5000 kg -Hub travel: 4.0 m -Dimensions: 500/400/H800 mm -Weight: 165 kg

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table -Load capacity: 500 kg -Platform: 1260 x 915 mm -Dimension retracted: 500 mm -Dimension extended: 1115 mm -Max. Stroke: 615mm -Quantity: 1 piece available -Transport dimensions: 1420/915/H870 mm -Town weight: 274 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -with electric driving unit via: frequency converter -Load capacity: 500 kg -Platform: 1500 x 800 mm -Dimension retracted: 310 mm -Dimension extended: 1000 mm -Max. Stroke: 690mm -Transport dimensions: 1500/800/H310 mm -Own weight: 234 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: FAG, hydraulic pump, hand pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Price: per piece -Dimensions: 660/170/H200 mm -Weight: 6.8 kg/pc.

Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 500mm -Length: 11900 mm -Thickness: mm -Quantity: 1 piece available -Transport dimensions: 500/270/H230 mm -Weight: 11.3kg

Pneumatic chain hoist, crane, indoor crane, assembly crane, air-operated chain hoist, compressed air chain hoist, compressed air chain hoist, pneumatic chain hoist -Manufacturer: BroomWade, pneumatic chain hoist type MLHI10A -Load capacity: 500 kg -Chain length: 3100 mm -Dimensions: see photos -Transport dimensions: 260/230/H300 mm -Weight: 18 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable winch -Cable winch: Load capacity 0.5 t -Hook path: 12.0 m -Dimensions: see photos / technical drawing -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm -Weight: 142 kg

Container, grit trap, storage container, transport storage container, storage tank, transport container -Container: Storage container -Capacity: 5047 liters -Inner dimensions: Ø 1890 x 1800 mm -Connections: see photos -Number: 2x containers available -Price: per piece -Dimensions total:Ø 1930 x 1815 mm -Weight: 211 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, two-stage pump -Manufacturer: Lukas, hydraulic pump hand pump two-stage pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H210 mm -Weight: 10.5 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: FAG, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H195 mm -Weight: 8.9 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump -Type: ZPH 2A/5 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 900/300/H200 mm -Weight: 15 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Dimension when retracted: 450 mm -Extended dimension: 600 mm -Attention: Stroke only: max. 150 mm -without control -Number: 7x lifting tables available Price: per piece -Empty weight: 700 kg/piece

Intensive batch mixer with a usable filling per batch of 500 l. / 800 kg (max.), emptying via central bottom flap (hydraulically operated), tools: star whirler, mixing star with two blades and wall-to-bottom scraper. Agitator drive: 45.0 kW via V-belt (speed can be controlled via FU), drum and mixing star drive: 13.5 kW, hydraulic unit: 2.2 kW for lock actuation. Includes modern control cabinet with programmable control. Mixer completely overhauled in 2016. Available for an extra charge: Comfortable mixer platform / steel substructure incl. drawings and statics.

Set of 12 E2 weights from 1 g to 500 g - ZWIEBEL New equipment in its original packaging Type: COFRAC weight series Class: Class E2 Weight: 1g / 2g / 5g / 10g / 20g / 50g / 100g / 200g / 500g Weight Material: Cobalt Alloy / Stainless Steel With wooden box

F20 JBA WATER STORAGE TANK Capacity: 5000L Material: Fiber Height: ~ 2.2 meter (Approx. 7 feet) Dealing Terms: Buyer to Arrange Transport: Due to its massive 5,000L size, the buyer will need to arrange a suitable lorry and manpower for dismantling (if necessary) and self-collection/loading. Location: F20 TGSB, Meru, Klang.

GEA Sour Cream Thermization Line, Capacity: 1,500–2,000 l/h, Year: 2013, Installed & Connected – Excellent Overall Condition, Complete GEA Process Line, We are offering a complete GEA Sour Cream Thermization Line originally designed for the, thermal treatment of sour cream and fermented cream products., The line was installed in 2013 and remains installed and connected on site. It is available for, inspection and can be offered complete with associated process equipment, automation,, and technical documentation., The system was supplied as a complete GEA process line and includes a buffer tank,, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and, fully automated process control., Main Application, Originally designed for:, • Sour Cream, • Fermented Cream (25% fat), Potential Applications, • Kefir, • Cultured Buttermilk, • Drinkin ...

Used filling machine TBA21 500 Prisma 8000 bph The Used filling machine TBA21 500 Prisma 8000 bph provides a high-efficiency solution for industrial aseptic filling. Tetra Pak specifically designed this machine to package dairy products and fruit juices in Prisma Brik containers of 0.50 L. As a result, it ensures a reliable and consistent filling process. Technical features of the Used filling machine TBA21 500 Prisma 8000 bph The TBA21 model, built in 2003, undergoes a complete refurbishment before delivery. Consequently, this process restores its original functionality and ensures compliance with current safety standards. The machine currently remains in storage; however, it is ready for installation. Aseptic filling system This machine uses aseptic technology to protect the product throughout the bottling process. More importantly, it preserves the microbiological integrity of the liq ...

Used filling triblock for vinegar Fimer 1998 - 5000 BPHTechnical Specifications & Performance DataThis second hand triblock Rinsing-Filling-Capping Monoblock delivers reliable performance for glass bottling applications. Manufactured by Fimer with proven engineering quality, the SRT 24-24-6 configuration integrates a 24-clamp rinser, a 24-valve filler, and a 6-head capper into a compact, efficient platform suitable for industrial packaging and beverage production. It is a strong option for upgrading an existing used bottling line or expanding a production cell with robust, easy-to-service equipment.Manufacturer: FimerModel: SRT 24-24-6Year: 1998Configuration: 24-24-6 triblock (rinser-filler-capper)Production speed: up to 5,000 bphContainers: Glass bottlesRinser: 24 grippers with mobile nozzleFiller: 24 valves, gravity/light depression technologyCapper: 6 heads for aluminum screw capsCap  ...

Used Automatic 18.9L bottling line 500 BPHTechnical Specifications & Performance DataThis automatic bottling line is engineered specifically for large 18.9L bottles, delivering dependable performance for washing, disinfecting, filling, and capping. Designed as a complete, synchronized system, it provides consistent throughput and accurate operations across all stages.Production speed: 500 bottles per hourTotal output: 9450 liters per hourBottle format: 18.9LProcess stations: Washing, disinfecting, filling, cappingFilling heads: 6Operation: Fully automatic lineApplication: Ideal for high-volume, large-format bottle handlingAdvanced Automation & Control SystemsThe line operates with automated sequencing across each station to maintain stable throughput and reduce operator intervention. Controls support straightforward start/stop and changeover procedures to keep change times minimal and ma ...

Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Isobaric valve: No PLC type: Not Existing Spare parts available: No Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4)  ...

Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatt ...

Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 5000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for Glass containers, particularly in 1.5L formats.Manufacturer: TMG Model:VEGA 60 Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrier Interlayermanagement: Tier-sheet magazine with automatic i ...