engel 500 used for sale

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : Dm. 200x78x78 mm : 2800 1/min : 300 mm : 300x150x55 mm : 350x150 mm : 500x160 mm : 3.6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain t ...

: neu : 2026 : 070236 : September 2026, Zwischenv : Türkei : 6900 € : 133.17 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal cutter, Make Konrad Ströbel, Model 500, Year 1970, Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree sharp corner. (Dovrie), New ball bearings for the electric motor, New overload protection main switch, Available direct, Knives included: the machine comes with a index cutting tool made of high quality metal and hardened shafts, 90 degree sharp corner. (Dovrie), Voltge:: 380 volts

Hugo Beck Flexo 500 S – Shrink Wrapping Machine, Machine details:, - Model: Flexo 500 S, - Manufacturer: Hugo Beck, - Year of manufacture: 04/2006, - Power supply: 400 V / 50 Hz, - Power rating: 3 kW, - Rated current: 5 A, Description:, Robust and reliable shrink wrapping machine from the well-known German manufacturer Hugo Beck. This Flexo 500 S, built in April 2006, is in good and working condition. Ready for immediate use in production environments and suitable for a wide variety of packaging applications., Machine can be viewed in operation by appointment

Gluing machine, Make Essor, Model 500, Year 1980´s, Working size 500 mm, Glue cold PVA glue, Substrates for both sheets and board, Details the displayed refurbished machine is an example, I5542423 we can deliver up to 2 identical machines, Working size: 500 mm, Glue: cold PVA glue, Substrates: for both sheets and board

A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.

A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.

table diameter: 500 mm table load: ? t table height: hor. 235 / Sph. vert. mm groove width: 18 mm total power requirement: - kW weight of the machine ca.: 0,270 t dimensions of the machine ca.: 800640235 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Total weight, approx.: 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size L ...

pressure: 70.0 t punching cross-cut in cmm: 27 in 20 mm punching cross-cut in cmm: 32 in 14 mm work height max.: 1060 mm column arm: 500 mm weight of the machine ca.: 1500 kg. total power requirement: 7.0 kW range L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 53250 € : 1006.43 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 MK : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60-1/4 Gänge/ : 0.125 - 30 : 240-1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3100 mm : 1250 mm : 1400 mm : 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS:  ...

roll diameter: 500 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 110 kW Condition: used, overhauled Specification: Rolling mill 500 x 1500 mm - second-hand - roller diameter: 500 mm - roll length: 1500 mm - monoblock motor under the rollers - Fixed friction between the rollers - Rollers: with core bore, with central chamber for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - Tilting material guide jaws made of steel with mechanical with mechanical safety interlock - Rollers: mounted on bronze bushes with circulating oil lubrication via pump - New Johnson-Fluiten ball swivel joints for connection to water circuit to water circuit - New safety brake for EMERGENCY STOP - New AC motor: 90 kW - 400 V - 50 Hz - New trough for holding th ...

pressure: 6 bar table diameter: / mm table load: / t Pneumatic drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm Control: Siemens 840 D feeds - fine adjustment: 1-8000 mm/min table-size: 2120 x 500 mm table load capacity: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle turning speed - stepless: 0-15000 U/min spindle motor: 20 kW spindle bearing diameter: 70 mm tool diameter: 63 /126 mm tool magazin:: 40 Stk weight: 12 t total power requirement: 65 kVA weight of the machine ca.: t dimensions of the machine ca.: m X-axis travel: 2,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Control system: Siemens 840 D Feed rate (fine adjustment): 1 – 8,000 mm/min Table size: 2,120 × 500 mm Table load capacity: 2,000 kg Rapid traverse (X-axis): 40 m/min Rapid traverse (Z-axis): 20 m/min Tool holder: HSK-A63 Spindle speed range (infinitely variable): 0 – 15,000 rpm Spindle drive: 20 kW Spindle bearing  ...

grinding depth: 500 mm internal diameter: 20... 400 mm work piece spindle speed: 40400 U/min table speeds: 0,18 m/min rapid traverse: 10 m/min total power requirement: 17 kW weight of the machine ca.: 6,5 t grinding diameter: innen / internal 20..400 mm / external 500 mm max. diameter of work piece: 500 mm max. grinding length: 315 mm cone grinding: 60 ° power drive of internal grinding motor: 7,5 kW rev’s of internal grinding spindle: 2640...16500 U/min power drive of face grinding attachment: 4 kW power drive of workpiece motor: 1,5 kW rev’s of work piece spindle: 40...400 U/min steplessly variable table traverse speeds: 0,1...8 m / min rapid movement of table: 10 m / min stroke table 630 mm max. distance between work piece spindle flange and grinding spindle: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Tomato Paste Line Mfc.: ELPO SpA Built: 2004 – Never in operation Nominal capacity: 500 T of tomatos/day Paste: 30 T/day of concentrated tomato paste Scope of supply: Tower Assembly, Flat Beam Structure, and Electrical Control Panels Tomato Processing Line (Hot Break Process) Filling Machine (Dispenser) Electrical Control Panel Water Filtration System CIP (Clean-in-Place) System Evaporator and Boiler

Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Technical data: Centre-to-centre distance: 1,300 mm Centre height: 250 mm Motor: 1.4 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

The machine is in good technical condition; it can be tested by prior arrangement.

pressure: 500 t distance between columns: 1220 mm max. ram stroke: 600 mm distance table/ram, max. stroke up, adjustment up: 1000 mm table surface area: 1600 x 1200 mm die-cushion pressure inside the table: 320 t stroke of drawing cushion in table: 150 mm drawing cushion surface in table: 750 x 812 mm die-cushion pressure in pusher: 180 t stroke of drawing cushion in pusher: 100 mm drawing cushion surface in pusher: 750 x 625 mm ram surface: 1600 x 1200 mm table height over floor: 800 mm feed down: 665 mm/sec feed up: 530 mm/sec working feed: 34 - 100 mm/sec quantity of oil: 2000 l power capacity: 180 kW weight: 40 t dimensions of the machine ca.: 3,2 x 2,4 x 7,5 m by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machin ...

Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm Accessories: -Setup cassettes -Table with ball rollers Youtube video link: https://www.youtube.com/watch?v=1RlPrkZPN0Y&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 220 kN plate thickness: 8 mm sheet width: 3000 mm plate length: 1500 mm workpiece weight: 200 kg total power requirement: 9,5 kW dimensions of the machine ca.: 7395 x 6540 x 2072 mm Features: Punching head: - Hydraulic single-tool holder with 360° rotation - Manually adjustable holding force - Programmable holding mechanism (active/passive/re-tightening) - Spray lubrication for punch - Punch stroke counter - Level monitoring for thread forming and tool lubrication Control System: - Open control system based on Sinumerik 840 D - 12 TFT color display - Teleservice via the Internet - Automatic shutdown Data Transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual-beam photoelectric sensors - Hydraulic emergency shutdown - Warpage detection Programming: - TruTrops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread formi ...

table diameter: 715 mm table load: 500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-110 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 675 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate length: 1250 mm plate thickness: 8 mm Punching capacity: 220 kN Number of working hours: 51.658 h total power requirement: kW weight of the machine ca.: 11.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 710 mm table width: 430 mm table load: 0,2 t surface area: 430 x 710 mm no. of flutes: 5 groove width: 14 mm weight of the machine ca.: 250 t dimensions of the machine ca.: 800600700 m No. 5304 Universal table DECKEL 2038 - 500 / FP 3 + 4 Rotation range 360 Tilting range from/to machine 45/15° Swivelling range right/left +/- 45 Transport dimensions approx. 800 x 600 x 700 mm Weight approx. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm digital readout: AKTIV - Digitalanzeige turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - Pos. 1: Legend 500 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controlle ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. control: Powercom Weinig Powermat 500 (Window Version for window producers) -------------------------------------------------------- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ---------------- ...

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw -------------------------------------------------- ----------- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z ...

table diameter: 690 mm table load: 500 kg swivelling range: 0 - 90 Grad table load: horizontal 500 Kg table load: vertikal 250 Kg boring diameter: 100 mm table turning speeds: 0,2 - 1,9 U/min total power requirement: 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in  ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to : 500 mm : 5.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 5000 mm : 3000 mm : 32000 kg : horizontal verschiebbar : 2550 mm : 1.700 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

HAUSER 500 ist ein Rundtisch, der Präzision, hohe Genauigkeit und Zuverlässigkeit bietet. Waagrecht, Durchmesser 500 mm, Max. Werkstückgewicht auf dem Tisch 100 kg. Hauptdaten: Abmessungen Länge 900 mm, Breite 800 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

MAHO MH 500 W ist eine Universalfräsmaschine für präzise Bearbeitungen mit hoher Genauigkeit und Zuverlässigkeit. Tisch 800×360 mm (5 T-Nuten 14 mm, Abstand 65 mm); Verfahrwege X500/Y300/Z400 mm; max. Werkstücklast 250 kg; Rundtisch Ø250 mm. Spindel ISO40, stufenlos 63–4000 t/min; Vorschübe 1–3000 mm/min (X/Y/Z); Eilgang 5 m/min; 3×380 V 50 Hz; 5 CV; Gewicht ~1700 kg; Maße 1700×1300×1800 mm. Zubehör: Rundtisch, Bohr-/Fräskopf, Lampe. Erreicht enge Toleranzen; Einsatz: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : 350 mm : 300 mm : 500x160 mm : 350x150 mm : 300x150x55 mm : 2800 1/min : 3,6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg : Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to m ...

STARRAG ZS 500-130 ist ein 5-Achsen-Bearbeitungszentrum, ausgelegt für hochpräzise, genauigkeits- und zuverlässigkeitskritische Bearbeitungen. Verfahrwege X 800 mm, Y 750 mm, Z 620 mm; Tischbelastung 800 kg; Werkstück Ø 500 mm, Höhe 550 mm; A-Achse 145° (+35/-110°); Teilung B 0,001°; Tisch 30 t/min; 4 Staflex-Paletten 500×500 mm, Tragf. 200 kg. Spindel HSK-A100 STEP TEC bis 12.000 rpm, max. Drehmoment 250 Nm, Spindelmotor 40 kW; Eilgang 40 m/min; Werkzeugwechsler 60 Plätze; Werkzeug Ø max 120 mm (200 mm bei freien Plätzen), Länge 400 mm, Gewicht 15 kg. Strom 3x400V 50Hz; install. Leistung 120 kW; Maschinengewicht ~22.000 kg; Abmess. 8000×5000×4000 mm. Zubehör: Satz Werkzeughalter, Werkzeugbruchkontrolle, Palettenwechseleinrichtung, rotierendes Sichtfenster. Ermöglicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Werkzeugbau. Te ...

GLEASON PFAUTER PSA 500 ist eine CNC Wälzstossmaschine, ausgelegt auf hohe Präzision, große Genauigkeit und Zuverlässigkeit. Kapazitäten: Modul bis 8; Schrägungswinkel +/-45°; größter Raddurchmesser 500 mm; Radbreite 200 mm; Tischbelastung 1000 kg. Technische Daten: Aufnahmekegel HSK B80; Stösselhub max. 225 mm; stufenlos 90–900 c/min; Anschluss 50 Hz 3x210 V; Gesamtleistung 55 kVA; Maschinengewicht ~13000 kg; Abmessungen L4460×B5490×H3260 mm. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

STEFOR RTA 500 ist eine Flachschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsmaße: Tischlänge 660 mm, Tischbreite 205 mm, Schleiflänge 500 mm, Schleifbreite 200 mm, Abstand Tisch–Spindelmitte 425 mm, Längsweg (X) 550 mm, Querweg (Y) 200 mm. Technische Daten: automatischer Quervorschub stufenlos 1–30 m/min, Tischgeschwindigkeit stufenlos 1–22 m/min, Schleifscheibe Ø225×30 mm bis 2800 t/min, Anschluss 3×380 V 50 Hz, Schleifspindelmotor 2 CV, Gesamtleistung 3 CV, Gewicht ~850 kg, Abmessungen 1900×1200×1800 mm. Zubehör: Magnetplatte 500×250 mm, Abrichtvorrichtung, Spritzschutz. Erreicht enge Toleranzen; typische Anwendungen: Automotive, Werkzeugbau, Luftfahrt, Medizintechnik, Uhrmacherei. Technische Daten ohne Gewähr

SUNNEN ML 5000 ist eine Honmaschine von hoher Präzision, entwickelt für große Genauigkeit und Zuverlässigkeit. Kapazität: Durchmesser 2–165 mm; Hublänge 6–170 mm; Spindeldrehzahl stufenlos 200–3000 t/min; Hubgeschwindigkeit 60–500 c/min. Technische Daten: Spindelmotor 4,1 kW; Anschluss 3x 400 V 50 Hz; Druckluft 5,5 bar; Gewicht ~725 kg; Maße L1600×B1200×H1900 mm. Erreicht enge Toleranzen; typische Anwendungen: Automotive, Luftfahrt, Medizintechnik, Maschinenbau, Feinmechanik. Technische Daten ohne Gewähr

SUNNEN ML 5000 ist eine Honmaschine hoher Präzision, genau und zuverlässig. Kapazität Ø 2–165 mm; Hublänge 6–170 mm; 60–500 c/min. Drehzahl 200–3000 t/min; Motor 4,1 kW; 3x400 V 50 Hz; Luft 5,5 bar; Gewicht ~725 kg. Für enge Toleranzen; Bereiche: Automotive, Luftfahrt, Medizintechnik, Werkzeugbau, Uhren. Technische Daten ohne Gewähr

PETER WOLTERS AC 500 ist eine Läpp- / Feinschleifmaschine, ausgelegt für hohe Präzision, große Genauigkeit und Zuverlässigkeit. Ausführung: zwei Scheiben, Scheibendurchmesser max. 440 mm. Drehzahlen obere Scheibe: 2 Stufen 56–113 t/min; untere Scheibe: 2 Stufen 50–100 t/min; Werkstückantrieb: 3 Stufen 20–65 t/min. Belastung obere Scheibe bis 250 kg. Anschluss 50 Hz 3x 380 V; Druckluft 5 bar; Hauptmotor 1,0/1,4 kW; Werkstückantrieb 0,5/0,9 kW; Gewicht ca. 800 kg; Abmessungen L1700×B1250×H1750 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

TRIPET MHPE 500 ist eine Flachschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 600x200 mm, Schleiflänge 500 mm, Schleifbreite 200 mm, Schleifhöhe 300 mm; Längsweg 530 mm, Querweg 220 mm. Technische Daten: automatischer Quervorschub stufenlos bis 9 m/min, Tischgeschwindigkeit stufenlos bis 21 m/min, Kriechgang 0,5–8000 mm/min; Schleifscheibe Ø225x25 mm, Drehzahlen 1000–2700 t/min; Schleifspindelmotor 1,8 kW; Anschluss 3x 380 V 50 Hz; Gewicht ~800 kg; Abmessungen Maschine 1000x700x1500 mm; Elektroschrank 800x600x1500 mm. Zubehör: Kühlmitteleinrichtung, Magnetplatte 500x200 mm, Abrichtvorrichtung, Schleifscheibe mit Flansch, Spritzschutz. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizin und Uhrenbau. Technische Daten ohne Gewähr

TRIPET MHPE 500 ist eine Flachschleifmaschine hoher Präzision, mit großer Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 600×200 mm; Schleiflänge 500×200 mm; Schleifhöhe 300 mm; Wege X 530 mm, Y 220 mm; Schleifscheibe Ø225×25 mm. Daten: Scheibendrehzahl 1.000–2.700 1/min; Spindelmotor 1,8 kW; stufenlose Vorschübe (Quer bis 9 m/min, Tisch bis 21 m/min); Kriechgang 0,5–8.000 mm/min; Anschluss 3×380 V 50 Hz; Gewicht ~800 kg; Abmessungen 1000×700×1500 mm. Zubehör: Hydro-Elektroschrank, Kühlmitteleinrichtung, Lampe, Zentralschmierung, Spritzschutz. Geeignet für enge Toleranzen; Branchen: Automotive, Uhrenbau, Werkzeugmaschinen, Luftfahrt. Technische Daten ohne Gewähr

IXION TL 500 SVA ist eine Tischbohrmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit bei Bohrarbeiten. Bohrtiefe max. 480 mm; Tisch 650×410 mm; Spindelaufnahme 2 CM; 8 Stufen von 240 t/min bis 2400 t/min. Maschinengewicht ca. 680 kg; Abmessungen L1190×B2440×H1600 mm. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

P.RIES 500 D/280 ist ein Staubsauger mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Angesaugte Luft: 80 m3/min; Ansaugstutzen Ø 80 mm; Abmessungen: Länge 500 mm x Breite 550 mm x Höhe 2200 mm. Anschluss: 50 Hz 3x 240 Volt. Entwickelt für effiziente Staubabscheidung und zur Unterstützung enger Toleranzen; geeignet für Werkstätten, Fertigung, Automobil-, Luftfahrt- und Medizintechnik. Technische Daten ohne Gewähr

TRIPET MHPE 500 ist eine Flachschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsvermögen: Tisch 600×200 mm, Schleiflänge 500 mm, Schleifbreite 200 mm, Schleifhöhe 300 mm; Achsen: X 530 mm, Y 220 mm. Technische Daten: Tischgeschwindigkeit stufenlos bis 21 m/min, Quervorschub stufenlos bis 9 m/min, Kriechgang 0,5–8000 mm/min; Schleifscheibe Ø225×25 mm, 1.000–2.700 min-¹; Schleifspindel 1,8 kW; Anschluss 3×380 V 50 Hz; Gewicht ~800 kg; Abmessungen Maschine 1000×700×1500 mm, Steuerung 800×600×1500 mm. Zubehör: Hydro-Elektroschrank, Papierfilteranlage, Magnetplatte 500×200 mm, Zentralschmierung. Erreicht enge Toleranzen; Anwendungsbereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

BOEHRINGER / VDF DUE 500 ist eine Mechanikerdrehbank, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsmaße: Spitzenhöhe 240 mm; Spitzenweite 1500 mm; Drehdurchmesser über Planschlitten 285 mm, über dem Bett 500 mm, in der Kröpfung 540 mm; Spindelbohrung 62 mm; 24 Stufen, von 11.2 t/min bis 2240 t/min. Technische Daten: Spindelmotor 11 kW; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 3400 kg; Abmessungen L3200 x B1500 x H1400 mm. Zubehör: 3-Backenfutter; Dreibacken Lünette aufklappbar; Schnellwechselstahlhalter. Erreicht enge Toleranzen; typische Einsatzbereiche Automobilindustrie, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr