engel 500 used for sale

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg

BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 Item #: Usm-239 Category UHT Plants BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 TECHNICAL DATA: Tetra Pak Automated uht for high acid beverages. The heat treatment in the steriliser is base on plate heat exchanger. TEMPERATURE PROGRAM: FOR TEA: 5Brix Heating: 25°C to 140°C (4 seconds) Cooling: 140°C down to 25–80°C FOR JUICE: 12Brix Heating: 25°C to 120°C (30 seconds) Cooling: 120°C down to 25–80°C CONDITION: B

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Height 2260 mm Width 1430 mm Length 2130 mm Weight 1400 kg Capacity 530 l Electrical Supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless Steel, Acid Resistant Agitator Type Paddle Agitators Load 350 kg Product ejection Manually opened flaps, front Loading Pole loading, freestanding Stirrer type Open stirrer Number of shafts Single shaft Comes with a loading column for 200 L battlements.

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

General SKU413X1251 MakeCelsius LocationBarneveld CEcheck TypeCWR500 Pressure Working pressure2.6 Bar Working pressure jacket2.6 Bar Technical specs Max. temperature140 °C Main Features MaterialStainless steel Motor9.2 KW Specified Features - Continuous dryer Screw dryercheck (screw heat exchanger) Double shaftcheck Continuouscheck Capacity1500 kg/h Product inletDN150 Manhole440 x 330 mm Product outlet250x700 mm With jacketcheck 25 l. Shaft can be heatedcheck Max. temperature140 °C Motor9,2 kW, 400/690 volt, Screw speed6.4 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.610269.C Year of construction2011 Mounted on framecheck With switchcheck Floorspace9,027x1,10 m Total height1,90 m Weight6210 kg Extra Specificationsinternal volume 2x 550 l., , steam heated Continuous dryersNew arrivalsCelsiusDryers > Continuous dryersNew  ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

General SKU322X551 LocationBarneveld CEcheck MakeGero Main Features Materialstone Max.temp.1100 °C Specified Features - Drying oven Drying ovencheck Max. temperature1100 °C Number of compartments:1 Internal width500 mm Internal depth250 mm Electric capacity6 kVA, 400 V Number of doors:1 With fancheck Motor0,25 kW, 230/400 volt, 2850 rpm MaterialGlass, stone Information TypeDRSR-A-200-500/11 No.200801042Drying ovensNew arrivalsGeroDryers > Drying ovensNew arrivalsBrand > Gero What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU438X1385 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor18.5 KW Length1100 mm Specified Features - Stirrer Stirrercheck Shaft length1100 mm Sizes stirring headø 250 mm Motor18,5 kW, 400 V, 2935 rpm Mounted on supportcheck MaterialStainless steel Information MakeYstral Serial266680913 TypeY 18.500 S/GD7-4 TDS Year of construction2013 Floorspace1.00 x 0,41 m Total height2,10 mStirrersYstralMixers > StirrersBrand > Ystral What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice. MiscellaneousSiemens - ElmoMiscellaneous > MiscellaneousBrand > Siemens - Elmo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU397X1148 LocationBarneveld CEcheck MakeDe Dietrich TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume499 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 1000 x 1060 mm Dished bottomcheck Dished top sidecheck Manhole300x400 mm Top connectionscheck Outletcheck With jacketcheck (135 Ltr.) Max. temperature— 10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.54020 / 71431 Year of construction1982 / 2011 Mounted on legscheck Floorspace1,3 x 1,3 m Total height2,74 m Weight2000 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is ...

General SKU397X1149 MakeDe Dietrich LocationBarneveld TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume500 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 800 x 1060 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN80 With jacketcheck (135 Ltr.) Max. temperature—10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.58632 Year of construction1991 Mounted on legscheck Floorspace1,1 x Total height1,06 m Weight1600 kg Technical specs Extra information135 Ltr. 6 bar —10 / 200 °CGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth ...

General SKU376X935 MakeBecomix TypeDH-500 LocationBarneveld CEcheck Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drivecheck (freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) Information No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specificationsin-line colloid-millInline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working conditio ...

General SKU202X016 MakeABL Anlagentechnik/ OFRU LocationBarneveld TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Distillation Capacity510/55l Information No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgearcheck ( as is) ATEX compatiblecheck Extra SpecificationsWas used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as wellDistillationOFRUColumns > DistillationBrand > OFRU ...

General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5065 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHerma ...

General SKU300U578 LocationBarneveld MakeMemmert BmbH Main Features MaterialStainless steel Volume108 Ltr. Max.temp.220 °C Specified Features - Drying oven Drying ovencheck Max. temperature220°C Number of compartments:1 Capacity108Ltr. Internal width560mm Internal depth400mm Internal height480mm Electric heatingcheck Electric capacity2kW Number of doors:1 With trayscheck MaterialStainless steel 1.4301 (304) Information TypeUE500 No.911229 With switchcheck(as is) Floorspace0,75x0,65m Total height0,87m Weight100kgDrying ovensMemmertDryers > Drying ovensBrand > Memmert What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU371T1118 LocationBarneveld MakeEdwards Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm Information TypeA38513935 Mach.No.297 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump. Consisting of: Edwards Mechanical booster model EH 500A Edwards High Vacuum Pump model E2M 80 Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...

Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m  ...

Cutting height: 125x220 mm machine weight ab.: 450 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions

Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.

Key data: 510 mm, 3000 mm, 4 St.

HOFMANN AHW 500 YOC 1991 Motor power: 4.0 kW Rated current: 9.5 A Max. planing width: 510 mm TERSA knife shaft (4-knife shaft) Integrated auxiliary stop SUVAMATIC knife shaft protection Joining strip with fastening rail Table length: 300 cm Table height: 84 cm Suction nozzle: 140 mm 4 pcs new knives Drive belt renewed The electrical system was renewed by the previous owner The machine does not have an engine brake. Transport dimensions (approx. dimensions): L: 312 cm W: 140 cm H: 115 cm Weight approx. 900 kg

BINOVA WATER RING PELLETIZER, constructed in AISI 304 stainless steel, for HDPE LDPE LLDPE PC PP PS ABS, horizontal type, throughput rate 800-1200 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 2003, Offered checked and reconditioned, See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: 5 weeks time, capacity: 1.500 kg/h, conditions: reconditioned

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details.

General SKU201T021 MakeUmformtechnik Hausach GmbH Type500 ltr IBC with stirrer LocationBarneveld Pressure Working pressure0.2 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure0.2 Bar Specified Features - Vertical tank MaterialStainless steel 1.4301 (304) Closed vertical tankcheck Capacity600 ltr (nett 500 ltr) Vessel sizes900x1080 mm With covercheck Conical bottomcheck Manholedia. 40 mm Top connectionsdia. 45 mm (3x) Outletdia. 52 mm With propellor stirrercheck Motor0,55 kW 220/380 Volt Information No.105588 Year of construction1993 Floorspace1,1x0,9 m Total height1,5 m Weight150 kgVertical tanksUmformtechnikTanks > Vertical tanksBrand > Umformtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Fine Impact Mills MaterialMild steel Information No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details.

General SKU345S815 MakeR&M Tycon Technoglass Spa No.10887 Year of construction2004 Mounted on legscheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialGlass Volume576 Ltr. Pressure3.5 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Notified body(TuV) Capacity500 Ltr (576 Ltr) Vessel sizesdia.1000 x646mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN100, DN80 OutletDN50 Max. temperature-30/200 degr.C. Information LocationBarneveld Floorspace1,5x1,5 m Total height1,2 M Weight750 KG CEcheckPressure vesselsTycon ItalyTanks > Pressure vesselsBrand > Tycon Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...

This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details.

General SKUR1133 MakePaul Schwingel GmbH (D) LocationBarneveld Type500 ltr Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor6.8 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Open stirring vesselcheck Capacity550 ltr (nett 500 ltr) Vessel sizesdia. 800x1100mm Dished bottomcheck Flat top sidecheck With cover700x240mm With jacket(150 ltr) Max. temperature200 degr. C With anchor stirrercheck With paddle stirrercheck Motor6,8 kW 220/380 volt (Ex) Speed mixing shaft62 rpm Information No.963340 Year of construction1997 Mounted on legscheck Floorspace1,3x1,2 M Total height3,3 M Weight900 Kg ATEX compatiblecheckStirring vesselsPaul SchwingelStirring vessels > Stirring vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working con ...

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

centre distance: 2.500 mm centre height: 250 mm grinding wheel diameter: 600 mm Total travel of the grinding support: 320 mm spindle speeds: 50 - 450 mm tool adaptor: MK5 tail stock: MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

max. format 51 x 33 cm Year of construction 2012 Stacking delivery Palamides Alpha 500 Double benefit Automatic format recognition Waste Rejection Vibrating device Pressing station Roller table Delivery date: immediately from stock Price on request. Worldwide Delivery & Installation

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1150 , Powder outlet height (mm): 695

Allgaier vibrating screen, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 380/400V , Dimensions (mm): 1100x700 H 1100, Powder outlet height (mm): 815

Allgaier vibrating screen, Sieve diameter:: 470 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Electric:: 230/400 V , Engine: Elektror Motor , Dimensions (mm): 1100x700 H 1200, Powder outlet height (mm): 765

General SKU224T201 LocationBarneveld MakeJorns Main Features MaterialStainless steel Volume5000 Ltr. Specified Features - Stirring vessel MaterialStainless steel Stirring vessels Horizontal tankcheck Capacity5000 Ltr. Sizes1420x1560x2620 mm Dished frontscheck Manholedia. 400 mm Top connectionsDN 65, DN 40 OutletDN 65 Max. temperature50 °C With propellor stirrercheck Motor2,6/7 kW 380 Volt Speed mixing shaft470/950 rpm. Information No.31959/1 Year of construction1983 Mounted on legscheck Floorspace1,5x2,7 m Total height2,2 m Weight600 kgStirring vesselsJornsStirring vessels > Stirring vesselsBrand > Jorns What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU334N528 LocationBarneveld MakeHenschel TypeHU-500 Main Features MaterialAluminium/Stainless steel Volume500 Ltr. Motor15 KW Specified Features - Universal mixer Universal mixercheck Capacity500 Ltr Vessel sizesdia.900mm x650mm With covermanual operated Pneumatic operated outlet 300x200mm With motor15,0 KW, 380 Volt Rotor speed134 rpm Information Mach.No.821197 Year of construction1976 Mounted on framecheck Floorspace2,4x1,8 M Total height3,0 M Weight1100 KGUniversal mixersHenschelMixers > Universal mixersBrand > Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...