126,737 used machines on RESALE, but how to find them? Machine Search
Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t
Used engine few hours Very good condition !
Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 170 kg,
x-travel: 1.020 mm y-travel: 510 mm z-travel: 510 mm control: MSC 501 Fanuc table surface area: (APC) 1.200 x 480 mm max. table load: (APC) 550 kg Main spindle:: turning speed range - milling: 10.000 U/min power capacity - milling spindle: 22 / 18,5 kW tool taper: BT 40 Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8 kg rapid traverse: 32 m/min feed: 1 ~ 16.000 mm/min Tipp feed: 0 ~ 1.260 mm/min spindle bearing diameter: 85 mm total power requirement: 59,5 kVA weight of the machine ca.: 6,9 t dimensions of the machine ca.: 3,9 x 2,7 x 2,9 m Documents: Chip conveyor: 2x Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: pallet changer: 2 pos. CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT ...
Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory - Soundproofing hood - CE compliant
CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz ...
Bread slicer Rego Rotec 500 Year of Make: 2012 Condition: cleaned & tested Passage width: 230 mm Passage height: 140 mm Insertion depth: 500 mm Cutting thickness: 3-25 mm Max. number of slices: 145 per min. Dimensions WxDxH: 1127 x 705 x 1090 mm
Dosing unit Gorreri DVG 500 Year of Make: 2011 Condition: functional Suitable for filling, spraying or decorating various types of products from doughs, creams, jams and other liquid products Output: max. 40 strokes per min Compressed air: 250 l/min (6 bar) Dimensions LxWxH: 1200 x 600 x 1850 mm Weight: 80 kg
- Heating coil 250 kW - Voltage: 575 V / 60 Hz More information on request!
X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Offer 23145 Technical data: - Flat steel shears - blade length 420 mm - For flat material 400 x 15 mm - Profile steel shears - no knives available - L-steel at 90° 110 x 10 mm - at 45° 65 x 8 mm - T-steel at 90° 90 x 10 mm - Steel bar shears - no knives available - Round steel / square steel 35 / 32 mm - Notching device - for material up to 12 mm - Triangle notch T 60 mm - Hole punch - punching force approx. 500 KN - - Stroke infinitely variable 0 - 40 mm - Punches in steel up to 30 mm Ø in 15 mm - Projection 410 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1400 x H 1800 x D 700 mm - Weight approx. 1800 kg - with: - various punches + dies - Support stop table - Triangular notching device - 2 St. E. footswitches
Description Calendar or ring binder Punching tool 2 pieces, round hole 4mm, pitch 3:1 with thumb hole suitable for Renz Super 500
Description Palamides Stacking Delivery Alpha 500 Year 10-2011 for mark-free laying Stahlfolder Interface Output Table
Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigeration air dryer with approx. 28,000 operating hours Fully automatic, internally completely piped and wired compact system, single-stage oil-injected compression, air-cooled, soundproofed Operating pressure 10 bar Volume flow 40 m3/hour Output 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN
General SKU050C545 MakeBHS Sonthofen GmbH TypeAutopress AP-500/14/20/VA No.F-00946-305-01 ATEX Year of construction2005 LocationBarneveld Specified Features - Filterpress Material finishMirror polished inside Pressure Working pressure12 Bar Main Features MaterialStainless steel Pressure12 Bar Surface4.7 m2 Filterpresses Filter pressGas-tight, fully automatic filter press(1x) Filter surface4,76 m2 Stainless steel plates(1.4404) Number of platens14, dia. 510mm Cake capacity52 l, Max. Temp. -30/+200 Degr. C. Hydraulic closingcheck With hydraulic unitcheck Motor4,0 KW, 400/690 Volt (Ex) Automatic openingWith hydraulically operated scraper MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information Floorspace3,6 x 1,5 m Total height3,7 m Weight4000 kg CEcheck ATEX compatiblecheck Extra SpecificationsBHS Autopress filters are discontinuous, fully ...
REALUX BK 5000 Trinocular Microscope - 5 Objectives New equipment in its original packaging Model: BK 5000 Trino Trinocular head Eyepieces: WF 10X-20 mm Eye diameter: 23.2 mm XY plate: Size 175 x 145 mm, Displacement 78x55 mm - Object guide for 2 blades 3W LED lighting 5 infinitely corrected plan-achromatic IOS lenses: IOS PL ACH 4×/0.10 W.D. = 12.10 mm IOS PL ACH 10×/0.25 W.D. = 4.64 mm IOS PL ACH 20×/0.40 W.D. = 2.41 mm IOS PL ACH 40×/0.66 W.D. = 0.65 mm IOS PL ACH 100×/1.25 (oil) W.D. = 0.12 mm
OHAUS Achiever 5000 Vertical Rod Stirrer For laboratories Model: ACHIEVER 5000-60 (E-A51ST060) Speed: 30 to 2,000 rpm Capacity: 40 L Display: LED Voltage: 115/230 VAC Power: 190 W Shaft Diameter (Metric): Up to 8.5 mm Dimensions (L x W x H): 235 x 90 x 285 mm Delivered without rod In excellent aesthetic and working condition
General SKU004Y029 MakeSeitz TypeEF 100/500 CW No.8402 Year of construction1969 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.8 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,75 m² Capacity580 l Plate sizesø 980 mm Top connectionscheck Liquid outletDN50 With jacketcheck Max. temperature165°C MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld Floorspace1,5x1,5 M Total height2,1 MDiscountNutsche filtersSeitz - WerkeDiscountFilters > Nutsche filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...
Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, DRO, elecro-permanent magnetic plate
used
Maximale afmetingen van het werkstuk: 800 x 1000 mm tabelindexering elke 0,001° afstand van palletcentrum tot spindelneus: 70 gt; 810 mm afstand van palletoppervlak tot spindelcentrum: 100 gt; 830 mm Hogedrukkoeling via de spindel (70 bar) Uitgerust met Palletech High Rise System = uitbreidbare palletopslag met 2 niveaus voor 12 pallets. spanentransporteur X-axes: 730 mm Y-axes: 730 mm Z-axes: 740 mm Table dimensions: 500 x 500 mm (2x) Max weight on the table: 700 kg Admission in spindle (ISO): BT40 Power on the spindle: 30 kW Toolstore: yes Tools: 160 positions Frequency : 18000 rpm Number of pallets : 12 pallets Length: 9000 mm Depth: 8000 mm Height: 2850 mm Weight: 12,4 ton
Pressure power: 10 bar Pressure power: 1.120 l/min. output: 7,5 kw Piston compressor system Renner type RIK 500/1500 incl. additional boiler and accessories for generating compressed air for small to medium-sized operations. Including dismantling and loading. Fixed loading date: 15.06.2026. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 5500 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 320 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 721,7 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/cummins-kta19-g3-generator-500 kva-used/637, , = More information =, , Empty weight: 3.500 kg, Type number: KTA19-G3 GENERATOR 500KVA
General SKU361T1082 MakeFerrum LocationBarneveld CEcheck TypeDSZ-OR/T 1000/500 Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Rubber linedhallar chamber Perforated basketcheck Capacity200 Ltr. Basket sizesDia 1000x500 mm Max. loading weight250 kg Hydraulic operatedcheck Liquid outletDia. 100 mm With hydraulic unitcheck Wandfluh HN10-6nvh, motor: 0,75 kW, 230/400 volt, 1380 rpm Motor11kW, 400/690 volt, 1475 rpm Max. basket speed1200 rpm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.414-092 396 Year of construction2001 Mounted on foundation platecheck Floorspace1,8x2,2 m Total height1,7 m Weight2400 kg ATEX compatiblecheck Extra SpecificationsRevised machine! Including: new motor, pulleys, belts, shaft seal, and bearings. Filter area 1.57 m². C ...
macchina bi-iniezione iniezione verticale con vite diametro 20mm paranco portata 200kg altezza da terra 3800mm
Granulatore completo di mulino, aspiratore e struttura riempi big bag. - Lunghezza lame 800 mm
Forza di chiusura: 60T - Dimensioni della piattaforma: 700 x 800 mm Apertura della piattaforma: min. 560 mm – max. 1200 mm Corsa di apertura: 550 mm - Corsa verticale della piattaforma: 300 mm Larghezza massima dello stampo: 800 mm - Altezza massima dello stampo: 1000 mm Spessore minimo dello stampo: 670 mm Diametro della vite: 90 mm LD 24 Ugello miscelatore Capacità di estrusione: 270 kg HDPE Potenza del motore: 97 kW - Zone di riscaldamento: 4 Potenza di riscaldamento: 27,1 kW Capacità di stoccaggio: 8 L Peso massimo di stoccaggio: 6,1 kg HDPE Diametro minimo della filiera: 100 mm – max. 220 mm Numero di punti di controllo della preforma: 100
Delfin Auriga 500 Flow wrapper Serial: 11110 2016, flow wrapper, jaw width 230mm, up[ to 120 cycles per min, infeed length 2100mm, overall length 3700mm, HMI touch screen controls, reel holder up to 500mm film,
Machining center in vertical design with automatic return Workpiece dimensions: Length: 200 to 3050 mm Width: 50 to 1250 mm Thickness: 8 to 80 mm weight max 60 kg Performance - 2x vertical drilling unit separately controllable with variable speed. right left V10/32mm. 2.3 kW. Drill length 70 mm, D= max 35 mm - 2x horizontal drilling unit, 6 spindles in X direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - 2x horizontal drilling unit, 2 spindles in Y direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - Grooving saw unit X-Y can be swiveled 0?/90? saw diameter 125 mm, rpm 1500-7500 frequency controlled - Dowel insertion station for automatic insertion of dowels on the two transverse workpiece edges 1x left side / 1x right side glue pump, vibrating guide for dowels 8 x 35/40 mm - plau ...
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 44400 € : 848.04 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7,5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm ...
This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details.
This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details.
amplification -fold: 10-fach diameter: 500 mm workpiece height max.: 210 mm digital readout: 2 Achsen MITUTOYO travel x / y: 200 / 100 mm table-size: 530 x 250 mm glass plate - dimensions: 270 x 170 mm voltage: 230 V weight of the machine ca.: 210 kg dimensions of the machine ca.: 0,80 x 1,05 x 1,70 m - Serial-No.: --- - 2-Axis digital readout The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cone wrapping machine HWM 500 4C for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Winding machine with infeed belt 1 man waitress for all doughs for wrapping Cone wrapping machine with 500 mm belt width only DGUV V3 tested by us Connection 400V, 16A-CEE plug NEW Machine & SAB Tested with warranty + spare parts service
AUTOMATIC DIGITAL REFRACTOMETER MDEL : RX-5000 ALFA BRAND : ATAGO TYPE : TOUCH SCREEN SCALE : Refractive index RANGE : Refractive index (nD) 1.32420 to 1.58000 BRIX : 0.000 to 100.00% SOLUTION : Refractive index (nD): 0.00001 Brix 0.01% temp 0.01C ACCURACY : Refractive index (nD): 0.00004 Brix 0.03% TEMP CONTROL RANGE : 5.00 to 75.00 C DIMENSION & WEIGHT : 37 x 24 x 14 6.6 kg POWER SUPPLY : AC100V to 240 V, 50/60Hz CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove
; Power [PS]: 680; Gross weight [kg]: 14240; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input: , - AC socket: 3P/5W, 1x500kW, 5x16kW , - AC copper: 3P/4W, 500kW , - DC socket: 110kW, Power Output: , - AC socket: 3P/5W, 1x500kW , - AC socket: 1P, 1x16A; 3P, 1x32A , - AC copper: 3P/4
feed pressure: 10.0 bar Effective free air delivery: 1.000 L/min motor: 400 V 0: 500 Liter Number of working hours: 3.484 h total power requirement: 7.5 kW weight of the machine ca.: 326 kg range L-W-H: 1540 x 620 x 1340 mm current new price approx. 8.000 euros last inspection / maintenance in 09/2025 special price on request Equipment: - 7.5 kW screw compressor on 500 l tank incl. compressed air dryer - low residual oil content dry compressed air - oil-injected soundproofed - Suitable for continuous operation in industry Compressed air requirement with a delivery rate of up to 1.00 m³/min - compact design and low noise level of only 65 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment.
radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Connection: Input 600x1220 mm -Connection: Output 680x680 mm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg
used
Manufacturer: Haas Model: HSZ-R 500 x 1800 Year of Manufacture: 2008 Type of Machine : Wet Hammer Mil Condition : Used Technical Specifications - Rotor diameter: 1300 mm - Machine inlet width: 1800 mm - Screen perforation (as delivered): 16 mm diameter - Number of hammer tools (full complement): 440 pieces - Grinding bars zone 1 (Mahlleisten Ml.1): 54 pieces - Grinding bars zone 2 (Mahlleisten Ml.2): 42 pieces - Total machine weight (including motor): approx. 12,350 kg - Feed trough weight: approx. 1,100 kg - Sound power level (at full load, 5 m distance): 90 dB(A) - Hydraulic unit (hood opening system): 1.5 kW, 230/400 V, 50 Hz Overall Dimensions - Length: 4790 mm - Width: 2700 mm - Height: 4145 mm Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
