128,673 used machines on RESALE, but how to find them? Machine Search
Brown & Sharp 500 x 500 mm
Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.
Electric clamping machines for RENZ RING WIRE® comb binding. Binding without effort. The fast and user-friendly solution for small, medium and time-critical runs. The machines are available in versions with a working width of 500 mm.
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Only 4400 operating hours Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg
max. workpiece diameter: 500 mm threading length: 5000 mm max. module: 10 min. module: 2 workpiece dia. over saddle: 250 mm center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece spindle bore: 102 mm thread pitch: 1 - 800 mm speed of workpiece (milling): 0,0034 - 2,65 U/min feeds - longitudinal: 0,256 - 195 mm/min feeds - rolls: 0,0256 - 5,17 mm/WU hob turning speeds: 45 - 900 U/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 8,5 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 7,0 x 1,7 x 1,6 m Thread-, Worm-,gear shafts- and Spline Milling Machine with : equipped with: - Thread Milling Head ApGs - Counter Stay - 1 Bush Rest - 2 Steadies - Cabinet with change Gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS & FREUDENBERG Description: Dewatering Screening Machine Type: "Roberg" 1600/5000/1 Available devices: 2 pcs identical Year of manufacture: unknown (90s) Screen length: 5,000 mm Screen width: 1,600 mm Number of screen decks: 1 pc. SPECIFIC COMMENT - No cracks, no deformations - Incl. outlet tray, drive and springs
Werner & Pfleiderer dough divider/weigher 1 or 2 chamber machine (depending on weight) Weight ranges: approx. 300 - 2,600 g/piece (1 chamber) approx. 150 - 1,200 g/piece (2 chambers) Output up to 3,200 pieces per hour (2 rows) with TOUCH control with digital hour counter with lubrication with extended hopper for approx. 200kg dough Suitable for a variety of doughs: Wheat doughs, mixed doughs, grain doughs, whole grain doughs, firm doughs (e.g. pizza), soft doughs (e.g. baguettes, etc..) Dimensions: 220x170 H:190cm - Tested and cleaned
turning diameter over bed: 1020 mm turning diameter over slide rest: 660 mm turning length: 5000 mm min./max workpiece dia.: 210 - 880 mm spindle diameter: 115 mm spindle taper: 140 spindle turning speed range: 5 - 500 U/min feeds - longitudinal: 0,20 - 3,05 mm/U feeds - cross: 0,07 - 1,04 mm/U slide adjustment: longitudinal: 5000 mm cross: 680 mm workpiece weight: 5000 kg main drive motor: 22 kW thread - mm pitch: 1 - 120 mm thread - module: 0,5 - 30 thread - inch: 28 / 1/4 spindle bore: 84 mm tail stock: tailstock quill taper MT: 5 tailstock quill stroke: 300 mm total power requirement: 27 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: 6,5 x 2,2 x 1,8 m - 1 fixed bezel - Faceplate Ø 1000 mm - 4-fold steel holder - Tailstock - 2-track bed design The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 2000 mm turning length: 5000 mm turning diameter over slide rest: 1050 mm turning diameter over bed: 2000 mm faceplate diameter max.: 1200 mm spindle turning speed range: 1,6 - 250 U/min main drive motor: 110 kW max. workpiece weight between centres: 25 t workpiece weight max.: 40 t centre height: 700 mm swing diameter max. over bed cover: 1140 mm max.workpiece weight:each extra steadyrest: 3000 kg total power requirement: 120 kW weight of the machine ca.: 55 t dimensions of the machine ca.: - m - Face Plate Ø 1200 mm - Coolant - Rapid travel - Tail stock mit Face Plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.
5-axis machining center for machining aluminum profiles. Max. length: 7,500 mm Min. W x H: 30 x 30 mm Max. W x H: 400 x 300 mm Description: -Mill -Drill -Saw -Jack -Tapping - Chip machining 16 tool positions
An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.
ZERMA PM 500 PVC PULVERIZER, average throughput rate 500 kg/h, Disc diameter: 500 mm, 24 kW drive, Total installed power: 79 kW (200 A), including metal detector, Vibrating screen, 2-place big bag filling station, Loading screw and cyclon, Centralized dust extraction system Donaldson TDS8 year 2018, N.2 new spare discs, Complete valve and piping system, Test possible, installed power - used power in work: about 60-65% : 79 kw, conditions: testable
DUAL-SHAFT HYDRAULIC MULTI-PURPOSE PRIMARY SHREDDER, Loading hopper, bespoke to project and feeding system, Sturdy supporting structure in carbon steel height 2 mt from floor, with catwalk and rails, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Knives : 75 or 100 mm thick 4 hooks or bespoke, Hydraulic motor 75 kw, 400 V/50 Hz, hydraulic power unit,, electrical control panel with PLC and connection for remote assistance, automatic overload reversal with programmable number of reverse cycles, Delivery : about 4-5 months from confirmation (excluding Winter/Summer holidays), Complete with electrical drawings, User manual, CE compliance, Possible addition of loading and extraction belt with metal separator, width: 1.500 mm, Power: 75 kw
A Euromac doctor rewinder for unwinding and rewinding web materials on rolls is available. Web width: 450mm, max. speed: 400m/min, materials: paper/aluminum/composite materials, material thickness range: 30µm-100µm, max. parent roll diameter: 520mm, max. roll weight: 100kg, max. rewind diameter: 520mm, max. core/adapter inner diameter: 76mm/120mm. Including Häwa water cooling, floor scanner, and side safety fence. Documentation available. An on-site inspection is possible.
REF-2704 LLEAL MAX-MIX MM-500 VACUUM MIXER FOR LIQUID AND VISCOUS PRODUCTS Manufacturer: LLEAL Model: MAX-MIX MM-500 Year: 2000 Machine no.: 14890 Series: 3712 Electrical specifications: 49.8 kW/380 V/104 A/3+N+E/50 Hz Dimensions (in mm): See the drawing in the last picture. MAX-MIX MM-500 mixing, dispersion, emulsion and homogenisation system. The MAX-MIX processor is a multifunctional piece of equipment ideal for manufacturing liquid and viscous products that require dispersion, homogenisation and emulsion stages (in both solid/liquid and liquid/liquid processes) and that also require a complete deaeration, which is possible thanks to the internal vacuum circuit. The process can also include the heating or cooling of the products during their manufacture, the addition of solids and liquids in vacuum conditions, and the recirculation and discharge by positive displac ...
Müro A4/5000 block size press; good condition; cleaned and tested; Heat baffle; Stack increase; optionally with dryer. Block gluing machine Müro A4/5000; good condition; cleaned and checked; pile elevation; heating sheet; for option with heater.
x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 gebr. Boiler ------------------------------------ - mounted on frames - Manufacturer : LOOS, International Type : UL-S Capacity : 5,000 kg/h Operating overpressure : 18 bar Steam temperature max. : 204°C Year of manufacture : 1993 equipped with Weishaupt gas burner G50/2-A, ZM, gas control section, separate control cabinet, feed water pump, and the existing coarse and fine fittings.
Impressions=0 m, Condition= Good , Availability= 2025-11-03, Pile turner Max weight 500kg Top working condition
A VICTOR lathe 500x1000. Distance between centers: 830mm, center height over bed: 250mm, max. turning diameter: 500mm, longitudinal travel: 800mm, spindle bore: 80mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1200mm, weight: approx. 1500kg. An inspection can be arranged by appointment.
Used cheese-making kettle with a capacity 5000 liters, manufactured in Finland. Stainless steel.
Injection moulding machine for food and beverages caps
Injection moulding machine for PET preforms
A Hamba cup filling machine is available. Lanes: 4, max. cup diameter: 127mm, max. cup height: 130mm, nominal capacity: 9600cups/h. Machine dimensions X/Y/Z: approx. 10000mm/1700mm/2500mm, weight: approx. 5000kg. Documentation available. An on-site inspection is possible.
Washing machine Ultron UNPRZ-500 MPS No 21/9/0619 Year of manufacture 2022 Temperature control range washing, rinsing 20-80C Max Drying Temperature 100C Usable tunnel height 300mm Width 500mm Power of the washer heater 45.6kW Rinse aid heater power 53.2kW Power of the drying units 24kW Drying fan power 26kW Nominal power 185kW Weight 4000kg
DECOILER design: twin reel coil weight max.: 0.5 to max. diameter of coil: 1600 mm - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min
1 press system, manufacturer Exner, type EXSBZRD 500/100, built in 2002, drive power 121 kW, pressing force 5,000 kN, overhauled in 2018, stroke length max. 600 mm, working speed max. 16/30 mm/s, machine weight 82,000 kg, table size approx. 1,000 x 3,000 mm, control system, manufacturer Siemens, type Simatic Multipanel, separate two-hand control, upstream light barrier, manufacturer Sick, separate control panel, manufacturer Rittal, control system, manufacturer Siemens, type OP17, feed unit, manufacturer AMT, type WV400/160, year of manufacture 2008,control panel, control unit, manufacturer Rexrodt, separate switch cabinet system, additional transfer unit/material feed, vertical material buffer, 6-fold feed-through unit, oiling, manufacturer Ratiol/Stöber Find more here - / Contact us at -
Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
Pusher force: 120 t, Open box dimensions: 5000 x 2400 mm, Bale size: 800 x 600 mm, Engine: Electro, Engine power: 90 kW, Year of construction: 2011, Hydraulic: Parker Pumps and Valves, Operating hours: 7500 h
x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm rapid traverse: 1,2 m/min feed range: 5 - 500 mm/min creep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mm table - universal: ca. 620 x 320 mm table vertical adjustable: 350 mm weight of the machine ca.: 1200 kg dimensions: mm Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.
Stationary screw compressor with refrigeration dryer on 500 l container Specifications: Pressure 10 bar Volume flow 2000 l/min Voltage 400 V Drive power 15 kW Beh.-Vol. 500 l Weight 499 kg Noise 65 dB(A) Air outlet 3/4"i Dimensions (WxDxH) 1960x740x1725 mm Hint: ! without TÜV approval, container papers are not available
CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40; Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 T-Slot version: 4x185H8 Spindle Spindle speed rpm: 20000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: pinza doble Max. Tool Diameter: 70 With occupied neighboring places mm: 140 Tool Magazine: Matrix Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Custom Macro common variables (100) Synchronized tapping Preparación para trabajar con robot Robot EROWA Helical ...
Block size press Müro 5000/A4 WT; good condition; cleaned and tested; Heat baffle; Stack increase; with dryer. Block gluing machine Müro 5000/A4 WT; good condition; cleaned and checked; pile elevation; heating sheet; with heater.
General SKU300U599 LocationBarneveld MakeDriam TypeDriacoater 500/600 vario No.KD37310 Year of construction1995 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Coating pan MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Coating pancheck Coating installationcheck Capacitymax: 1: 77 Ltr., 2: 148 Ltr. Batch size30 kg Pan diameter1: 500 mm, 2: 600 mm Pan depth1: 460 mm, 2: 600 mm Cylindrical width1: 330 mm, 2: 470 mm Conical width1: 120 mm, 2: 120 mm In-/Outletdia. 200 mm Motor0,55 kW, 230/400 volt (EX) With frequency controllercheck (Typ VLT 2015) Pan speed5-27 rpm With electric heatingcheck With fancheck Motor2,2 kW, 380/660Volt, 2825 rpm (EX) With air filtercheck With spraying armcheck (Model 970) With dosing pumpcheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight850 kg CEche ...
General SKU209U082 LocationBarneveld MakeFriedhelm Stechel GmbH/Schrader Apparatebau GmbH TypeKC160-500 No.D30414 Year of construction2014 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter750 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Capacity± 6200 Ltr. Batch size500 Ltr. Pan diameterdia. 2000 mm Pan depth2000 mm In-/Outletinlet ø 750 mm, outlet ø 200 mm (discharge bottom) Pan can be tiltedcheck (with motor 0,55 kW (220/380 V) Motor5,5 kW (220/380-420 V) With frequency controllercheck With spraying armcheck Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight4500 kg CEcheck Floorspace3,7 x 3,3 m Total height3,2 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...
General SKU305U631 LocationBarneveld MakeFranke No.701263 Year of construction1964 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor2.2 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselcheck Capacity5000 Ltr. (max. ± 5340 Ltr.) Vessel sizesdia. 1800x2100 mm Dished bottomcheck Dished top sidecheck Manholedia. 450 mm Top connectionsDN40, DN25 (2x) Outletdia. 80 mm With anchor stirrercheck Motor2,2 kW Information Mounted on legscheck Floorspace1,8x1,8 m Total height3,25 m Weight850 kgStirring vesselsFrankeStirring vessels > Stirring vesselsBrand > Franke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...
General SKUR0380 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.141724 Year of construction1970 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 400 Volt Information Total height1,1 M Weight1020 Kg Floorspace1,1x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0378 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.135101 Year of construction1966 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Information Total height1,1 M Weight600 kg Floorspace1,0x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU327T863 LocationBarneveld MakeAT Hefele GmbH TypeSackaufgabestation Typ 500 No.75.170384-3 Main Features MaterialStainless steel Motor0.55 KW Specified Features - Bag dump station MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 Bag dump stations Metering screwcheck (DMN Westinghouse, typ: BL 175-1, 15 rpm., motor: 0,55 kW 220-240/380-415 Volt) With hoppercheck Capacity500 Ltr. Hopper sizesdia. 1200x750 mm (shape of cone) Inlet1200x470 mm Outlet175 mm With vibro motorcheck (0,18 kW 220-240/380-415 Volt, 3000 rpm. (Ex): Brabender Technologie KG) Information Year of construction2008 Mounted on legscheck Floorspace1,05x1,25 m Total height3,7 m Weight650 kg ATEX compatiblecheck Extra Specificationswith: flanged round filter (with suction: 1,1 kW 220-420 Volt) discharge unitBag dump stationsAT Hefele GmbHDosing units > Bag dump stationsBrand ...
pressure: 50 t throat: 610 mm total power requirement: 7,5 kW machine weight ab.: 1700 kg dimensions: 1500 x 650 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.
Belt withness; 1.500 mm. (new belt) - With new control-unit . Eddy current separator is overhauled, sandblasted and painted.
With new 1.000mm. wide belt. With new control-unit. Overhauled, sandblasted and painted.
Belt withness; 2.000 mm. (new belt) - With new control-unit . Eddy current separator is overhauled, sandblasted and painted.
We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) The scope of delivery includes: OSB boards, second choice Overall length: 2,500 mm Total width: 625 mm Thickness: 22 mm Panel size in m²: approx. 1.56 m² Total m² / package: approx. 50 m² Design: tongue and groove Number of units in the package: 32 pieces Base price m²: 9,24 € Hint: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Engine Brand: MERCEDES, Conditie: CORE, Nominal Power @ Nominal Rpm: 441 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 21930 cc, Qty Cylinders: 12 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 393 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-424-901-500-co re/763, , = More information =, , Type: Engine, Empty weight: 1.650 kg, Type number: OM 424.901-500
maximum number of results exceeded
please refine your search
